Package Contents
•
One ZFS3308E
•
One Quick Installation Guide
•
One Power Adapter
•
Four Rubber Pads
Contact your local authorized reseller or the store purchased from for
any items damaged and/or missing.
Application
Steady
Network cable connected and connection
Flash
Front Panel
LED Status Operation
PWR Steady Power is ON
1~8
Data packets are transmitting
Rear Panel
Item Name Description
DC Power connector, connects to power adapter
1~8 RJ-45 ports 1 to 8
IInnssttaallllaattiioonn
1 Connect the provided
power adapter to the
Power connector of the
ZFS3308E
2 Connect your network
devices to the RJ-45
ports of the ZFS3308E
with UTP/STP Category
3/4/5 cables
CCaauuttiioonn
•
The switch must put on a surface that is able to hold at least 5kgs
weight
•
Power adapter must be connected to the switch properly and
securely
•
Suggested at least 10cm empty space around the unit for sufficient
ventilation and cooling
•
Do not recommend to put any items on top of the switch
•
ZFS3308E is not ideally to work in a high electromagnetic
environment, under direct sunlight, dust and vibrating surfaces
•
Maximum distance between the switch and the end node is 100
meters
•
Must use an unshielded or shielded twisted-pair (UTP/STP)
Category 5 or better cables to ensure proper transmission
•
Loss of data packet may encounter when using cable other than
Category 5
TTrroouubblleesshhoooottiinngg
1. Check the power adapter and power wall-jet to make sure they are
function properly. Check if the switch is turned-ON and power LED
is steady.
2. Check all cable connections between computer and the switch to
make sure they are connected properly.
3. Maximum distance is 100 meters from the switch to end nodes.
4. Link LED(s) is ON/flashing at the connected port(s) of the switch.
5. Test your computer’s network adapter to make sure it is installed
and functioned properly.
6. Check issues such as network collisions, domain limitations, and
other physical installation aspects. Make sure they all meet IEEE
standard network installation requirements, more details can be
found at www.ieee.org.
7. If problem still persists, write down your software/hardware
configuration and LED error indications and contact your local
retailer or the store purchased for further assistance.
8. If the provided power adapter is missing, purchase 9V / 700mA
power adapter for replacement.
Loading...