Copyright Statement
is the registered trademark of Zonet Technology Inc. All the
products and product names mentioned herein are the trademarks or registered
trademarks of their respective holders. Copyright of the whole product as
integration, including its accessories and software, belongs to Zonet Technology
Inc. Without the permission of Zonet Technology Inc., any individual or party is
not allowed to copy, plagiarize, imitate or translate it into other languages.
802.11g Wireless USB Adapter
Table of Content
Chapter 1.
1.1 Welcome…………………………………………….…………………………2
1.2 Product Feature…………………………………………………………………2
1.3 Content of Package……………….…………………….……………………2
Chapter 2. Installation…………………………………………………………………3
Chapter 3. Configuration………………………………………………………..……6
3.1 Station Mode…….………………………………………………………..……6
3.1.1
3.1.1.1 Add/Edit Profile…………………………………………......……7
3.1.2 Network.......………………………………………………………………9
3.1.3 Link Status
3.1.4 Advanced……………..……….…………………………………………10
3.1.5 Statistics……………..……….…………………………………………10
3.1.6 WMM….......................………........………………..………………11
3.1.7 WPS….......................………........………………..………………12
3.2
AP Mode………………..…....……………………………….…………..13
3.2.1
3.2.2 Access Control…......………..………………………...………..……15
3.2.3 MAC Table...........………..…………………………....………………16
3.2.4 Switch to Working Station Mode..………………………………16
3.3
Use Zero Configuration................................….……….…………..17
Chapter 4. How to connect with PSP………………………………………….20
4
.1 Configure PSP with Ad-Hoc mode……………………………….………20
4.2 Configure XLink Kai…………………………………………………………22
Chapter 5. Product Specifications………….........................……………….23
Chapter 6. TroubleShooting………….........................………….............24
Introduction……………………………………………………………2
Profile
…….……........……………………………………………..……7
…………………………………………………………..…...9
Configuration………..……………………………………………...….13
1
802.11g Wireless USB Adapter
Chapter 1 Introduction
1.1 Welcome
Thank you for purchasing Zonet ZEW2500P-802.11g wireless USB adapter.
ZEW2500P connects you with 802.11g networks at up to an incredible 54Mbps!
And for added versatility, it can also interoperate with all the up to 11Mbps
802.11b products found in homes, businesses, and public wireless hotspots
around the country.
Soft AP supported by ZEW2500P can help you establish wireless LAN networking
with lowest cost. Besides, WPS (Wi-Fi Protected Setup) simplify the security
setup and management of Wi-Fi networks. Supports WMM for Multimedia
Applications with Quality of Service in Wi-Fi® Networks. Especially supporting
PS3, PSP, Nintendo DS and Wii connections with XLink Kai software will be your
best choice to enjoy on-line gaming.
1.2 Product Feature
Complies with IEEE 802.11g and IEEE 802.11b standards
Provides USB2.0 port
Provides up to 54Mbps transmission rate and up to 300 meters
transmission distance
Auto-detects and changes the network transmission rate
Provides two work modes: Infrastructure and Ad-Hoc
Supports Soft AP to establish your wireless LAN networking
supports PS3, PSP, Wii and Nintendo DS connecting with Internet and
XLink Kai to enjoy on-line gaming
Supports 64/128-bit WEP, WPA, WPA2 encryption methods and 802.1x
security authentication standard
Supports Wireless Roaming function
WPS (Wi-Fi Protected Setup) simplify the security setup and management
of Wi-Fi networks.
Supports WMM for Multimedia Applications with Quality of Service in
Wi-Fi® Networks
Supports Windows 2000 / XP / 2003 / Vista
1.3 Contents of Package
One ZEW2500P
One Installation CD w/User Manual
One Quick Installation Guide
One USB Cable
Contact your local authorized reseller or the store purchased from for any items
damaged and/or missing.
2
802.11g Wireless USB Adapter
Chapter 2 Installation
NOTE:
1. Insert ZEW2500P into a USB
2. Select Cancel when Found
1. For future driver upgrading, please visit our website at www.zonetusa.com
2. Snap-shot screens of the following installation procedure are based on Windows
XP. Installation procedures will be similar for other windows operating systems.
slot of your computer.
New Hardware window
appears.
3.
Insert Installation CD to your
CD-ROM drive. Browse CD and
double-click
Setup.exe
in
Driver folder to execute it. The
wizard will run and install all
necessary files to your
computer automatically.
3
802.11g Wireless USB Adapter
4. C
lick
Next
to accept the
Agreement. Or click
cancel the installation
5.
Select
Install driver and
Ralink WLAN Utility
Install driver only
Next
.
Cancel
to
.
or
then click
6.
Select
Tool
Configuration Tool
Ralink Configuration
or
Microsoft Zero
then click
Next.
a. It’s recommended to select
Ralink Configuration Tool,
which provides fully access to
all function of ZEW2500P.
b. If you prefer to use the
wireless configuration tool
provided by Windows XP or
Vista, please select Microsoft
Zero Configuration Tool.
4
802.11g Wireless USB Adapter
7.
Click
installation. Or click
to cancel the installation
Install
to start
Cancel
.
8. Click Finish to complete the
software installation.
You will see a tray icon appear in your system tray at the bottom of the
screen after the software and hardware installation completed successfully.
5
802.11g Wireless USB Adapter
Chapter 3 Configuration
3.1 Station Mode
Station Mode is the default access mode for ZEW2500P.
In this mode, ZEW2500P serves as a client to receive the wireless signals to
access the Internet.
Double-click the tray icon to launch the configuration utility.
Or right click the tray icon and select Launch Config Utility.
6
802.11g Wireless USB Adapter
3.1.1 Profile
Profile can keep your favorite wireless setting among your home, office, and
other public hotspot. You may save multiple profiles and activate the one at your
preference.
Add:
Edit:
Delete:
Activate:
to create a new profile
to edit/modify/change parameter of an existing profile
to delete an existing profile
to make an existing profile become active and to connect
3.1.1.1
Add/Edit Profile
a. System Configuration
Power Save Mode:
a. CAM
(Constantly Awake Mode) – ZEW2500P will stay power-ON as long
as the computer is connected to a power outlet.
b. PSM
(Power Saving Mode) – ZEW2500P will hibernate when the
computer is hibernating.
7
802.11g Wireless USB Adapter
Network Type:
a. Infrastructure
b. Ad-hoc
TX Power:
– Peer-to-Peer network, no base station required.
– A wireless Router and/or Access Point is required.
Amount of transmit power used by the radio transceiver to send out signal.
User can choose different value in the drop down menu
Preamble:
Only available under Ad-hoc mode. Value can be chose from Auto, Long, or
Short
Threshold:
Frame size when RTS/CTS handshake performs before attempt to transmit.
a. RTS Threshold:
b. Fragment Threshold:
Default value = 2347
Default value = 2346
b.
Authentication and Encryption
Authentication:
WPA2-PSK.
Encryption:
c. 802.1X
Open, Shared, Leap, WPA, WPA-PSK, WPA2 and
Algorithm used in BSS or IBSS, WEP, TKIP, AES, and None
8
802.11g Wireless USB Adapter
3.1.2 Network
Under Network tab, you will know information of all surrounding wireless
networks from the last scan.
Click
Rescan
to update and refresh.
3.1.3 Link Status
Link status page shows detail information about the current connection.
9
802.11g Wireless USB Adapter
3.1.4 Advanced
The Advanced tab shows Advance function of UI
Enable Tx Burst:
with an Access Point that has the same technology.
Enable TCP Window Size:
Ralink’s proprietary frame burst mode. Suggest using
Check this box and the configuration utility will
adjust TCP window size automatically to get better performance.
Fast Roaming at:
Enable CCX(Cisco Compatible eXtensions):
Fast to roaming, setup by transmitting power
a. LEAP – Turn on CCKM
b. Enable Radio Measurement:
channel measures every 0~2000
milliseconds
3.1.5 Statistics
Statistics tab displays the detail counter information based on 802.11 MIB
counters. This page translates that MIB counters into a format easier for user to
understand.
10
802.11g Wireless USB Adapter
3.1.6 WMM
WMM Enable: Enable Wi-Fi Multi-Media
WMM - Power Save Enable: Enable WMM Power Save
Direct Link Setup Enable: Enable DLS (Direct Link Setup). This function will
greatly improve the data transfer rate between WMM-enabled wireless
devices.
a. MAC Address: Input the MAC address of another WMM-enabled wireless
device you wish to establish a direct link.
b. Timeout Value: must be between 0~65535 in integer. If the value is zero
represents it always connects. Default value of Timeout Value is 60
seconds.
c. Tear Down: If you want to remove a specific wireless device from DLS
table, select the device and click this button to remove it.
11
802.11g Wireless USB Adapter
3.1.7 WPS
WPS tab supports the configuration setup using PIN configuration method or PBC
configuration method.
WPS(Wi-Fi Protected Setup) simplify the security setup and management of Wi-Fi
networks.
PIN: Enter the Pin code and click PIN to automatically connect ZEW2500P
with wireless devices around.
PBC: Click PBC to complete auto-check and connections between ZEW2500P
and other wireless device.
Renew: Click to update the Pin code.
Rescan: Update information on surrounding wireless network.
Connect: click to connect the WPS wireless network.
Disconnect: to disconnect the connected wireless network.
12
802.11g Wireless USB Adapter
3.2 AP Mode
ZEW2500P also can serve as an access point to transmit wireless signals and
create wireless network, allowing other wireless clients to access the network.
Right-click the tray icon and select Switch to AP Mode.
3.2.1 Configuration
In soft AP configuration Utility page, you can make some basic configurations,
such as wireless network name, mode, channel and authentication.
13
802.11g Wireless USB Adapter
Click Security Setting button to make different security configurations of
wireless communication, and you can choose the authentication type or
encryption type.
Note:
1. The Hex characters include 0~9 numbers and a~f letters.
2. ASCII characters include any numbers/letters and characters.
14
802.11g Wireless USB Adapter
3.2.2 Access Control
Choose Access Control tab to start MAC control. Access control includes Allow
All and Reject All. After editing the MAC address access list, only the MAC in the
Allow All list could access the Soft AP.
15
802.11g Wireless USB Adapter
3.2.3 MAC Table
MAC Table page shows the information of the wireless devices accessed to this
soft AP.
3.2.4 Switch to Working Station mode
In the Soft AP mode, right-click the icon in the system tray and choose
Switch to Station Mode, then ZEW2500P is switching to working station mode
with an interface of working station.
16
802.11g Wireless USB Adapter
3.3 Use Zero Configuration
Windows XP and Vista has a built-in wireless network configuration utility
“Windows Zero Configuration” (WZC).
wireless clients from Windows
1. Start using WZC, r
ight click the tray icon and select Use Zero
Configuration as Configuration utility.
2. The windows wireless network connection will appear. Double click the
It is a built in service to configure your
wireless network icon on the system tray to check the wireless network,
choose the network and click Connect to setup the association.
3. If your wireless router has been encrypted, there will be a window appeared
for input the key. Please input the key and click Connect, then the connection
connect.
17
802.11g Wireless USB Adapter
4. To configure the wireless connect properties, please right click the wireless
icon in the system tray and choose Status to open the page Wireless
Network Connection Status.
5. Click Properties button in General page and choose the tab Wireless
Networks to add the SSID of available network by clicking Add, if there are
several available networks, linking priority could be configured by the button
Move up and Move down. The icon shows the current linked AP. Click
Properties to configure authentication of wireless connection.
18
802.11g Wireless USB Adapter
6. Advanced page configures firewall and connection sharing.
19
Chapter 4 How to connect with PSP
4.1 Configure PSP with Ad-Hoc mode
1. Select Network Settings on PSP
802.11g Wireless USB Adapter
2. Select Ad-Hoc mode on PSP
3. Select Channel on PSP
20
802.11g Wireless USB Adapter
4. Select Start →→→→ Control Panel →→→→ double-click System icon →→→→ select
Hardware tab →→→→ click Device Manager button → select ZEW2500P
(802.11 USB Wireless LAN Card) list in Network adapters
5. Double-click 802.11 USB Wireless LAN Card to configure properties →
select Advanced tab → select PSP XLink Mode list in Property and
choose Enable from Value drop-down menu.
21
802.11g Wireless USB Adapter
4.2 Configure XLink Kai
XLink Kai is a global gaming network - bringing together XBox, Playstation,
Gamecube and PSP users, in one integrated community. It is software running on
your PC or Macintosh that allows you to play system-link enabled games online
for free.
Select Start →→→→ All programs →→→→ XLink Kai Evolution VII →→→→ Start Kai Config
to configure the user name, password and other parameters.
Login XLink Kai: Select Start →→→→ All programs →→→→ XLink Kai Evolution VII →
Start Kai. PSP will connect with XLink Kai automatically. The following window
will indicate the connection is established well now.
22
802.11g Wireless USB Adapter
13 Channels (Europe)
Printed
antenna
Chapter 5 Product Specifications
Standard IEEE 802.11b, IEEE 802.11g
Frequency Band 2.4GHz ~ 2.4835GHz
Spread Spectrum
Modulation Method
Data Rate
Transmit Output Power
RF Power
Channels
Transmit distance
Roaming
Media Access Protocol
Security
DSSS, OFDM
BPSK, QPSK, CCK, QAM and OFDM
11g: 54/48/36/24/18/12/9/6Mbps
11b: 11/5.5/2/1Mbps
54Mbps : -72dBm
11Mbps : -88dBm
11g: 14dbm
11b: 18dbm
11 Channels (USA, Canada)
14 Channels (Japan)
Indoors : up to 100 meters
Outdoors : up to 300 meters
Support multipoint auto roaming and
configuration
Support wireless network environments auto
detect
WMM
WPA/WPA2; 64/128-bit WEP; TKIP/AES
I/O Interface USB 2.0
LED Indicators Link / Power
Operating System Windows 2000 / XP / 2003 / Vista
Operating Temp. 0 °C ~ 40 °C
Storage Temp. -20 °C ~ 70 °C
Humidity 10% ~ 90% (non-condensing)
Dimension(L x W x H) 64.8mm x 95.4mm x 12.6mm
Weight
Cable Length
42g
1m
23
802.11g Wireless USB Adapter
Chapter 6. TroubleShooting
This chapter provides solutions to problems that may occur during the installation
and operation of ZEW2500P. Read the descriptions below to solve your problems.
1. The ZEW2500P does not work properly.
Reinsert ZEW2500P into your PC’s USB slot.
Right click on My Computer and select Properties. Select the device manager and
click on the Network Adapter. You will find ZEW2500P if it is installed successfully.
If you see the yellow exclamation mark, the resources are conflicting. You will see
the status of ZEW2500P. If there is a yellow question mark, please check the
following:
Make sure that your PC has a free IRQ (Interrupt ReQuest, a hardware interrupt
on a PC.)
Make sure that you have inserted the right adapter and installed the proper driver.
If ZEW2500P does not function after attempting the above steps, remove it and
do the following:
Uninstall the driver software from your PC.
Restart your PC and repeat the hardware and software installation as specified in
this User Guide.
2. I cannot communicate with the other computers linked via Ethernet in
the Infrastructure configuration.
Make sure that the PC to which ZEW2500P is associated is powered on.
Make sure that ZEW2500P is configured on the same channel and with the same
security options as with the other computers in the Infrastructure configuration.
3. What should I do when the computer with ZEW2500P installed is
unable to connect to the wireless network and/or the Internet?
Check that the LED indicators for the broadband modem are indicating normal
activity. If not, there may be a problem with the broadband connection.
Check that the LED indicators on the wireless router are functioning properly. If
not, check that the AC power and Ethernet cables are firmly connected.
Check that the IP address, subnet mask, gateway, and DNS settings are correctly
entered for the network.
In Infrastructure mode, make sure the same Service Set Identifier (SSID) is
specified on the settings for the wireless clients and access points.
In Ad-Hoc mode, both wireless clients will need to have the same SSID. Please
note that it might be necessary to set up one client to establish a BSS (Basic
Service Set) and wait briefly before setting up other clients. This prevents several
clients from trying to establish a BSS at the same time, which can result in
multiple singular BSSs being established, rather than a single BSS with multiple
clients associated to it.
Check that the Network Connection for the wireless client is configured properly.
If Security is enabled, make sure that the correct encryption keys are entered on
both ZEW2500P and the access point.
24
802.11g Wireless USB Adapter
4. I can’t find any wireless access point / wireless device in Network tab.
Click Rescan for few more times and see if you can find any wireless access
point or wireless device.
Please move closer to any known wireless access point.
Ad-hoc function must be enabled for the wireless device you wish to establish
a direct wireless link.
Please adjust the position of ZEW2500P (you may have to move your
computer if you’re using a notebook computer) and click Rescan button for
few more times. If you can find the wireless access point or wireless device
you want to connect by doing this, try to move closer to the place where the
wireless access point or wireless device is located.
5. Nothing happens when I click Launch config utilities
Please make sure ZEW2500P is inserted into your computer’s USB port. If the
Ralink configuration utility’s icon is black, ZEW2500P is not detected by your
computer.
Reboot the computer and try again.
Remove ZEW2500P and insert it into another USB port.
Remove the driver and re-install.
6. I can not establish connection with a certain wireless access point
Click Connect for few more times.
If the SSID of access point you wish to connect is hidden (nothing displayed
in SSID field in Network tab), you have to input correct SSID of the access
point you wish to connect.
You have to input correct passphrase / security key to connect an access
point with encryption.
The access point you wish to connect only allows network cards with specific
MAC address to establish connection. Please go to About tab and write the
value of Phy_Addess down, then present this value to the owner of access
point to add the MAC address of your ZEW2500P to owner’s access point’s
list.
7. The network is slow / having problem when transferring large files
Move closer to the place where access point is located.
Enable Wireless Protection in Advanced tab.
Try a lower TX Rate in Advanced tab.
Disable Tx Burst in Advanced tab.
Enable WMM in WMM tab if you need to use multimedia / telephony related
applications.
Disable WMM – Power Save Enable in WMM tab.
There could be too much people using the same radio channel. Ask the owner
of the access point to change the channel number.
25
Loading...