Zotac CI523nano, CI543nano User Manual
ZOTAC ZBOX nano
1
ZOTAC ZBOX nano
User’s Manual
No part of this manual, including the products and software described in it, may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means, except documentation kept by the
purchaser for backup purposes, without the express written permission of ZOTAC.
Products and corporate names mentioned in this manual may not be registered
trademarks or copyrights of their respective companies, and are used for identication
purposes only. All trademarks are the property of their respective owners.
Every effort has been made to ensure that the contents of this manual are correct and
up to date. However, the manufacturer makes no guarantee regarding the accuracy of
its contents, and reserves the right to make changes without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.
ZOTAC ZBOX nano
2
Table of Contents
Product specications ----------------------------------------------------------------------------------------3
Safety information ----------------------------------------------------------------------------------------------4
Setting up your system ------------------------------------------------------------------------------------- 4
Care during use ---------------------------------------------------------------------------------------------- 4
Welcome -----------------------------------------------------------------------------------------------------------5
Package contents -------------------------------------------------------------------------------------------5
Getting to know your ZOTAC ZBOX nano --------------------------------------------------------------6
Front view -----------------------------------------------------------------------------------------------------6
Rear view ------------------------------------------------------------------------------------------------------ 7
Customizing the ZOTAC ZBOX nano ---------------------------------------------------------------------8
Installing a memory module -------------------------------------------------------------------------------9
Removing the memory module --------------------------------------------------------------------------10
Installing a hard disk drive --------------------------------------------------------------------------------11
Setting up your ZOTAC ZBOX nano ----------------------------------------------------------------------15
Positioning the ZOTAC ZBOX nano ----------------------------------------------------------------------- 17
Mounting the ZOTAC ZBOX nano to an LCD monitor ---------------------------------------------17
Installing drivers and software -----------------------------------------------------------------------------19
Installing an operating system ----------------------------------------------------------------------------19
Installing system drivers -----------------------------------------------------------------------------------19
Using your ZOTAC ZBOX nano ----------------------------------------------------------------------------- 20
Conguring a wireless connection ----------------------------------------------------------------------20
Conguring a wired connection --------------------------------------------------------------------------21
Using a static IP -----------------------------------------------------------------------------------------21
Using a dynamic IP (PPPoE connection) ---------------------------------------------------------21
Conguring audio output -----------------------------------------------------------------------------------22
ZOTAC ZBOX nano
3
Product specications
Processor
• Intel Core i3-6100U (dual core, 2.3 GHz) for ZBOX-CI523NANO series
• Intel Core i5-6200U (dual core 2.3 GHz, up to 2.8 GHz) for ZBOX-CI543NANO series
Onboard graphics
• Intel HD Graphics 520
• Intel Quick Sync Video
• HDMI 1.4a (max resolution: 4096x2160 @24Hz)
• DP 1.2 (max resolution: 3840X2160 @60Hz)
Memory support
• 2 DDR3L-1600 SODIMM slots
• Up to 16 GB of memory
USB ports
• 2 USB 3.0 ports
• 2 USB 3.1 Type-C ports
• 2 USB 2.0 ports
Storage support
• SATA 6.0 Gb/s transfer rates
• Supports one 2.5-inch SATA HDD/SSD (9.5mm max height)
Network support
• Single Gigabit (10/100/1000Mbps) LAN
• IEEE 802.3 compatible
Wi-Fi support
• 802.11ac Wi-Fi (dual-band)
• Bluetooth 4.0
Audio
• Digital 8 Channel Audio (LPCM/bitstream via HDMI)
Operating System support
• Windows 8.1 32bit/64bit, Windows 10 32bit/64bit ready
Product Dimensions
• 146.4mm x 126.5mm x 60.5mm
ZOTAC ZBOX nano
4
Safety information
Your ZOTAC ZBOX nano is designed and tested to meet the latest standards of safety for information
technology equipment. However, to ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system alone
without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure
you leave plenty of space around the system for ventilation. Never insert objects of any kind into
the ventilation openings.
Use this product in environments with ambient temperatures between 0℃ and 35℃.
If you use an extension cord, please use the UL listed cord and make sure that the total
ampere rating of the devices plugged into the extension cord does not exceed its ampere
rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still ows. Always unplug all
power, modem, and network cables from the power outlets before cleaning the system.
If you encounter the following technical problems with the product, unplug the power cord and
contact a qualied service technician or your retailer.
¾ The power cord or plug is damaged.
¾ Liquid has been spilled into the system.
¾ The system does not function properly even if you follow the operating instructions.
¾ The system was dropped or the cabinet is damaged.
¾ The system performance changes.
ZOTAC ZBOX nano
5
Welcome
Congratulations on your purchase of the ZOTAC ZBOX nano. The following illustration displays the
package contents of your new ZOTAC ZBOX nano. If any of the below items is damaged or missing,
contact your retailer.
Package contents
• 1 x ZOTAC ZBOX nano
• 2 x VESA mount bracket
• 1 x AC Adapter
• 1 x Power Cord
• 1 x Antenna
• 1 x Support DVD
• 1 x USB ash drive with OS drivers
• 1 x User Manual & Quick Start Guide
• 1 x Warranty Card
ZOTAC ZBOX nano
6
Getting to know your ZOTAC ZBOX nano
Front view
Refer to the diagram below to identify the components on the front of the ZBOX nano
1. Power button
The power button turns the system ON and OFF.
2. Power LED
The Power LED is always ON when power is on.
3. SATA status LED
The SATA LED blinks when data is being written onto or read from the SATA.
4. WiFi LED
The WiFi LED is always ON when WiFi is activated.
5. Memory card reader
The built-in memory card reader reads SD/SDHC/SDXC cards used in devices such as digital
cameras, MP3 players, mobile phones and PDAs.
6. Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect the system’s audio out signal to
amplied speakers or headphones.
7. Microphone jack
The microphone jack is designed to connect a microphone for video conferencing, voice
narrations or simple audio recordings.
8. USB 3.1 Type-C ports
The type-C USB 3.1 port supports the SuperSpeed USB 3.1 devices and is backwards
compatible with USB 3.0/2.0/1.1 devices. Use this port for USB 3.1 devices for maximum
performance with USB 3.1 compatible devices.
9. USB 3.0 port
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards compatible
with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for maximum performance with
USB 3.0 compatible devices.
1
2 3 4
5
6 7
8
9
ZOTAC ZBOX nano
7
Rear view
Refer to the diagram below to identify the components on the back of the system.
1. WiFi antenna connector
The WiFi antenna connector supports the included WiFi antenna.
2. USB 2.0 ports
The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mice,
cameras and hard disk drives.
3. Ethernet port
The eight-pin RJ-45 LAN port supports standard Ethernet cable for connections to local area
networks (LAN) with speeds of 10/100/1000Mbps.
4. USB 3.0 port
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards compatible
with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for maximum performance with
USB 3.0 compatible devices.
5. DisplayPort
DisplayPort supports both external (box-to-box) and internal (laptop LCD panel) display
connections.
6. HDMI port
The HDMI (High Denition Multimedia Interface) port supports a UHD device such as an LCD
TV or monitor to allow viewing on a larger external display.
7. Power input (DC19V)
The supplied power adapter converts AC power to DC power for use with this jack. Power
supplied through this jack supplies power to the PC. To prevent damage to the PC, always
use the supplied power adapter.
The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.
1
2
3
4
5
6
7
Loading...