Zotac ZBOX HD-ND02 User Manual
1
ZOTAC ZBOX
ZOTAC ZBOX
User’s Manual
No part of this manual, including the products and software described in it,
may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language in any form or by any means,except documentation kept by the purchaser for backup purposes, without the express written
permission of ZOTAC.
Products and corporate names mentioned in this manual may not be registered trademarks or copyrights of their respective companies, and are
used for identication purposes only. All trademarks are the property of their
respective owners.
Every effort has been made to ensure that the contents of this manual are correct and up to date. However, the manufacturer makes no guarantee regarding the accuracy of its contents, and reserves the right to make changes
without prior notice.
2
ZOTAC ZBOX
Table of Contents
Product Specications -------------------------------------------------------------------------- 3
Safety information -------------------------------------------------------------------------------- 4
Setting up your system ----------------------------------------------------------------------- 4
Care during use -------------------------------------------------------------------------------- 4
Welcome --------------------------------------------------------------------------------------------- 5
Package contents ------------------------------------------------------------------------------ 5
Getting to know your ZOTAC ZBOX -------------------------------------------------------- 6
Front view ---------------------------------------------------------------------------------------- 6
Rear view----------------------------------------------------------------------------------------- 7
Installing Hardware inside ZOTAC ZBOX ------------------------------------------------- 8
Installing a memory module ----------------------------------------------------------------- 8
Removing the memory module ------------------------------------------------------------- 9
Installing and removing a hard disk ------------------------------------------------------- 10
Installing a hard disk (for HDD Bracket 1) ------------------------------------------- 10
Installing a hard disk (for HDD Bracket 2) ------------------------------------------- 11
Removing a hard disk (for HDD Bracket 1) ----------------------------------------- 12
Removing a hard disk (for HDD Bracket 2) ----------------------------------------- 13
Positioning your ZOTAC ZBOX --------------------------------------------------------------- 14
Installing the stand ----------------------------------------------------------------------------- 14
Installing your ZOTAC ZBOX to a monitor ----------------------------------------------- 14
Setting up your ZOTAC ZBOX ---------------------------------------------------------------- 15
Installing drivers and software --------------------------------------------------------------- 16
Installing an operating system -------------------------------------------------------------- 16
Installing system drivers ---------------------------------------------------------------------- 16
Using your ZOTAC ZBOX ----------------------------------------------------------------------- 17
Conguring wireless connection ----------------------------------------------------------- 17
Conguring wired connection --------------------------------------------------------------- 17
Using a static IP ---------------------------------------------------------------------------- 17
Using a dynamic IP (PPPoE connection) -------------------------------------------- 18
Conguring audio output via an HDMI device ------------------------------------------ 18
3
ZOTAC ZBOX
Product Specications
q Chipset
v NVIDIA® MCP7A-ION Series
q Product Size
v 188mm x 188mm x 44mm
q Microprocessor support
v Intel® ATOMTM 230/330 CPU (533 MHz FSB)
q Operating systems:
v Supports Windows XP 32 bit/64 bit, Windows Vista 32 bit/64 bit and Windows
7 32bit/64bit
q System Memory support
System Memory support (for DDR2 version only)
v Supports dual-channel DDRII 800/667 SDRAM
v Supports two SO-DIMMs
v Maximum memory size: 4 GB
System Memory support (for DDR3 version only)
v Supports dual-channel DDRIII 1066 SDRAM
v Supports two SO-DIMMs
v Maximum memory size: 4 GB
q USB 2.0 Ports
v Supports hot plug and play
v Six USB 2.0 ports (two front panel ports, four rear panel ports)
v Supports USB 2.0 protocol up to 480 Mbps transmission rate
q Onboard Serial ATA
v Independent DMA operation on one port
v Data transfer rates of 3 Gb/s.
v Support one ESATA port.
q On board Gigabit LAN
v Supports 10/100/1000 Mbps operation
q Onboard Audio
v 2-channel High-Denition audio
v Supports Jack-Sensing function
q Green Function
v Supports ACPI (Advanced Conguration and Power Interface)
q Onboard Graphics support
v Integrated 300 MHz DAC for analog displays with resolutions up to 1920x1440
at 75Hz.
v Integrated GeForce 9xxx Series GPU with DX10 support
v VGA/DVI (optional) and HDMI dual output
4
ZOTAC ZBOX
Safety information
Your ZOTAC ZBOX is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read
the following safety instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system
alone without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings.
Make sure you leave plenty of space around the system for ventilation. Never insert
objects of any kind into the ventilation openings.
Use this product in environments with ambient temperatures between 0℃ and 35℃.
If you use an extension cord, please use the UL listed cord and make sure that
the total ampere rating of the devices plugged into the extension cord does not
exceed its ampere rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still ows. Always
unplug all power, modem, and network cables from the power outlets before cleaning
the system.
If you encounter the following technical problems with the product, unplug the power
cord and contact a qualied service technician or your retailer.
¾ The power cord or plug is damaged.
¾ Liquid has been spilled into the system.
¾ The system does not function properly even if you follow the operating instructions.
¾ The system was dropped or the cabinet is damaged.
¾ The system performance changes.
5
ZOTAC ZBOX
Welcome
Congratulations on your purchase of the ZOTAC ZBOX. The following illustration displays
the package contents of your new ZOTAC ZBOX. If any of the below items is damaged or
missed, contact your retailer.
Package contents
• 1 x ZOTAC ZBOX
• 1 x Stand
• 1 x VESA mount
• 1 x AC Adapter
• 1 x Power Cord
• 1 x Warranty Card
• 1 x User’s Manual
• 1 x Support CD
6
ZOTAC ZBOX
Getting to konw your ZOTAC ZBOX
Front view
1 2 3 4 5 6 7
Refer to the diagram below to identify the components on this side of the system
1. Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect the system’s audio out
signal to amplied speakers or headphones.
2. Microphone jack
The microphone jack is designed to connect the microphone used for video conferencing, voice narrations or simple audio recordings.
3. Memory card slot
The built-in memory card reader reads MMC/SD/SDHC/MS/MS Pro/XD cards used
in devices like digital cameras, MP3 players, mobile phones and PDAs.
4. USB port
The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras and hard disk drives. USB allows many devices
to run simultaneously on a single computer, with some peripheral acting as additional plug-in sites or hubs.
5. WiFi LED
The WiFi LED blinks when data is being transfered over WiFi.
6. Hard disk LED
The hard disk LED blinks when data is being written into or read from the hard disk
drive.
7. Power switch
The power switch allows powering ON and OFF the system
Loading...