Zonet ZFS3228E INSTALLATION GUIDE

88--PPoorrtt G

Giiggaabbiitt SS

ZFS3228E

wiittcchh

w

Quick Installation Guide

Green

Features

‧

Plug & Play

‧

Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x standards

‧

NWAY Auto-negotiation support, Auto-Sense the transmission speed, half/full duplex

‧

8 ports 10/100/1000M Auto-Sense, Auto-MDI/MDIX

‧

Adopt IEEE802.3x flow control for full-duplex and backpressure for half-duplex

‧

Non-blocking wire-speed transfer

‧

Adopt store and forward structure

‧

MAC address auto learning

‧

Support IEEE802.3x for broadcasting storm control

Package Contents

‧

One 8-Port Gigabit Switch

‧

One Quick Installation Guide

‧

One Power Adapter

‧

Four rubber pad

Front Panel

‧

LED lights panel

LED Status Operation

Power Green Lit: Power is on

10/100M Link Green

Full Duplex

Green

(FDX/COL)

1000M Link/Act

Lit: Indicates a 10/100M device is connected
Flash: the port is transmitting/receiving data
Not lit: Indicates

Lit: Indicates
Flash: the port is
Not lit: Indicates
Lit: Indicates a 1000M device is connected
Flash: the port is transmitting/receiving data

Not lit: Indicates

there’s a 10M device or no device connected

this port is working under

working under half duplex mode

this port is working under

there’s a 10/100M device or no device connected

full duplex mode

half duplex mode

Rear Panel

‧

RJ45 ports

Side Panel

‧

Ventilation and cooling holes
Please make sure there is no substance block up these holes, and leave enough space at the two side of
the switch, so the switch can have a proper ventilation and cooling to avoid high heat inside the switch,
which may cause improper working of the system.