ZYBS01
Zonyee Wireless Speaker User Manual
Zonyee ® Ultra Portable Wireless Stereo Pairing Splashproof Bluetooth Speakers
with 10W Dual-Drive Heavy Subwoofers, Hands Free Calls, Support A2DP/NFC/TF
Card, Dustproof and Shockproof Also
Bluetooth 4.0 chip set connects faster, more stable, compatible with all your
Bluetooth-equipped Devices. 8 Watts of total output power driven by two
40mm drivers and a massive passive radiator for incredible sound quality to
take sound everywhere you play.
How to use
General Function
Press the (Button 1) about 2 seconds
When power on, speaker will into pairing mode
automatically
Press (Button 4) to play when the device is pausing
and press (Button 4) to pause when the device is
playing
Press the (Button 1) for 3 seconds
Plug the charger to port of the device (three led lights
will flash)
Press the (Button 2) for 1 second
Press the (Button 2) for 1 second
Press the (Button 2) for 2 seconds
After connecting speaker to phone via Bluetooth, press
the (Button 4 or 2) to photograph
40mm 4Ohm,2×1.5 inch speakers
11 hours (medium volume), 6 hours (
Maximum volume)
Pairing to a computer and Entertainment
1. If your laptop doesn’t have Bluetooth, you can use a Bluetooth
adapter.(Bluetooth adapter not be included)
2. Turn on the device to go to the pairing mode.
3. Open the Bluetooth software (such as BlueSoleil) installed on your laptop,
and selects “Search your Bluetooth device” function. Refer to user manual
of the Bluetooth software for more information.
4. After a few second the “ZYBS01” will list in Bluetooth software of your laptop
as a discovered device. Select this icon and click right button of mouse to
select “Pairing” item, then select “connect with audio device” with same
operation.
5. Open your media player soft to play music, watch TV/ movie and play game,
then all the sound will be playback on your device.
Charging your speaker
Make sure your speaker is fully charged for at least 6 hours before initial use.
While charging, the white LED lights flash constantly. When charging is
completed, the white LED lights would stay.
Technical specification