Zonet ZUB6111C lNSTALLATION GUIDE
Bluetooth USB Adapter
Installation Guide
VERSION 1.1
FOR HOME OR OFFICE USE
Bluetooth
Tested To Comply
With FCC Standards
© All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
The Bluetoothname and the Bluetoothtrademarks are owned by BluetoothSIG,Inc.
This manual may not be copied in any media or form without the written consent of original
maker.
TABLE OF CONTENTS
WELCOME ................................................................. 1
Features ............................................................... 1
System Requirements ............................................... 1
Before You Start .................................................... 1
Driver Support ........................................................ 2
1. WINDOWS NATIVE DRIVER .......................................... 3
2. INSTALL WIDCOMM DRIVER ......................................... 4
3. CHANGE BLUETOOTH DRIVER...................................... 7
4. SELECT BLUETOOTH SERVICES..................................... 10
5. MY BLUETOOTH PLACES ............................................ 12
APPENDIX A ............................................................... 14
FCC ........................................................................ 15
WARRANTY ............................................................... 16
WELCOME
Thank you for your purchase of the Bluetooth USB Adapter. Featuring Bluetooth wireless technology, Bluetooth USB Adapter creates
cable-free connections between your PCs and other Bluetooth devices.
Bluetooth USB Adapter is following Bluetooth v1.2 specification and is
compatible with all Bluetooth v1.1 or v1.2-certified devices.
FEATURES
Compliant with Bluetooth standard version 1.2.
Support for Microsoft Windows 98SE, Me, 2000 and XP.
Easy operation and setting up.
SYSTEM REQUIREMENTS
Processor : Intel Celeron / Pentium III, IV; AMD Duron / Athlon
Operating System : Microsoft Windows 98SE / ME / 2000 / XP
System memory : 32MB at least
Hard Drive Free Space : 11.5MB
BEFORE YOU START
1). Remove any Microsoft native driver.
2). Please remove any previous version of Widcomm Bluetooth software
existing in your system. The remove procedures are as follows:
Step 1 : Click Start/Settings, then select Control Panel.
Step 2 : In the Control Panel window, double click Add/Remove programs
icon.
Step 3 : Find out the item Widcomm Bluetooth Software x.x.x.x then
remove it.
1
DRIVER SUPPORT
Two Bluetooth drivers are supported under Windows XP (SP2) :
1). Windows XP (SP2) native Bluetooth driver.
Windows XP (SP2) is supporting Broadcom USB Bluetooth dongle
now. The installation is simple and easy, just plug Bluetooth donge into
USB port of your PC, Windows XP will automatically find its driver for it.
Microsoft driver only supports limited Bluetooth profiles. You
can choose Widcomm driver for more advanced purposes.
2). Widcomm Bluetooth driver.
After Windows XP (SP2) native Bluetooth driver is installed, you
also can install one additional Widcomm driver for advanced features,
such as supporting more Bluetooth profiles, easy and friendly user
interface...etc.
Put Widcomm Driver CD into CD drive of your PC, then install it.
Once Widcomm driver is installed, it will automatically take over
previous Windows XP native driver. Two drivers are co-existig in your
system now, but only Widcomm driver is enabled and Windows XP driver
is disabled.
Condition 1 : Windows and Widcomm drivers co-exist in your PC.
1). Plug Bluetooth dongle to your system first, get Windows XP driver
support.
2). Put Widcomm Driver CD into CD drive of your PC, then install it.
3). Refer to “Change Bluetooth Driver” section to learn how to change
driver between them.
Condition 2 : Only Widcomm driver exists in your PC.
1). DO NOT plug Bluetooth dongle to your system first.
2). Put Widcomm Driver CD into CD drive of your PC, then install it.
During installation, it will ask you to plug in dongle, please do it to complete the installation.
Now, you have only one Widcomm driver existed in your system. It is
impossible to turn on Windows native driver. Unless you remove
Widcomm driver, then follow steps 1 to 3 in Condition1 to have both
drivers supported.
2
WINDOWS NATIVE DRIVER
Step 1 : Remove any Widcomm Bluetooth driver.
Click START, select Control Panel, select System, select Device Manager.
In Bluetooth Radios, make sure there is no Widcomm Bluetooth driver
installed before.
If there is any, go to Control Panel
window, double click Add/Remove
programs to remove Widcomm
driver.
Step 2 : Plug the Bluetooth USB
adapter into USB port of your PC,
Windows XP (SP2) will automatically
find this adapter and activate its
native driver for it.
After driver was installed :
Click START -> Settings.
Select Control Panel.
Select System.
Select Device Manager ->Hardware.
In Bluetooth Radios, you can find a
Windows native driver :
Blutonium BCM2035 Bluetooth
2.4GHz Single Chip Transceiver.
Step 3 :
Right-click Blutonium BCM2035
Bluetooth 2.4GHz Single Chip Transceiver and then select Property,
click on Driver page.
You can see driver provider is
Microsoft.
3
Loading...