Zonet ZFM5621CF, ZFM5621MT INSTALLATION GUIDE

Quick Installation Guide

Package Contents

One 56K/V.92 FAX MODEM

One Quick Installation Guide

One RJ-11 cable

One Installation CD

System Requirements

˙PⅡ

with 200 MHz CPU or better

Operating System : Windows 98SE/ME/2000/XP/Vista

32MB RAM

2MB or more hard disk space

Hardware Installation

a. Make sure that your PC is powered off. Unplug the power cord from the wall socket. Also turn

off all other peripherals you may have attached to your PC. b. Open your PC case and locate an available PCI on the motherboard. c. Slide the modem into the PCI slot. Make sure that all of its pins are touching the slot’s contacts.

You may have to apply a bit of pressure to slide the modem all the way in. after the modem

is firmly in place, secure its fastening tab to your PC’s chassis with a mounting screw. Then

close your PC. d. Plug one end of the phone cable into the Line jack on your fax modem. The other end of the

phone cable should be connected directly to the phone outlet. e. Power on your PC

Software Installation

For Windows Vista

a. The operating system will install all necessary driver files when modem installed. After

approximately 1 minute, a message will appear at the lower right-hand corner “Your new hardware is now installed and can be used.” The hardware and software installation is completed.

For Windows 98SE/ME/2000/XP

a. Insert the Installation CD into the CD-ROM drive and select the path: Modem Card/

Motorola/Windows_SM56_6.12.05_DFV/ssetup.exe to install the driver you need. This will

install all necessary files from the Installation CD.

b. The installation will be completed after clicking Finish button.

12-086-00594 Rev:02