Zvex Woolly Mammoth 7 User Manual

Type: Hand Painted [HP] Model: Woolly Mammoth 7™

Congratulations! You are the proud owner of a ZVEX Effects Woolly Mammoth 7™. The evolution of

this massive beast continues. The WM7™ packs all of the subharmonic wallop and ripping fuzz of the original
Woolly Mammoth™, with some new custom tweaks to make it even more versatile. The WM7™ is equally
awesome on bass or guitar.

CONTROLS

Expanded Tone Circuit: The WM7™ features a Marshall ™

style tone stack with Bass, Mid, and Treble controls. This is a
departure from the original Woolly with its single tone knob.
The tone stack allows for expanded tone shaping capability.
Being able to switch it in and out of the signal path makes it
a valuable tool for sculpting fuzz into dense soundscapes.
The tone stack is switched in and out of the circuit with the
footswitch on the lower left portion of the pedal. The LED next
to the switch indicates that the tone controls are active when
lit. The tone circuit does not apply to your signal when the
WM7™ is in bypass.

Pinch: Controls the pulse width of the fuzz. Turning this control
clockwise yields a progressively more clipped nasal fuzz with
increased gating action.

Wool: This controls the amount of fur on the fuzz.

PLEXIGLASS WINDOW

Because why not. There is something magical about peering
into the heart of a device, to see its inner workings. Who
hasn’t marveled at what goes on inside a watch, or an internal
combustion engine. An LED status indicator is utilitarian; a
brightly lit view into the heart of the matter is Art.

POWER SUPPLY JACK

All Z.Vex pedals use 9V DC power supply with (–) polarity on the
middle pin (typical Boss® or other 9V power supply). Using the
incorrect supply may damage your pedal. Your WM7™ may also
be powered by a 9V battery.

WARRANTY & SERVICE

Your hand-painted Woolly Mammoth 7™ has a lifetime warranty
(Zack’s lifetime). For hand-painted Z.Vex Effects warranty info
and for any repair questions, consult http://zvex.com/repairs for
more information.

Enjoy!

Tone Bypassed: This feature allows you to bypass the tone
circuit completely. The WM7™ fuzz without EQ has its own
unique voice, much different from the sound of a WM7™ with
tone stack, or the single tone knob of the standard Woolly
Mammoth™. The fuzz is more linear, with pronounced mid
frequencies.

Independent Volume Controls: VOL 1 is tied to the WM7™ with
the tone stack ON. VOL 2 is volume for the WM7™ with the tone
stack OFF. The benefits of this feature are varied. Independent
volume controls can be used to match apparent volumes of
EQ and non-EQ tones, or to accentuate one side for dramatic
effect.

P.O. Box 16078 | Minneapolis, MN 55416

www.zvex.com | [e-mail] | [e-mail]

Last Updated: June 2015