Zycoo CooVox U50 Quick Installation Manual
For Small and Medium Business
IP PHONE SYSTEM
CooVox Series-U50
www.zycoo.com
Quick Installation Guide
Quick Installation Guide
PWR S YS WAN LAN 4 3 2 1
4 3 2 1
SLOT2
SLOT1
CooVo x
IP Phon e S
ystem
1 Package Contents
2 Hardware Installation
2.1 Safety Precautions
2.2 Product Installation
2.3 Physical Connection
2.4 Led Definitions
3 Basic System Configuration
3.1 Web Login
3.2 Network Configuration
3.3 Choose the Module
3.4 Reset to factory
4 Further Configuration
Table of Contents
02
02
03
05
06
07
08
08
09
10
11
12
02
2 Hardware Installation
The followings are the instructions for setting up ZYCOO CooVoxU50 IP PBX. Please refer to the illustration and follow the simple
steps below to quickly install your IP phone.
Antenna(only for
GSM Module)
Power Adaptor
Thank you for purchasing ZYCOO IP phone system. These are the items
Included with your IP phone system purchase:
Two mounting brackets
and fittings
1 Package Contents
Warranty Card
IP PBX
Quick Installation
Guide
03
2.1 Safety Precautions
Notes:
To avoid any device damage and bodily injury caused by improper
use, please observe the following rules.
Keep the power off during the installation.
Use only the power adapter provided with IP PBX.
Make sure that the supply voltage matches the specifications indicated on the rear
panel of IP PBX.
To avoid the electric accident, do not open or remove the cover of IP PBX when it is
working as well as off the power.
Before cleaning the device, cut off the power supply. Do not clean it by the
waterish cloth, and never use any other liquid cleaning method.
Site Requirements
PWR SYS ETH USB 1 2 3 4
SLOT1 SLOT2
1 2 3 4
To ensure normal operation and long service life of the device,
please install it in an environment that meets the requirements
described in the following subsection. Please keep a proper
temperature and humidity in the equipment room. Too high/low
hu midi t y may lea d to b a d ins u lat ion, e lect rici ty lea ka ge,
m e c h a ni c a l p ro p er t y c ha n ge s a n d c o r r o s i o n s . To o h i g h
temperature may accelerate aging of the insulation materials and
can thus significantly shorten the service life of the device. For
normal temperature and humidity of the device, please check the
following table.
04
1 2 3 4 1 2 3 4
SLOT2
CooVo x
IP Phon e Syste m
Temperature
0 C~40 C
-40 C~70 C
Humidity
10%~90%RH Non-condensing
5%~90%RH Non-condensing
CooVo x
IP Phon e Syste m
The dust accumulated on IP PBX can be absorbed by static
electricity and result in poor contact of metal contact points. Some
measures have been taken for the device to prevent static
electricity, but too strong static electricity can cause deadly
damage to the electronic elements on the internal circuit board. To
avoid the effect of static electricity on the operation of IP PBX,
please attach much importance to the following items:
Dust the device regularly, and keep the indoor air clean.
Keep the device well grounded and ensure static electricity has
been transferred.
Electromagnetic Interference
PWR SYS ETH USB
SLOT1
Environment
Operating
Storage
PWR SYS ETH USB 1 2 3 4 1 2 3 4
SLOT1 SLOT2
Clearness
Loading...