ZONOKI DIGITAL TECHNOLOGY Z B96 User Manual

Z-B96 Stereo Bluetooth Headset Operation Manual

Thank you for using our company’s sport Bluetooth headset product, for your fast, skilled operate of this

product. Please read this manual carefully.

A.Use range:

1. Pair with the Bluetooth mobile, wireless enjoy mobile phone music and incoming call.

2.Pair with PC (with Bluetooth function or connect USB adapter), wireless enjoy network music;

3.Pair with PC (with Bluetooth function or connect USB adapter) wireless remote chat (support QQ,

SKYPE, MSN, etc.).

4.Support for Bluetooth mobile phone like iPhone, or tablet pc like iPad, enjoy music and voice

transmission wirelessly.

B．Accompanying accessories

1. Z-B96 wireless stereo buletooth headset 1pc

2.USB Charging cable 1pc

3.Operation manual 1pc

4.Warranty card 1pc Optional Card

5. Silica gel 1 pair

C．Start Use

1. Charge Bluetooth headset

Headset has built-in rechargeable lithium battery. The first time using it, please charge it at least 4 hours

to let it full of energy. After the first time using, charge it 1 -2 hours will be enough. When charging the red

light is bright,when the battery is saturated the blue light is bright. Fully charged battery can support about

5 hours of continuous working hours.

Connecting USB cable directly to computer to charge (Suggest:Don’t use the car charger at first time).

2.Button Definition and Function

S1.Multifunction key: Play/Pause(stereo status),on/off, answer/end the calls, reject a call(incoming call

status), Redial and pairing to other Bluetooth devices.

S2. Previous key: Play Previous (stereo status), speaker silent(phone state)

S3.Next key: Play next (stereo status), mobile/Bluetooth switch( phone state)

1

S4. Volume “+”

S5.Volume “-”

LED: work indicator

（3）Connect to bluetooth device

Z-B96 should be paired to mobile phone(or other Bluetooth devices) before operating.

(1).First step:

Shutdown status: Press S1 key for 5 seconds→red & blue lights flash twice at the same time→

headset with"de" sound→ red & blue lights start flashing alternately, →headset with “bi,bi...”sound→enter

into pairing status.

2).Second step:

Begin to pairing on your mobile(Please refer to mobile user manual).After searching you will get

“Z-B97” in your mobile equipment list.

3).Third step:

You will be required to enter Pin-Code→Password 0000 is needed to enter→Pairing successfully.

(Note: 0000 is a default pairing Pin-Code for bluetooth headset, some mobile phones support simple

pairing do not need to enter Pin-Code, now most of the new mobile phones are support simple pairing)

4).Fourth step:

Pairing successfully→headset with “bi,bi...”sound→ blue light flash per 4 seconds. If pairing

unsuccessfully, its' need to re- pairing.

Note:

If headset cannot find the pairing equipment in 3 minutes will automatically shutdown.

If headset isn’t in pairing status,your mobile and other bluetooth equipments cannot search

headset,please set the headset on pairing status then your mobile can begin to search.

4. Start-up & Shutdown

1. Start-up headset

Shutdown status: Press S1 key for 5 seconds→red & blue lights flash →headset with “bi,bi...”sound→

2

stop press S1 key→start-up headset successfully, begin to connecting mode→automatic search has

been paired device→connected to stereo while the blue light flash once per second. If not connected,

then enter into the standby mode, the red light flashes continuously, 3 minutes later will automatically

shutdown.

2. Shutdown headset
1）Start-up status: Press S1 key for 3 seconds→red & blue lights flash quickly for one time→headset with

“de”sound→shutdown.
2）When Searching the equipment or without the receive range of headset, it will automatically shutdown

after not get any connection in 3 minutes.

Wireless status indicator:

Blue light flash slowly Bluetooth:Connection has been established, the headset

can start operating.

Red&blue light flash alternately Bluetooth: Quickly flashing indicate the headset can be

connected, but not connected.

No indicator Power off

Battery status

Indicator Battery Note

Red light flash with alarm <10% Left less than 30 minutes using time

Stable red light Charging

Stable blue light Finish charging

D.

Ba

sic

Us

e Method

Dial，Talk & Finish calls

After the bluetooth headset finish pairing with your mobile,you can use the headset to answer the

phone or enjoy the mobile stereo music.

1. Mobile dial,talk and finish calls

Dial a call

Dial-up using the phone's keypad

1).Using your phone, dial numbers as usual in the same manner, during connecting , headphones with

vibration ring tones. When getting calls, sound will be automatic in the Bluetooth headset, after getting

the calls,the blue light flash 2 times per second. If you want to hang up, just press S1 key once.

2).Press the S1 key twice, can automatic to dial the telephone No. last time,when getting call,sound will

be automatic in the bluetooth headset,after getting the calls,the blue flash 2 times per second.If you

want to hang up, just press S1 key once.

Talk & finish calls

When the calls comes,you can hear the alarm sound“Di,Di....”，the headset red light keep lighting.

3