Zvox Audio AV203 Setup & Operation
SETUP & OPERATION
ZVOX AccuVoice TV Speaker
Model AV203
www.zvoxaudio.com
2 ZVOX AccuVoice TV Speaker | Setup & Operation
READ THIS FIRST
Important Safety Instructions
For ZVOX Audio System
CAUTION
RISK OF ELECTRICAL SHOCK, DO NOT OPEN
Warning: To reduce the risk of electrical shock, do not
remove cover (or back) – no serviceable parts inside.
Refer servicing to qualied service personnel.
This lightning ash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage”
within the product’s enclosure that may
be of sufcient magnitude to constitute a
risk of electrical shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
THIS APPLIANCE SHALL NOT BE EXPOSED TO
DRIPPING OR SPLASHING WATER AND NO OBJECT
FILLED WITH LIQUIDS SUCH AS VASES SHALL BE
PLACED ON APPARATUS.
WARNING
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not t into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when
Important Safety Instructions
the apparatus has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15. Grounding or Polarization–This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the other). This plug
will t into the power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to
t, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
16. Ventilation–Slots and openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from overheating, and these
openings must not be blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.
17. The MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
18. CLASS II apparatus with double insulation, and no protective earth provided.
19. CAUTION: Danger of explosion if the remote control battery is incorrectly replaced.
Replace only with the same or equivalent type.
20. WARNING: The remote control battery (battery or batteries or battery pack) shall not
be exposed to excessive heat such as sunshine, re or the like.
21. No naked ame sources, such as lighted candles, should be placed on the apparatus.
Disposing of this appliance
Electric and electronic appliances often contain valuable materials.
These appliances may also contain materials essential for the
correct functioning of your appliance which, if handled or disposed
of incorrectly, could be hazardous to human health and to the
environment. Therefore, please do not dispose of this appliance
with your household waste. Dispose of it at your local community
waste or recycling center, or contact your retailer for advice.
AccuVoice TV Speaker Model AV203 Dimensions
AV203 English edition 3
Quick Setup Guide
POWER
15 V DC
INPUT
2d/2A
OUTPU T
MINI JACK
INPUT
1d
STANDARD
OPTICAL
DIGITAL
HEADPHONE
OR
SUBWOOFER
MINIJACK
OPTICAL
/ANALOG
DIGITAL
AUDIO
OUT
HDMI 1 HDMI 2
VIDEO
1 Place The ZVOX Speaker
NOTE: The ZVOX AccuVoice TV Speaker is
often referred to as the “ZVOX speaker” in
this User Manual.
You can place the speaker anywhere in
front of your TV. It can also be placed on
any level surface near the TV – above,
below or to the left or right. It doesn’t have
to be centered in front of the TV, as long as
it is facing the people watching the TV. The
speaker also has keyhole openings on the
back that allow “on wall” placement.
2 Connect Power Cord
to Speaker
Connect the power cord to the power
jack on the back of the speaker.
Then connect the AC plug into an AC
power receptacle. Don't turn it on
just yet.
3 Connect the Optical Signal Cable
Most TVs have an optical digital output jack (sometimes called
“Toslink”) on the back. Connect one end of the supplied optical cable to
this optical jack. Connect the other end of the optical cable to the
optical jack on the ZVOX AccuVoice TV speaker.
NOTE 1: The optical plug and jack are not square. Position the optical
plug so it matches the orientation of the optical jack, then push the plug
into the jack. You should hear and feel a "click" when the plug is
correctly inserted into the optical jack.
NOTE 2: If your TV does not have an optical connector, you can also
connect the ZVOX speaker using an analog signal cable (also supplied).
See instructions later in this manual.
4 Turn down your TV’s sound and
turn on the AccuVoice TV Speaker
Tune your TV to a program. Then use the TV remote to turn
down the sound from your TV all the way.
Using the ZVOX speaker remote control, press the POWER
button to turn on the ZVOX speaker. You should be able to
hear the TV sound from the ZVOX speaker. Use the volume
buttons on the ZVOX speaker’s remote control to adjust the
sound to a good level. You are done!
If you don't hear sound, press the INPUT button on the
ZVOX speaker remote to conrm it is set to the optical audio
input (InId on the display).
INPUT
SURROUND
POWER
MUTE
ACCUVOICE
VOLUM E
Back of TV
Loading...