ZoweeTek ZW-H6 User Manual

About Speaker Charging:

MIC

TF

DC 5V

USB

A. When working, the battery icon on the screen flash continuously,
indicating that the battery is low,please charge it in time. Please use
the standard adapter.Please unplug the adapter timely after
fully charged the charging time is normally 4-5 hours.When
charging, the screen battery icon will flash continuously. When

fully charged, the battery icon will stop flashing and remain in
the long light state.
B. In order to achieve the best effect when using the speaker for
the first time, it is recommended to be fully charged before use.

C. Please use the standard 5V 2A charger to charge the device.

UHF Wireless Microphone:

Pairing key

Head bracket

Zoweetek Guarantee:

100% Zoweetek Guaranteed Product Satisfaction.
We provide operation guidance and render a 1 year warranty.
If you have any questions, please feel free to contact us.
We will try our best to provide you the best service.
Official website: www.zoweetek.cn
Email:[e-mail]

Shenzhen Zoweetek Electronics Limited www.zoweetek.cn Shenzhen Zoweetek Electronics Limited www.zoweetek.cn Shenzhen Zoweetek Electronics Limited www.zoweetek.cn Shenzhen Zoweetek Electronics Limited www.zoweetek.cn Shenzhen Zoweetek Electronics Limited www.zoweetek.cn

volume -

battery
charging sign

volume +

DC 5V

Power switch

ON/OFF

soft rubber circle

head-mounted design

Detachable

head-mounted rack

Microphone head

UHF Wireless Microphone Operation:

Step 1: Turn on the speaker, fast and short press “ M ” 3 times

to enter into UHF wireless pairing status with voice prompt
“ UHF is waiting for connection ”.
Step 2: Switch on the UHF wireless MIC and long press “ ” for 5s,
pairing is successful with voice prompt “UHF is connected ”.
Then you can amplify voice with wireless MIC.

Note: During the use of wireless microphone,short press “+ ” to
increase the microphone volume and short press “ - ” to
reduce the microphone volume.Long press “ ” to disconnect
wireless microphone with voice prompt “UHF is disconnected ”,
repeat step 1 and step 2 to pair wireless microphone manually.

About UHF Wireless Microphone Charging:

When the blue light blinks, it means the battery in the headset is low,
Please push the switch to “ OFF ” state to close the microphone,
connect one end of Micro USB connector to the DC 5V interface of
the microphone, and connect the other end to the charger to the
power socket. When charging, the red light will on all the time; it
will go out when the battery is fully charged. Unplug the charger as
soon as it is charged.

Wireless Microphone Technical Parameters:

Frequency response:

Sensitivity:

Working time:

30Hz-23KHz

-41dB±1dB

（0dB=1V/Pa）

3-5hours

Output resistance:

Recharging voltage:

Charging time:

≤2.2KΩ

DC 5V 500mA+

2-3 hours

Caution And Trouble Shooting:

1). Aim at the MIC capsule when speaking and keep the distance
between voice amplifier and MIC longer than 60cm avoid howling.

2). No sound out from the speaker after the UHF Mic is paired. The
connection between Mic and speaker may be lost. You should
re-pair it as mentioned in the previous paragraph.

3). Don’t insert or plug the connector frequently to avoid the looseness
of socket or the bad connect.

4). Recharge timely when battery power is low.

5). Original accessories are suggested if they need to be replaced.

6). Non-professional technician is not allowed to dismantle or repair
the product, please contact the local agent if there is any question
or service requirement.

7).The amplifier should be kept in dry and ventilated area, rain,water,
thump should be avoided.

8).Please keep the product and accessories far away from children.

9).This product needs to user the power adapter (DC 5V, 2A) to
charge. After charged, please remember to unplug the power cord
or power socket. We suggest stop other operations under the
charging mode. Please cut off the power supply first if you need
to use it.

10).If you don’t need to use it, please switch off the speaker to avoid
the loss of power.

Solve some normal problems by yourself:

Please recharge it to
switch on.

Please use another better
audio files.

Please adjust the volume
properly.

Please turn down the
volume.

Please contact us for
maintenance.

Please insert the MIC.

Please turn on the
MIC properly.

Please turn on the MIC
volume.

Please pair the UHF wireless
microphone again.Please
recharge wireless MIC.

Please turn the format to
MP3.

Please restart the speaker.

Please insert the USB/TF
card properly.

Please check whether the
distance beyond the effective
range of 33 ft.
Clear any barriers between
your device and speaker.

Switch on the
speaker but no
sound

With sound
distortion

No sound with
Karaoke

No sound with
MP3 playing

The music is
staccato when
playing

1. Main machine is running
out of battery

2.No audio input

3.Haven’t turned on the
volume

1.The volume is too high

2.The speaker is broken

1.Haven’t inserted the wired
MIC properly

2.Haven’t switched on the
MIC

3.Haven’t turned on the
MIC volume

4.The UHF wireless is
disconnected or wireless
MIC is low battery

1.The audio’s format in USB
flash drive or TF card is wrong

2.Chaotic procedure with
wrong

3.Haven’t inserted the USB
flash drive/TF card properly

May exceed the distance
range or too many obstacles

ZOWEETEK ORIGINAL SOUND

Voice Amplifier

ZW-H6

USER MANUAL

ZW-H6 UHF Wireless Portable PA System Loud Speaker with
Headset. ZW-H6 UHF is a highly integrated system with many
features. It is a public address system that amplifies your voice
with HD sound quality.You can use a wired microphone or one
wireless headset microphone to talk into it. It is a Music Player. You
can play music from a TF card or USB flash disk. Support FM
and REC functions.It's not just a voice amplifier, it's also a portable
bluetooth speaker.

Please read the instructions carefully before using it.

Features:

1. ZOWEETEK patented appearance;

2. Bluetooth 5.0 which can support sync music play and wireless
karaoke.Bluetooth connection distance is up to 33 ft;

3. Supports TWS wireless Bluetooth connection;

4. Supports FM and REC functions;

5. UHF Wireless through-wall technology, high sensitivity Moving­ Coil microphone, stable signal and clear sound;

6. Super MP3 audio encoding technology --- support TF card & USB
flash disk and 3.5mm AUX audio input;

7. Output power 25W with 4 inch Bass Speaker and 1.5 inch Treble
Speaker, sound coverage up to 2000m2;

8. Built in 2*2000 mAh lithium battery. Built in intelligent power
manage ment module;

9. Power double magnetic trumpet --- more clear and penetrating;

10. Adopt ZOWEETEK Acoustic amplification electroacoustic
system;

11. Equipped with ZOWEETEK special acoustic microphone --- Loud
and clear orginal sound amplification.

Shenzhen Zoweetek Electronics Limited www.zoweetek.cn

Specifications:

Output power: 25W

Output Impedance: 4Ω

Charging voltage: DC 5V 2A

Charging time:

Sensitivity:

Support TF card:

4-5 hours

550 ± 30mV

≤32G

Frequency response:

Work temperature:

Amplify time:

Music-play time:

S/N ratio:

Battery:

80Hz-18KHz

-10°C - 45°C

8-10 hours

3-7 hours

≥70db

2*2000mAh

Function illustration:

1

①

Power/Volume: Rotate the knob to “on ” till the display light up
to turn on the speaker.During start-up status,rotate the knob
clockwise to “+ ” to continuously increase the volume;rotate the
knob to “ - ” to decrease the volume.Rotate the knob to“ off ” to turn
off the device.

2

② Digital display screen: Support FM radio frequency display,

music play time display.

6

3

4

8

7

5

10

MIC VOL

9

USB

MIC

DC 5V

TF

13

12

11

③ Mode selection: Short press“ M ” to select TF card mode/USB

flash drive mode/Bluetooth mode/FM mode/UHF mode.

④ One Key Bluetooth
⑤ REC Function:

⑴.Connected with wireless or wired microphone, in any mode,
long press “ ● ”when the time on the screen began to beat
to enter into REC mode to record with inserting storage
USB flash drive or TF card (maximum 32GB).After recording,
short press “ ● ” again to stop recording and savethe audio
files and start to play the recordings.

⑵.In music mode,short press “ ● ” to enter into recordings play

mode with inserting storage (which have recordings). It will
play thelast recording by default and please press “ ” or
“ ” button to select the previous and next recordings.

⑥ Play/Pause:

a. In music play mode, short press it to pause; short press it
again to play ;
b. In any mode,double press the “ ” button to close the voice
prompt of the speaker , and double press the “ ” button
again to turn on the voice prompt of the speaker.

⑦ Next: Short press “ ” to select next audio file.Long press to

fast forward.

⑧ Previous: Short press “ ” to select previous audio file. Long

press to fast rewinding.

⑨ MIC volume: Rotate the knob clockwise to “ + ” to continuously

increase the volume;rotate the knob to “ - ” to decrease the
volume.

⑩ USB port: Support USB flash drive play,with a voice prompt

“USB flash driver playing ”.Maximum support 32GB USB flash
drive with MP3 /WAV /WMA format.

⑪ TF card slot: Support TF card play,with a voice prompt “ TF

card playing ”.Maximum support 32GB TF card with MP3 /WAV
/WMA format.

⑫ MIC jack: Insert the wired microphone with Ø3.5mm plug .
⑬ DC 5V: Please use the DC 5V=2A power adapter to charge the

speaker.

TF card/USB flash drive function instruction:

After inserted the TF card /USB flash drive into the slot of TF card
/USB flash drive according to the direction of the speaker
identification, the speaker will automatically play the music file of
TF card /USB flash drive, and the previous song and the next song
can be selectedby pressing the “ ” or “ ” button.

MIC VOL

USB

MIC

DC 5V

TF

Bluetooth Function:

Step1. Switch on the speaker and press “ ” to enter into Bluetooth

mode. (The Bluetooth mode is ready with voice prompt
“ Bluetooth is waiting for connection ” and “ ” on the screen
keep flashing).
Step2. Turn on the Bluetooth function of your mobile phone and
search “ ZW-H6 ”. Click and it will be connected successfully
with a voice prompt “ Bluetooth is connected ”.

Step3. After successful connection, it can play the audio files.

True Wireless Stereo Function

Step1: Switch on two speakers and both press “ ” to enter into

Bluetooth mode.Long press“ M ”of one speaker to enter into
pairing status,when Bluetooth icon of another speaker stop
flashing,which means this two speaker connected successfully.
Step2: Turn on the Bluetooth function of your deviceand search
“ H6 ”.Click and it will be pair successfully.Two devices
will play simultaneously.

Step3: Long press “ M ”of one speaker to exit this function.

FM Function:

Switch on the speaker, short press “ M ” to choose the FM mode with
the screen showing radio frequency; Long press “ ” to enter into
automatic channels searching,after searched successfully, the device
will save the channel automatically. Please press “ ” or “ ” to
choose the saved channels.

FM

Shenzhen Zoweetek Electronics Limited www.zoweetek.cnShenzhen Zoweetek Electronics Limited www.zoweetek.cnShenzhen Zoweetek Electronics Limited www.zoweetek.cnShenzhen Zoweetek Electronics Limited www.zoweetek.cnShenzhen Zoweetek Electronics Limited www.zoweetek.cn