ZTE H560N User guide

Package Contents: H560N Wireless Router, Quick Start Guide, Warranty Card

Button/Switch

Direction

WPS (Wi-Fi
Protected
Setup)

Users can easily push the WPS button for quick and safe WLAN configuration
with other WLAN devices.
Reset

Users can reset ZXHN H560N by pressing this button.

USB

It can provide electrical current to charge your mobile device (Max 1A)

AP/Extender

AP: Access Point (see figure 1-1, AP mode and router mode)
Ext: Extender (see figure 1-1, Extender mode 1 and 2)

1 Buttons and switch

ZXHN H560N buttons show as follow.

2 Connecting the Equipment

Figure 1-1 Connecting the Equipment

- 1 -

After connecting the H560N, please check the indicators. The description is in Part 3.

Color

Description

RED

ON: The device is booting or hardware error.

Flashing: In Extender mode, H560N is not connected to any other
wireless router.

GREEN

ON: Device runs normally, no wireless data transmitted.

Random Flashing: Data is being transmitted.

5Hz Flashing: In WPS mode.

3 LED indicator

ZXHN H560N uses a 2-color LED, red and green, to indicate the status as follow.

4 Connect as Extender mode

1. Switch AP/Extender slid to Extender.

- 2 -