Zuiver ZIVE1034 Installation & Assembly

Page 1
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary tools
Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the retailer from whom you bought this product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 10 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Read this leaflet in full before commencing assembly.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
1 51/11
Page 2
Fittings and parts checklist
A Table top x 1
B Legs x 4
Step by step assembly instructions
Step One
B
B
B
B
A
2 51/11
Page 3
Step by step assembly instructions
Step Two
Step Three
With 2 people, carefully turn around the table, make sure 4 legs put on ground same time. Pls do not drag the table on floor.
3 51/11
Page 4
Care and Maintenance
Wood furniture
Wood displays different grain patterns depending on which way they cut - for example, the
•
‘medullary ray’ which can appear is a mark of good quality timber - these are just characteristics of the natural beauty of the wood. Some furniture is also deliberately aged and rustic.
Wood veneers also allow distinctive patterns to be created on flat surfaces, such as table tops
•
and drawer fronts by the way the slivers are arranged.
•
All timber surfaces will change colour and mellow over time. New furniture will initially vary in shade from items that have been previously purchased.
How to care for your wood furniture
• Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
•
Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface by building up over time.
•
Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills immediately and ensure that a mat or pad is placed under paper if you are writing.
•
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture
next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by central heating can cause damage such as warping.
Safety instructions
• Never drag furniture when moving it, always lift it.
•
Periodically check all fixings to ensure none have come loose and re-tighten where necessar
•
Please take care when handling or moving the furniture, careless handling may cause damage
or injury.
•
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a competent
person. No liability will be accepted for damage or injury caused by incorrectly installed or
assembled furniture.
•
It is recommended that before moving heavy objects to a new location they are completely dis­assembled to avoid personal injury or damage to the furniture. Please be careful to retain all Fittings when doing this.
y.
4 51/11
Loading...