ZTX WIRELESS ZTX965D User Manual

Mounting the ZTX965D

ZTX965D Battery Replacement

8886 N. Government Way

Hayden, ID 83835

Phone: [phone]

Fax: [phone]

www.ztxwireless.com

ZTX965D

Multi Input 900 MHz Universal Transmitter

The ZTX965D offers the diversity of three
independent contact closure alarm inputs, one
independent analog input to monitor an
external battery and one set of internal contact
magnetic reed switches. All alarm inputs are
de-bounced and are interrupt driven so the
change of state is recognized in microseconds
then verified for a few milliseconds which
initiates the alarm or restore transmitted
information.

The ZTX965D is capable of being supervised
by the system, the period between and the
number of transmits per supervisory check-in
is programmable, 1 to 65,535 seconds and
times to transmit from 1 to 255. Default values
are 300 seconds and 2 supervisory transmits.

Mount the bracket to a wall, door jam or a window
casing using two each # 6 flathead wood or sheet
metal screws. Engage the enclosure bottom with
slide latches and slide the enclosure onto the
bracket until it latches. To remove the enclosure,
remove the cover and remove the battery. Use a
small screw driver to push and release the latch,
under the battery, and slide the enclosure bottom
off of the bracket.

To replace the battery, remove the cover,
remove the battery and replace with a new
battery, observing the polarity labeled under
the battery. Push the reset button and
reinstall the cover.

ZTX965D Programming

The transmitter is factory programmed with
default values and the IDs are sequentially
programmed when the unit passes final test.
For custom programming contact the factory.
The programmed firmware resides in non­volatile flash memory. The loss of power will
not cause the loss of program.

Reed switch top and side

The ZTX965D internal battery is constantly
monitored by the microprocessor and a low
battery condition is the result of during a
transmission or any event the battery level
reaches a predetermined threshold. This
threshold has been established to allow the
battery to fully support the transmitter for as
long as two weeks under normal operation.
When the Low Battery Condition has been
detected, the transmitter transmits a Low
Battery Alarm and the Low Battery Status is
latched. The Low Battery Status is transmitted
with supervisory and alarm events

.

Specifications

Contacts external / internal

Max lead length for external contacts

Operating Temperature

Typical reed switch engage / release

Typical Battery life

ZTX965D User Manual Doc 100-00130-20 Rev 1 3-31-08

Dimensions

Weight

Battery type

NO / NC
12 feet

3.535” x 1.709” x 1.04”

2.5 oz (71gm)
32° to 140° F (0° to 60°C)
.6” / .8”

3.0 V Lithium CR123A
4 years

Input connector J2

Pin 1 = Ground
Pin 2 = Alarm 1
Pin 3 = Alarm 2
Pin 4 = Alarm 3

Pin 5 = External Battery

Internal Reed 1 at top and 1 at right center

Warranty & Disclaimer

ZTX Wireless, Inc. (“ZTX Wireless”) warrants its products (“Product” or “Products”) to conform to its own specifications and to be free of defects in materials and workmanship under normal
use for a period of twelve (12) months from the date of manufacture. Within the warranty period ZTX Wireless will repair or replace, at its option, all or any part of the warranted products.
ZTX Wireless will not be responsible for dismantling and/or reinstallation charges. To exercise the warranty, the User (“User”, “Installer” or “Consumer” must be given a Return Material
Authorization (“RMA”) Number by ZTX Wireless. Details of shipment will be arranged at that time.

This warranty does not apply in cases of improper installation, misuse, failure to follow installation and operating instructions, alteration, abuse, accident or tampering, and repair by anyone
other than ZTX Wireless.

This warranty is exclusive and expressly in lieu of all other warranties, obligations or liabilities, whether written, oral, express, or implied, including any warranty of merchantability or fitness
for a particular purpose. ZTX Wireless will not be liable to anyone for any consequentia l or incidental damages for breach of this warranty or any other warranties.

This warranty shall not be modified, varied or extended. ZTX Wireless does not authorize any person to act on its behalf to modify, vary or extend this warranty. This warranty will apply to
ZTX Wireless products only. All other products, accessories or attachments used in conjunctio n with ZTX Wireless equipment, including batteries, will be covered solely by their own
warranty, if any. ZTX Wireless will not be liable for any direct, incidental or consequential damage or loss whatsoever, caused by the malfunction of Products due to products, accessories,
or attachments of other manufacturers, including batteries, used in conjunction with ZTX Wireless Products. This warranty does not warrant the replacement of batteries that are used to
power ZTX Wireless Products.

The User recognized that properly installed and maintained emergency call system may only reduce the risk of events such as personal injury, robbery, burglary or fire. It does not insure
or guarantee that there will be no death, personal damage and/or damage to property as a result. ZTX Wireless does not claim that the Product may not be compromised and/or
circumvented, or that the Product will prevent any death, personal and/or bodily injury and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the Product will
in all cases provide adequate warning or protection.

ZTX Wireless shall have no liability for any death, injur y or damage, however incurred, based on a claim that ZTX Wireless Products failed to function. However, if ZTX Wireless is held
liable, directly or indirectly, for any loss or damage arising under this limited warranty or otherwise, regardless of cause or origin, ZTX Wireless’ maxim um lia bility will not in any case
exceed the purchase price of the Product, which will be fixed as liquidated damages and not as a penalty, and will be the complete and exclusiv e remedy against ZTX Wireless.

►Warning: The User should follow all installation, operation and maintenance instructions. The User is strongly adv ised to conduct Product and systems tests at least once each week.
Changes in environmental conditions, electric or electronic disruptions and tampering, may cause the Product to not perform as expected.

►Warning: ZTX Wireless warrants its Product to the User. The User is responsible for exercising all due prudence and taking necessary precautions for the safety a nd protection of lives
and property wherever ZTX Wireless products are installed.

►Warning: The Manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the

user’s authority to operate this equipment.

ZTX965D User Manual Doc 100-00130-20 Rev 1 3-31-08