Zonet ZVC7610, ZVC7610W lNSTALLATION GUIDE

1 Getting Started

Package Contents

 One ZVC7610 or ZVC7610W
 One AC Power Adapter
 One Camera Stand
 One RJ-45 Ethernet Cable
 One Installation CD w/ User Manual
 One Quick Installation Guide
 One Wireless Antenna (ZVC7610W only)

System Requirement

 Networking

LAN: 10Base-T Ethernet 100Base-TX Fast Ethernet.
WLAN: IEEE 802.11b/g (ZVC7610W only)

 Accessing the Camera using Web Browser

Platform: Windows 2000/XP/Vista, Macintosh OSX
CPU: Intel Pentium III 800MHz or above
RAM: 512MB
Resolution: 800x600 or above
User Interface: Internet Explorer 6.0 or above, Mozilla Firefox 2.00 or above,

Apple Safari 2 or above

- 1 -

2 Setting Up the Camera

Installing the Camera Stand

ZVC7610/ZVC7610W comes with a Camera Stand. It uses a swivel ball screw
head to lock to the camera’s screw holes. Attach the Camera Stand and you
can place the unit anywhere by mounting the camera through the three screw
holes which located at the bottom of the Camera Stand.

The Camera Stand

Connect ZVC7610 to your Network (LAN)

Use the provided RJ-45 Ethernet cable to connect the ZVC7610 to your local
area network (LAN).

ZVC7610 will power ON automatically after the AC Power Adapter is connected.
You may also verify the power status from the Power LED on the front panel.

The Link LED will start flashing in green light. ZVC7610 will be on standby
mode and it is ready to use.

- 2 -