Zonet ZSR4134WE User Manual
Copyright Statement
is the registered trademark of Zonet Technology Inc. All the products
and product names mentioned herein are the trademarks or registered trademarks of
their respective holders. Copyright of the whole product as integration, including its
accessories and software, belongs to Zonet Technology Inc. Without the permission of
Zonet Technology Inc., any individual or party is not allowed to copy, plagiarize, imitate
or translate it into other languages.
Table of Contents
Chapter 1 Introduction......................................................................... 1
Welcome.............................................................................................. 1
Contents of Package.............................................................................. 1
System Requirement ............................................................................. 1
Getting to Know Your ZSR4134WE .......................................................... 2
Chapter 2 Hardware Installation......................................................... 4
Chapter 3 Connect Your ZSR4134WE ................................................... 6
How to Check the Network Connection..................................................... 9
Chapter 4 Basic Configurations ...........................................................10
How to Access the Web-based Configuration Utility ..................................10
Setup Wizard.......................................................................................11
Chapter 5 Advanced Settings ..............................................................15
LAN Settings .......................................................................................15
WAN Settings ......................................................................................16
MAC Address Clone ..............................................................................19
DNS Settings .....................................................................................19
Chapter 6 Wireless Settings ................................................................20
Wireless Mode .....................................................................................20
Basic Settings......................................................................................22
Wireless Security Settings .....................................................................23
WPS Settings.......................................................................................28
WDS Settings ......................................................................................29
Advanced Wireless Settings...................................................................30
Wireless Access Control ........................................................................31
Wireless Connection Status ...................................................................31
Chapter 7 DHCP Server .......................................................................32
DHCP Server List..................................................................................33
Chapter 8 Virtual Server......................................................................34
Single Port Forwarding..........................................................................34
Port Range Forwarding..........................................................................35
Port Trigger Settings.............................................................................36
ALG Service Settings ............................................................................37
DMZ Settings.......................................................................................38
UPnP Settings......................................................................................38
Chapter 9 Traffic Control ...................................................................39
Chapter 10 Security Settings...............................................................40
Client Filter .........................................................................................40
URL Filter............................................................................................41
MAC Filter ...........................................................................................42
Prevent Network Attack ........................................................................42
Remote Web Management.....................................................................43
Local Web Management ........................................................................43
Wan Ping ............................................................................................44
Chapter 11 Routing Settings ...............................................................45
Routing Table .....................................................................................45
Static Routing ....................................................................................45
Chapter 12 System Tools.....................................................................46
Time Settings ......................................................................................46
DDNS .................................................................................................46
Backup/Restore ...................................................................................47
Firmware Upgrade................................................................................47
Restore to Factory Default Settings ........................................................48
Reboot................................................................................................48
Change Password.................................................................................49
System Log .........................................................................................49
Appendix 1 Product Features & Specifications ..................................50
Appendix 2 Troubleshooting...............................................................52
Chapter 1 Introduction
Welcome
Thank you for purchasing Zonet ZSR4134WE – 802.11n wireless broadband
router! This high cost-efficiency router is the best choice for Small office / Home
office users, all computers and network devices can share a single xDSL / cable
modem internet connection at high speed. Easy install procedures allows any
computer users to setup a network environment in very short time - within
minutes, even inexperienced. When the number of your computers and
network-enabled devices grow, you can also expand the number of network slot
by simple attach a hub or switch, to extend the scope of your network!
All computers and IEEE 802.11b/g/n(Draft 2.0) wireless-enabled network
devices (including PDA, cellular phone, game console, and more!) can connect
to ZSR4134WE without additional cabling. The MIMO technology also gives you
the highest speed of wireless experience ever! With a compatible wireless card
installed in your PC, you can transfer file for up to 300Mbps! The radio coverage
is also doubled, so don’t worry if your office or house is really big!
Moreover, the user-friendly Setup Wizard on the installation CD can assist you
to set up ZSR4134WE easily. It also can be managed or configured through
Local/Remote easy-to-use Web-based utility.
Contents of Package
One ZSR4134WE
One CD w/User Manual
One Quick Installation Guide
Two 3dBi Antennas
One Ethernet Network Cable
One Cradle
One Power Adapter
Contact your local authorized reseller or the store purchased from for any items
damaged and/or missing.
System Requirements
Internet connection, provided by xDSL or cable modem with a RJ-45
Ethernet port.
Computer or network devices with wired or wireless network interface card.
Web browser (Microsoft Internet Explorer 5.5 or above, Firefox 1.0 or
above).
An available power socket (100–240V, 50/60Hz)
1
Getting to Know Your ZSR4134WE
Top Panel
LED Indicator Status Description
POWER ON ZSR4134WE is switched on and correctly powered
SYS Flashing Indicates the system works normally.
ON Indicates WAN port is connected
WAN
Flashing
Indicates WAN activity (transferring or receiving
data)
WLAN Flashing Indicates the wireless signal is OK.
ON Indicates LAN port is connected
LAN(1/2/3/4)
Flashing
WPS Flashing
Indicates LAN activity (transferring or receiving
data)
Indicates ZSR4134WE is negotiating with WPS
clients in WPS Mode (PBC or PIN).
2
Rear Panel
Item Name Description
Antenna These antennas are 3dBi dipole antennas.
POWER Power connector, connects to power adapter
WAN Wide Area Network (WAN / Internet) port.
1-4 (LAN Ports) Local Area Network (LAN) ports 1 to 4
RESET/WPS
Reset ZSR4134WE to factory default settings (clear all
settings) or start WPS function. Press this button and hold
for 7 seconds to restore all settings to factory defaults,
and press this button for 1 second to start WPS function.
3
Chapter 2 Hardware Installation
Please follow the following instruction to build the network connection between
your ZSR4134WE and your computers, network devices:
1. Connect all your computers, network devices (network-enabled consumer devices
other than computers, like game console, or switch / hub) to the LAN port of
ZSR4134WE.
2. Connect the power adapter to the wall socket, and then connect it to the “Power”
socket of ZSR4134WE.
4
3. Connect your xDSL / cable modem to the WAN port of ZSR4134WE by Ethernet
cable.
4. Please check all LEDs on the top panel. POWER LED should be steadily on, WAN and
LAN LEDs should be on if the computer / network device connected to the
respective port of ZSR4134WE is powered on and correctly connected. If any LED
you expected is not on, please recheck the cabling, or jump to “Troubleshooting”
for possible reasons and solution.
5
Chapter 3 Connect Your ZSR4134WE
How to Set the Network Configurations for My Computer
1. Right click My Network Places and select Properties
2. Right click Local Area Network Connection and select Properties.
6
3. Select Internet Protocol (TCP/IP) and click Properties.
4. Select Obtain an IP address automatically and Obtain DNS server
address automatically. Click OK to save the configurations.
7
5. Or select Use the following IP address and enter the IP address, Subnet
mask, Default gateway. Of course, you need to input the DNS server address
provided by your ISP. Otherwise, you can use the ZSR4134WE’s default
gateway as the DNS proxy server. Click OK to save the configurations.
8
How to Check the Network Connection
1. Select Start →
Programs →→→→ Accessories →→→→ Command Prompt.
→→→
2. Input ping 192.168.0.1 and press Enter. If the screen displays as below, it
means your PC is connected to your router successfully.
If not, please make sure the hardware installation and network adapter are
OK.
9
Chapter 4 Basic Configurations
This section is to show you how to configure your new ZSR4134WE through the
Web-based Configuration Utility.
How to Access the Web-based Configuration Utility
1. After your computer obtained an IP address from ZSR4134WE, please start
your web browser, and input the default IP address of ZSR4134WE
http://192.168.0.1 in address bar.
2. Please input user name and password and then click OK.
Both default user name and password is admin.
10
Setup Wizard
1. When Welcome to Setup Wizard pop out, Click Next to continue.
2. Select one Internet connection type you’re using. If you’re not sure, click
Detect or contact your Internet Service Provider.
Click Next.
a. ADSL Virtual Dial-up (Via PPPoE)
Enter the Account and Password provided by your ISP, and click Next.
11
b. Dynamic IP (Via DHCP)
If your connection type is Dynamic IP, it means your IP address keeps
changing every time you connect. You do not need to enter the
information.
c. Static IP
Fill the network address information from your ISP in the IP Address,
Subnet Mask, Gateway and Primary DNS server fields and click Next.
d. L2TP
Enter the Account and Password provided by your ISP.
L2TP(Layer 2 Tunneling Protocol) provides two address modes.
Dynamic IP: If the L2TP offered by your ISP is Dynamic IP, please select
Dynamic IP.
Static IP: Please fill in the parameters provided by your ISP.
After configuration, please click Next.
12
e. PPTP
Enter the Server IP Address, User Name, and Password provided by your ISP
PPTP(PP Tunneling Protocol) provides two address modes.
Dynamic IP: If the PPTP offered by your ISP is Dynamic IP, please select
Dynamic IP.
Static IP: Please fill in the parameters provided by your ISP.
After configuration, please click Next.
13
3. Click Apply and reboot ZSR4134WE, or select Reboot in System Tools of
the left menu and click Reboot the router button.
4. While rebooting, please wait for few minutes and DO NOT power off.
5. Select Network Status of the left menu to find out the current network and
system information.
14
Loading...