Zuiver ZIVE1073 Installation & Assembly [de, en]

Page 1
ASSEMBLY & USER INSTRUCTIONS DRAGON SOFA
Take off the plastic and carton, or just take out the legs
back: 3 cm front: 3,5 cm
Fold away the cover. Put the leg next to the velcro border, starting at the back of the sofa. Distance to the back ca. 3 cm, to the front ca. 3,5 cm.
No screw here
Use 4 screws for each mounting
plate to x the legs to the sofa.
No screw needed in the most inner position (red cross in the picture)
Turn the sofa around. When you already have removed the plastic and carton, put something on the oor to
prevent the sofa from getting dirty or damaged. Otherwise, open up the carton and plastic at the bottom.
Fold back the cover, on to the velcro.
Turn the sofa on its feet. Take off the plastic and carton. Put the back and arm cushions in the right position. Now enjoy your Dragon sofa!
Page 2
ASSEMBLY & USER INSTRUCTIONS DRAGON SOFA
In normal use, wrinkles will show on the seat of the sofa. This can easily be xed. Push the fabric in the space
between back and seat. There is a plastic tube in there, which helps to keep the cover in place.
Do not wash
Suitable for dry-cleaning
Do not bleach
Iron at low temperature, max. 110 ℃
Page 3
MONTAGEANLEITUNG & PFLEGE DRAGON SOFA
Entfernen Sie die Verpackung (Karton & Plastikfolie)
hinten: 3 cm vorne: 3,5 cm
Falten Sie den Bezug etwas zurück (Klettverschluss). Halten Sie das Bein an die Kante neben dem Klettverschluss. (Abstand vorne: ca. 3,5 cm, hinten ca. 3 cm)
Entfernen Sie die Plastikfolie von den Füßen.
Keine Schraube hier
Nehmen Sie 4 Schrauben pro Beschlag. (Sie benötigen keine Schraube an der mit einem roten Kreuz markierten Stelle)
Drehen Sie das Sofa auf den Kopf das der Boden nach oben zeigt (Falls Sie bereits die Verpackung ent­fernt haben: Legen Sie etwas unter um Verschmutzungen und Beschädigungen zu vermeiden)
Falten Sie den Bezug wieder zurück auf dem Klettverschluss.
Drehen Sie das Sofa nun und stellen es auf seine Füße. Entfernen Sie die restliche Verpackung und bringen die Rückenlehne und
die Armauagen in die korrekte Position. Nun ist es an der Zeit Ihr
neues DRAGON Sofa zu genießen!
Page 4
MONTAGEANLEITUNG & PFLEGE DRAGON SOFA
Bei normaler Benutzung des Sofas bilden sich Falten. Diesem können Sie entgegenwirken indem Sie den Bezug
zwischen Rückenlehne und Sitzäche schieben. Hier ist ein Plastikschlauch eingesetzt der den Bezug in Form hält.
Nicht waschen
Professionelle Trockenreinigung, normaler Prozess
Nicht Bleichen
Bügeln mit einer Höchsttemperatur der Bügeleisensohle von 110 ℃
Loading...