Zycoo CooVox 4FXO, CooVox 4FXS, CooVox 1PRI, CooVox 4GSM, CooVox 2GSM Settings Manual

PART 1 Read Me before Installing

Host Device

Available Modules

CooVox-U20

2FXO / 2FXS / 1FXOS / 1GSM/ 1UM

CooVox-U50

4FXO / 4FXS / 2FXOS / 2GSM / 4GSM

1PRI (for Slot1 only) / 4BRI (for Slot1 only) / 1UM / 32EM

CooVox-U100

4FXO / 4FXS / 2FXOS / 2GSM / 4GSM

1PRI / 4BRI (for Slot1 only) / 1UM / 32EM

Standard Module

4FXO

4 FXO Ports Module

4FXS

4 FXS Ports Module

2FXOS

2 FXO Ports & 2 FXS Ports Module

2GSM

2 GSM Ports Module

4GSM

4 GSM Ports Module

1PRI

1 PRI Port Module

4BRI

4 BRI Ports Module

Extended Module

1UM

3G WCDMA Module

32EM

Echo Cancellation Module for 32 Channels

The most innovation of CooVox Series IP Phone System is the modular design. You can purchase the host

device and modules separately. For friendly use of CooVox, there are standard modules and extended

modules for option. Here we provide Module Setting Guide as reference.

Notice:

1. Only ZYCOO Standard and Extended Modules are allowed to install on ZYCOO CooVox IP Phone Systems

2. Slot 2 on U50 is not available for 1PRI/4BRI; Slot 2 on U100 is not available for 4BRI

3. Make sure the device is powered off before installing modules

4. Peel off the insulating film on the connecting finger of modules as long as there is

5. Make sure the modules are clean and right side up, always install gently

6. Tighten the modules up with the screws coming togethe

1

PART 2 Installation of Standard & Extended Module

On CooVox-U20

2