ZONOKI DIGITAL TECHNOLOGY Z B97 User Manual

Z-B97 Operation Manual

Thank you for using our company’s sport Bluetooth headset product, for your fast, skilled
operate of this product, easy, happy to use this product. Please read this manual carefully.

A.Use range:

1. Pair with the Bluetooth mobile, wireless enjoy mobile phone music and incoming call.

2.Pair with PC (with Bluetooth function or connect USB adapter), wireless enjoy network
music;

3.Pair with PC (with Bluetooth function or connect USB adapter) wireless remote chat
(support QQ, SKYPE, MSN, etc.).

4.Support for iPhone, iPad, enjoy music and voice transmission wirelessly.

B．Accompanying accessories

1. Z-B97 wireless stereo buletooth headset 1pc

2.USB Charging cable 1pc

3.Operation manual 1pc

4.Warranty card 1pc Optional Card

5. Silica gel(large size) 1 pair

C．Start Use

1.Charge Bluetooth headset
Headset has built-in rechargeable lithium battery. The first time using it, please charge

it at least 4 hours to let it full of energy. After the first time using, charge it 1 -2 hours will be
enough. When charging the red light is bright,when the battery is saturated the blue light is
bright. Fully charged battery can support about 5 hours of continuous working hours.

Connecting USB cable directly to computer to charge (Suggest:Don’t use the car

charger at first time).

2.Button Definition and Function

S1.Multifunction key: Play/Pause(stereo status),on/off, answer/end the calls, reject a

call(incoming call status), Redial and pairing to other Bluetooth devices.

S2. Previous key: Play Previous (stereo status), speaker silent(phone state)

S3.Next key: Play next (stereo status), mobile/Bluetooth switch( phone state)

S4. Volume “+”
S5.Volume “-”
LED: work indicator

（3）Connect to bluetooth device

Z-B97 should be paired to mobile phone(or other Bluetooth devices) before
operating..

1).First step:

Shutdown status: Press S1 key for 5 seconds→red & blue lights flash twice at the

same time→ headset with"de" sound→ red & blue lights start flashing alternately,
→headset with “bi,bi...”sound→enter into pairing status.

2).Second step:
Begin to pairing on your mobile(Please refer to mobile user manual).After searching
you will get “Z-B97” in your mobile equipment list.

3).Third step:
You will be required to enter Pin-Code→Password 0000 is needed to enter→Pairing
successfully.
(Note: 0000 is a default pairing Pin-Code for bluetooth headset, some mobile phones
support simple pairing do not need to enter Pin-Code, now most of the new mobile
phones are support simple pairing)

4).Fourth step:
Pairing successfully→headset with “bi,bi...”sound→ blue light flash per 4 seconds. If

pairing unsuccessfully, its' need to re- pairing.

Note:
If headset cannot find the pairing equipment in 3 minutes will automatically shutdown.
If headset isn’t in pairing status,your mobile and other bluetooth equipments cannot search
headset,please set the headset on pairing status then your mobile can begin to search.

4. Start-up & Shutdown

1. Start-up headset

Shutdown status: Press S1 key for 5 seconds→red & blue lights flash →headset with
“bi,bi...”sound→ stop press S1 key→start-up headset successfully, begin to connecting
mode→automatic search has been paired device→connected to stereo while the blue light
flash once per second. If not connected, then enter into the standby mode, the red light
flashes continuously, 3 minutes later will automatically shutdown.

2. Shutdown headset

1）Start-up status: Press S1 key for 3 seconds→red & blue lights flash quickly for one

time→headset with “de”sound→shutdown.

2）When Searching the equipment or without the receive range of headset, it will

automatically shutdown after not get any connection in 3 minutes.

Wireless status indicator:

Blue light flash slowly Bluetooth:Connection has been established, the

headset can start operating.
Red&blue light flash
alternately

Bluetooth: Quickly flashing indicate the headset can be

connected, but not connected.

No indicator Power off

Battery status

Indicator Battery Note
Red light flash

<10% Left less than 30 minutes using time
with alarm
Stable red light Charging
Stable blue light Finish charging

D. Basic Use Method
Dial，Talk & Finish calls

After the bluetooth headset finish pairing with your mobile,you can use the headset to

answer the phone or enjoy the mobile stereo music.

1. Mobile dial,talk and finish calls
Dial a call

Dial-up using the phone's keypad

1).Using your phone, dial numbers as usual in the same manner, during connecting ,

headphones with vibration ring tones. When getting calls, sound will be automatic in the

Bluetooth headset, after getting the calls,the red light flash 2 times per second. If you want

to hang up, just press S1 key once.

2).Press the S1 key twice, can automatic to dial the telephone No. last time,when getting

call,sound will be automatic in the bluetooth headset,after getting the calls,the blue flash 2

times per second.If you want to hang up, just press S1 key once.

Talk & finish calls

When the calls comes,you can hear the alarm sound“Di,Di....”，the headset red light keep

lighting.

a． The mobile ringing→press shortly the S1 key or press the receiver key on mobile→

blue light flashes 2 times per second. If need to hang up, press S1 key once.

b.Call: Press shortly the S3 key,go to the mobile phone, and then press the S3 key again
to answer the call. (Some phones may not support this feature, the call forwarding can not
be completed)

c.When call coming, if you want to refuse, you can press S1 key twice shortly.

d． During talking,press S4 key,volume +,press S5 key,volume -. Press long time ,can
control the Volume（from low to high total 15 levels,you can hear “Bi ,Bi”when on low or on
hight）.
e． Press S1 key shortly,off key on mobile or the order side hang up the call to finish
calls, after finish, blue light flash four times per second.

Speaker silent(phone state)

During the calling, if you need to talk with other people around you, but don't want to
hang up, and also don't want the other side hear the conversation, you can press S2 key,
after you hear beep sound in the headset, you can talk with other people around you safely,
no need to worry about the conversation be heard by the other side.Re-press S2 key shortly,
to restore speaker calling function.

2. Mobile Stereo music Play Mode(default state after connected with bluetooth

headset)

Need the pairing mobile phone support stereo music playing.

a．Playing music, press S3 key quickly to Backward.
b．Playing music, press S2 key quickly to Upward.
c ． Playing music, press S1 PLAY key quickly,music stops.Press S1 PLAY key

quickly,music playing.

Note ：Base on different design for different mobiles,during the headset stand-by

mode,the bluetooth connection may be automatically cut off.