Zoo Med Repti Fogger User Manual

INSTRUCTIONS

TERRARIUM HUMIDIFIER

Congratulations on your purchase of Zoo Med’s REPTI FOGGER™ Terrarium Humidifier. The following instructions will assist you with
the proper assembly and operation of this unit. Please read the following instructions carefully. If you have any questions regarding
these instructions or the proper use of this item, please contact our customer service department at [e-mail] or by
calling [phone] (US and Canada only). Customers in other countries, please call [phone].

ITEM# RF-10

FEATURES:

• Compact ULTRASONIC HUMIDIFYING FOGGER with adjustable fog output control.

• READY TO OPERATE! Includes one liter bottle and all necessary fittings.

• EASY TO FILL: Bottle screws onto “no-spill” valve for easy removal and refilling.

• Automatic shut-off feature turns fogger off when water runs out.

• Use with Zoo Med’s HYGROTHERM™ Humidity and Temperature Controller for precise humidity and temperature control.

SAFETY INSTRUCTIONS:

IMPORTANT: In order to reduce the risk of fire or electric shock, read and save these instructions prior to operation.

• DO NOT operate the unit near electrical devices or other objects that can be damaged by high humidity.

• DO NOT expose the power cord or plug to water.

• DO NOT remove the hose nozzle or fog output attachment from the fogger base. DO NOT insert fingers or other items into the output
nozzle as injury could occur.

• DO NOT touch the transducer (silver disk located beneath the fog output nozzle).

• DO NOT immerse the REPTI FOGGER™ base assembly in water.

• DO NOT allow heavy objects to rest on any of the REPTI FOGGER™ components or on the power cord.

• DO NOT operate the unit with a damaged cord, plug, or other component.

• DO NOT alter or modify this product. Contact an electrician if you are unsure about the electrical connection.

• FOR INDOOR USE ONLY.

• KEEP OUT OF REACH OF CHILDREN.

POLARIZED: This appliance has a POLARIZED plug (one blade is wider than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not modify the plug in any way.

WARRANTY:

Zoo Med Laboratories, Inc. (Zoo Med) warrants each REPTI FOGGER™ Terrarium Humidifier to be free of defects in material and
workmanship under normal use and service for 90 days from the date of purchase. The obligation under this warranty is limited to
the repair or replacement, at Zoo Med’s discretion, of the product or any part thereof, when the product is returned to Zoo Med, freight
prepaid. No claim shall be allowed under this warranty if, in the opinion of Zoo Med, the REPTI FOGGER™ Terrarium Humidifier has
been subject to accident or improper usage, including but not limited to: water damage, improper storage, accidental dropping, etc.
This warranty is in lieu of all other warranties and representations express or implied. Please include your receipt, full name, address,
phone number, and email address along with a note explaining failure when sending any product back to Zoo Med. Please allow 4 to 6
weeks for repair or replacement.

OPTIONAL ACCESSORIES:

• Zoo Med’s HYGROTHERM™ Humidity and
Temperature Controller (Item# HT-10).

• Zoo Med’s Naturalistic Terrarium
(available in four sizes: Item#’s NT-1,
NT-2, NT-3 and NT-4).

• Zoo Med’s Precision Analog Reptile
Thermometer and Humidity Gauge
(Item# TH-22).

HT-10 NT-1, NT-2, NT-3, & NT-4 TH-22

ASSEMBLY & OPERATION:

1. Remove contents from package and inspect for damage. If any parts are missing or damaged, contact Zoo Med’s customer service
department at [e-mail] or [phone].

2. Place the Fogger Base Assembly (A) in the desired location, next to your terrarium but away from direct sunlight.

3. Wash the water bottle (B) with a mild dish soap solution, rinse well, and dry.

4. Fill the Water Bottle (B) with clean water. Note: For best results, use distilled water. Mineral deposits from “hard water” will
accumulate on the transducer plate and shorten the life of the fogger.

5. Screw the “No Spill” Valve (E) onto the water bottle and insert the water bottle (B) into the hole on the left side of the
Fogger Base Assembly (A).

6. Place the Hose Nozzle Attachment (C) on the right side of the Fogger Base Assembly (A). Attach the Adjustable Hose (D) to the
nozzle (C) and route the hose into the terrarium. Be sure that the Hose Nozzle Attachment is firmly seated on the Fogger Base
Assembly (A).

7. Plug the fogger in and turn it on using the dial on the front of the unit. Adjust the fog output using the dial until the desired
level is achieved. It is best to use the Repti Fogger™ in conjunction with Zoo Med’s New HYGROTHERM™ automatic Humidity and
Temperature Controller.

8. Zoo Med’s REPTI FOGGER™ Terrarium Humidifier is equipped with an automatic shut-off feature that turns the fogger off when the
water reservoir is empty.

9. When refilling the water bottle, turn the unit off prior to removing the bottle and “no-spill” valve from the fogger base.

HELPFUL HINTS:

• Using ordinary tap water may shorten the life of your fogger. Zoo Med recommends using distilled water to prevent deposits from

forming on the transducer plate.

• For best results, plug the fogger into Zoo Med’s HYGROTHERM™ Humidity and Temperature Controller (item HT-10) for precise

humidity control in your terrarium or plug the fogger into a timer that turns the fogger on and off throughout the day to maintain
your desired humidity level. Operating the fogger in the “ON” mode for 24 hours per day will REDUCE the life span of the fogger.

A

PARTS ENCLOSED:

B

A. Fogger Base Assembly

B. Water Bottle

(one liter capacity)

C. Hose Nozzle

Attachment

D. Adjustable Hose

(Adjusts from 10”
to 32” in length)

E. “No Spill” Valve

E

C

D

ZOO MED LABORATORIES, INC. 3650 Sacramento Dr. • San Luis Obispo, CA 93401 U.S.A. • Phone: [phone] • Fax: [phone] • E-mail: [e-mail]

www.zoomed.com