Zonet ZEN3301E INSTALLATION GUIDE

Gigabit Ethernet PCI Adapter

Quick Installation Guide

PPaacckkaaggee

• 1 Gigabit Ethernet PCI Adapter

• 1 Quick Installation Guide

• 1 CD with Driver

HHaarrddwwaarree IInnssttaallllaattiioonn

To insert the PCI adapter into your PC, follow the steps bellow:

1. Turn off the computer and remove its cover.

2. Insert the adapter into a PCI slot.

3. Lock this adapter to the rear of the computer and put back the computer cover.

4. Connect the adapter to network using twisted-pair cable.

SSooffttwwaarree IInnssttaallllaattiioonn ffoorr WWiinnddoowwss 22000000//XXPP//VViissttaa

1. After turn-ON the computer, the hardware will be detected automatically. The operating

2. If your computer does not detect and/or install the driver files automatically, please insert the

system will install all necessary driver files for the hardware. After approximately 1 minute, a
message will appear at the lower right-hand corner “Your new hardware is now installed and
can be used.” The hardware and software installation is completed.

Installation CD into your CD-ROM drive and double-click the setup program, SETUP.exe. This
will install all necessary files from the Installation CD for you.

12-086-00708 Rev:01