Zonet ZPS2102 user manual
[Setup procedure for Windows 95/98/Me]
Step1: Please check the packing list:
a. One Print Server.
b. One external AC power adapter.
c. One setup CD. (For Windows 95/98/Me/NT/2000/XP).
d. One user’s manual (included quick guide).
Step2: Setup procedure that Print Server connect to Printer:
a. Turn off the printer’s power.
b. Use the USB cable to connect printer server with your printer.
c. Plug UTP line and power adapter.
d. Done.
Step3: Install protocol in Windows 95/98/Me:
a. Please make sure what protocol that you need, we could use IPX/SPX . TCP/IP . NetBEUI in
Windows 95/98/Me.
b. If it needs to add new protocol, the procedure is: Select Control Panel Æ Select Network(1) Æ
Select Add(2) Æ Select Protocol(3) Æ Select Microsoft from the Manufacture list(4) Æ Select
one protocol what you need(5) Æ Done.
Step4: Install driver for Print Server in Windows 95/98/Me:
a. Insert CD and execute setup.exe.
b. It will appear two utilities, one is Network Print Monitor, and the other is PSAdmin.
c. Done.
Step5: Add new Printer’s driver:
If it was a new printer type, please select [add printer] and complete this procedure.
Setup procedure as below:
a. Select Local Printer.
b. Select the appropriate printer manufacturer.
c. Select printer type.
d. Select LPT1.
e. Type printer name or use default.
f. In print test page, select “No”.
g. Done.
Step6: Configure print server:
a. Select printer name what you want.
b. Select “Properties”.
c. Select “Details”.
d. Select “Add Port”.
e. In “Other”, select “Network Print Port”.
1
f. It will appear a picture as below.
g. Select Print Server. (If there are two print servers in your LAN, please confirm it’s Node ID and
h. Done.
select port)
2
[Setup procedure for Windows NT]
Step1: Please check the packing list:
Please see step1 of setup procedure for Windows 95/98/Me.
Step2: Setup procedure that Print Server connect to Printer:
Please see step2 ofsetup procedure for Windows 95/98/Me.
Step3: Install protocol in Windows NT:
a. Please make sure what protocol that you need, we could use IPX/SPX、TCP/IP、NetBEUI in
Windows NT.
b. If it needs to add new protocol, the procedure as below: Select control panel Æ Select
network(1) Æ Select add(2) Æ Select protocol and select add(3) Æ Select one protocol what
you need(4) Æ Done.
Step4: Install driver for Print Server in Windows NT:
a. Insert CD and execute setup.exe.
b. It will appear two utilities, one is Network Print Monitor, and the other is PSAdmin.
c. Done.
Step5: Add new Printer’s driver:
If it was a new printer type, please select 【add printer】and complete this procedure.
Setup procedure as below:
a. Select local printer.
b. The Add Printer Wizard screen will appear, Select My Computer.
c. In available ports, select LPT1.
d. Select the appropriate printer manufacturer.
e. Select printer type.
f. Type printer name or use default.
g. In Printer sharing, click next.
h. In printing testing page, select “No”.
i. Done.
Step6: Configure print server:
a. Select Printer that you want to configure.
b. Select “Properties”.
c. Select “Port”.
d. Select “Add port”.
e. In available ports, select “Network Print Port”.
f. It will appear picture as below.
3
Loading...