ZyCast Technology ABT200 Users Manual

Audio Bluetooth Set

Manual

ABT-210 Bluetooth Transmitter
ABT-220 Bluetooth Receiver
VVM-230 Vocal Vibration Microphone

Bluetooth LED

Bluetooth

re-pair button

LED Display :

Bluetooth LED : Blue LED flashing quickly when turn on the power, the LED flashing

Power LED

Battery LED

Laser Pointer

button

Laser pointer

indication

Laser Pointer

hole

slowly after connected.

Power LED : Power LED always on after turn on the power
Battery LED : RED LED flashing when battery low
Green LED flashing when battery poor contact or charging suspended

Green LED always on while charging battery
LED off when battery normal or battery fully charged

- 1 -

Buttons :

Press this button to r-pair the units. (The product is default paired. They will
automatically making the connection after turn on the power . Please DO NOT pres s
this button unless necessary.)

Press this button to enforce Laser Pointer. (ABT-210 function button)

Connection :

1. Use Phone Jack cable to connect ABT-220and VCM AUX Phone Jack socket.

2. Connect VVM-230 Vocal Vibration Microphone to ABT-210.

1. Turn on ABT-210 and ABT-220, Bluetooth LED will flashing quickly.

2. The product is default paired. They will automatically making the connection after turn on

the power. You will hear two short toot sounds when connected, and the Bluetooth LED
will become flashing slowly. Now, you can use the vocal vibration microphone to
broadcast. Please adjust the volume to suitable level.

3. There will be a long beep sound whenever disconnected, and the Bluetooth LED will

become flashing quickly.

Remark :

1. Accessory NP60 battery is 3.7V, at least 1000mAh Li-ion battery with stand
by time for more than 16 hours.

2. Please fully charge of the battery until the battery LED off before the first time
using of the units. DO NOT use the units while in charging.

Accessories :

1. Battery * 2

2. Phone Jack cable * 1

3. Household power adaptor assembly for battery recharging * 1

4. Product hanger * 1 (gift)

- 2 -