Z-Wave PAN08 Service Manual

PAN08 Roller Shutter Controller

Fe a tu r e s

Adopt newest Z-wave 400/500series chip, support multichannel operation and
higher data rate(9.6/40/100kbps)

Adopt Z-Wave protocol to secure the success of wireless two way communication

Higher RF output power (+2.5dBm output power as compared to -2.5dBm 300
series Z-wave module) to enhance the communication range

With zero crossing technology to extend the number of switching

Slim design, easy install

Max load up to 1100W

After calibration, the controller can auto feedback the roller shutter position

Overload protection

Z-Wave V6.02/6.51

Very low Electricity consumption, meet Europe year 2012 energy-related
products requirement directive 2009/125/EC no. 1275/2008

47.5 X 39 X 15.6 (mm)

LVD:EN 60669-2-1:2004+A1:2009+A12:2010,

EN 60669-2-2 :2006 EN 60669-1:1999+A1:2002+A2:2008+IS1:2009

R&TTE : EN 301489, EN 300200