Zonet ZEN1220E INSTALLATION GUIDE

Gigabit Notebook Express Card

Quick Installation Guide

PPaacckkaaggee

• 1 Gigabit Notebook ExpressCard

• 1 Quick Installation Guide

• 1 CD with Driver

DDrriivveerr IInnssttaallllaattiioonn ffoorr WWiinnddoowwss 22000000//XXPP//VViissttaa

1. The operating system will install all necessary driver files when an ExpressCard is plugged into
your notebook computer’s ExpressCard slot. After approximately 1 minute, a message will appear
at the lower right-hand corner “Your new hardware is now installed and can be used.” The
hardware and software installation is completed.

2. If your computer does not detect and/or install the driver files automatically, please insert the
Installation CD into your CD-ROM drive and select the path to install the driver you need. This will
install all necessary files from the Installation CD.

LLEEDD IInnddiiccaattoorrss

LED Status Operation

Lit: Indicates a valid connection

Link/Act Blue

Flash: Indicates there’s data transmitting/receiving

10/100M Green

1000M Red

Lit: Indicates a 10/100M device is connected

Lit: Indicates a 1000M device is connected

12-086-00812 Rev:00