Digital Video Security Systems
3D-DNR DAY & NIGHT COLOR CAMERA
Anti-Vandal & Water-Resistant
3D-DNR DAY & NIGHT CAMERA
R255VDIR/G
R255VDIR/W
USER MANUAL
3-DNR
OSD
Camera
Digital Video Security Systems
3D-DNR DAY & NIGHT COLOR CAMERA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
This installation should be made by a qualified service person and
should conform to all local codes.
CAUTION : To prevent electric shock and risk of fire hazards:
☞Do NOT use power sources other than those specified.
☞Do NOT expose this appliance to rain or moisture.
Digital Video Security Systems
3D-DNR DAY & NIGHT COLOR CAMERA
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Do not install or use the camera in an
environment where the humidity is high.
Do not drop the camera or subject
it to physical shocks.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Never keep the camera pointed
directly at strong light.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful
to provide ventilation whenoperating
under high temperatures.
This is one of the most important parts
of the camera. Be careful not to leave
fingerprints on the lens cover.
Do not install or use the camera in an
environment where the humidity is
high.
It can cause malfunctions to occur.
If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Severe lighting change or flicker can
cause the camera to work improperly.
Resistant from external strong impact,
pressure, shock, dust or explosion.
This camera has been designed as
weatherproof with IP66 certication.
It has a high strength and and durable
exterior material of Die Cast Aluminum
body and Polycarbonate dome.
This camera can be installed at anywhere
even exterior places.
Digital Video Security Systems
- 1 -
3D-DNR DAY & NIGHT COLOR CAMERA
Contents
Contents
1
2
3
5
4
6
7
30
Specification
How to Install
About 3D - DNR
Installation
Sefety Instructions
General Features
Trouble Shooting
Menu Set Up
▶
Menu Set Up
▶
Lens Set Up
▶
Exposure
▶
Back Light
▶
D-WDR
▶
White Bal.
▶
Day & Night
▶
3DNR
▶
Special
▶
Adjust
▶
Reset
▶
Exit
◈
Camera Title
◈
D - Effect
◈
Motion
◈
Privacy
◈
Sync
◈
Return
8
8
28
11
29
12
29
14
17
18
19
20
21
21
24
26
27
28
28
Digital Video Security Systems
- 2 -
3D-DNR DAY & NIGHT COLOR CAMERA
About D-WDR/BLC/ 3D DNR
DNR DSP Chip
DNR
DSP Chip
DNR
DSP Chip
Privacy
Masking
Mirror
CCD Defect
Compensation
AE/AWB/AF
Sens-Up
Noise
Reduction
Motion
Detection
OSD IC
CPU
(16 Bit)
DNR
SDRAM
Line Lock
(Digital)
Resolution
Horizontal
DSP
DNR
550
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
DNR DSP Chip
DNR
DSP Chip
DNR
DSP Chip
Privacy
Masking
Mirror
CCD Defect
Compensation
AE/AWB/AF
Sens-Up
Noise
Reduction
Motion
Detection
OSD IC
CPU
(16 Bit)
DNR
SDRAM
Line Lock
(Digital)
Resolution
Horizontal
DSP
DNR
550
Backlight
Compensation
BLC
3D-DNR
Digital
Reduction
Noise
DNR
SDRAM
Line Lock
DSP
DNR
Backlight
Compensation
BLC
D-WDR(Digital Wide Dynamic Range)
550TV Lines
High Spotlight BLC Function
3D Filtering Method of Newly
Advanced DNR Function
D-WDR is a powerful and ultra advanced technology
that captures cleaner and superior high Resolution pictures even where images appear dark because there is
a strong back light present.
The combination of a Sony Super HAD CCD image sensor and DNR DSP provides an excellent resolution of
550 TV lines.
Newly developed 3D filtering enhances Digital Noise
reduction at low light levels. 3D Filtering of the Video
Signal Optimises the Signal to Noise ratio, giving vastly
improved low light visivility and a powerful Sens-Up
function (up to 258 times magnification).
High Spotlight BLC Function is Especially Effective to
Read the Number Plate of the Vehicles in the Street or
Parking Lot at Night Time. Especially Users Can Adjust
and Select the Special Required Area to Observe the
Target Object Under the Strong Spots of Light Exist.
Digital WDR OFF
3D-DNR OFF
Normal BLC
Standard Camera
Digital WDR ON
3D-DNR ON
HS BLC
550TV Lines Camera
550TV Lines 3D-DNR
OSD Control Digital Zoom
HS BLC Digital WDR
1. LENS
2. EXPOSURE
3. WHITE BAL
4. DAY NIGHT
5. 3DNR
6. SPECIAL
7. ADJUST
8. RESET
9. EXIT
SETUP
DC
ATB
COLOR
OFF
SHUTTER
BRIGHTNESS
AGC
SENS-UP
BLC
D-WDR
RETURN
EXPOSURE
1 / 60
48
HIGH
AUTO
OFF
OFF
RET
1. CAM TITLE
2. D-EFFECT
3. MOTION
4. PRIVACY
5. SYNC
6. LANGUAGE
7. RETURN
SPECIAL
OFF
OFF
OFF
INT
ENGLISH
RET
-
1/3” Sony Super HAD CCD
-
Up-Most High Resolution :
Color - 550TV Line / B/W - 600TV Lines
- Built-In Next Generation 3D DNR with 3D Filter
-
Max. Sens-Up (x258), 0.00001 Lux of Min. Illumination
- Convenient OSD control function
- x32 Digital Zoom
- Free Area Selectable function of BLC and MD
- Privacy Color Masking for 8 Area selection
- Camera OSD control
- ICR-IR Infrared Cut Filter Removable(Option)
- Max 70% of Disk Saving Effect with Super DNR
- Negative Image Function
- Digital Wide Dynamic Range Function(D-WDR)
- Dual Power(AC 24V / DC 12V)
DNR DSP Chip
DNR
DSP Chip
DNR
DSP Chip
Privacy
Masking
Mirror
CCD Defect
Compensation
AE/AWB/AF
Sens-Up
Noise
Reduction
Motion
Detection
OSD IC
CPU
(16 Bit)
DNR
SDRAM
Line Lock
(Digital)
DAY & NIGHT
Resolution
Horizontal
DSP
0.00001 Lux
Illumination
Minimum
DNR
550
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
Illumination
With an Incredibly Minimum Illumination of Amazing
0.00001Lux can Capture Good Images Even in
Extremely Low Light Conditions and Related Noises
are Significantly Reduced by the Ultra Advanced
DNR(Digital Noise Reduction) Technology.
Standard Image
Minimum Illumination Image
GENERAL FEATURES
Digital Video Security Systems
- 3 -
3D-DNR DAY & NIGHT COLOR CAMERA
Specication
550TV Lines
DC Auto Iris Varifocal
Lens(2.8mm-12mm)
True Day/Night Capability
ICR-IR Cut Filter Removable
850nm IR LEDs * 33pcs
IP 66
DC 12V / 24V AC( Dual Power)
SPECIFICATIONS
MODEL
R255VDIR/G R255VDIR/W
GENERAL FEATURES
* 1/3" Sony Super HAD CCD
*
Built-In Next Generaltion 3D DNR with 3D Filter
* Third-Generation DSP Chip
* True Day & Night (ICR-IR Cut Filter Removable)
*
Max. 258X Sens-Up, 0.00001 Lux of Maximum Illumination
* x32 Digital Zoom
*
D-WDR(Digital Wide Dynamic Range)
*
Vivid Sharp Picture in completely darkness
*
DC Auto Iris Varifocal Lens(4mm-9mm),
(3.5mm-16mm)-Option
* DC 12V / 24V AC - Dual Power
Sensor
Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S. D
Backlight
Resolution
S/N (Y signal)
Min. Illumination
White Balance
Electronic Shutter Speed
Sense-Up
Gain Control
3 DNR
D-WDR
Motion Detection
Privacy
Mirror
Freeze
Sharpness
D&N Selection
Digital Zoom
Blemish Compensation
Power
Power Consumption
Lens
Operating Temperature/Humidity
Storage Temperature/Humidity
Dimension
Weight
1/3" SONY Super HAD CCD
NTSC=811(H) * 508(V) / PAL=795(H) * 595(V)
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)
2:1 Interlace
Internal / Line Lock
Available
BLC / HSBLC / Off Selectable
550TV Lines(Color), 600TV Lines(B/W)
52dB (AGC Off, Weight On)
0.000006Lux(IR LED ON)
ATW / AWB / Manual / AWC →SET
AUTO (1/50sec, 1/60sec ~ 1/120,000sec)
Off / Auto(Selectable limit *2 ~ *258)
High, Middle, Low, Off Selectable
Off/On (1~50 Level Adjustable)
Indoor / Outdoor / Off
On/Off (4 Zone, Alarm Output)
On/Off (8 Zone)
Off / Mirror / V-Rev / Rotate
On/Off
0~31’(Level Adjustable)
Color /BW /Auto
On(*32) / Off
256 Point (Even 128 Point, ODD 128 Point)
DC 12V / 24V AC - Dual Power
CDS ON:450mA Max
DC Auto Iris Varifocal Lens(2.8mm-12mm)
-10˚C ~ +50˚C. RH 95% Max.
-20˚C ~ +60˚C. RH 95% Max.
140mm(W) * 100mm(H) * 140mm(D)
900g
x258
550
Digital Video Security Systems
- 4 -
3D-DNR DAY & NIGHT COLOR CAMERA
Installation
OSD
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATB
COLOR
OFF
x258
550
x258
550
True Day & Night
(ICR-IR Cut Filter Removable)
OSD Control Board
SETTINGS
Settings can be made using the OSD button
located on the bottom of the camera.
SET UP MENU DEFAULT SET MENU
LENS
EXPOSURE
WHITE BAL.
DAY / NIGHT.
3D-DNR
SPECIAL
ADJUST
RESET
EXIT
DC
SHUTTER
BRIGHTNESS
AGC: --SENS-UP
BLC
D-WDR
RETURN
SHARPNESS
BLUE
RED
RETURN
ATW
AUTO/B/W COLOR/EXT
ON
Refer to the next page
FACTORY
DC : LEVEL (0 ~100 Adjustable)
ON (RANGE : 0 ~100 Level Selectable) / OFF
Save the SETUP Menu and exit
SHUTTER : FLK/ 1/60 / 1/250, 1/500, 1/2000, 1/5000,
1/10000, 1/100000
BRIGHTNESS ----AGC : OFF / LOW / MIDDLE/ HIGH
SENS-UP : x2~ x258 Level Selectable
BLC : OFF / BLC (GAIN : LOW, MIDDLE, HIGH/ DEFAULT :
LEFT/RIGHT, WIDTH, TOP/
BOTTOM, HEIGHT, RTURN) /
HSBLC (LEVEL : RANGE 1~8 Selectable/ DEFAULT :
LEFT/RIGHT, WIDTH, TOP/BOTTOM,
HEIGHT, RETURN)
D-WDR : OFF / INDOOR/ OUTDOOR
RETURN
ATW/ AWB/ MANUAL(R Gain : 0 ~100 Level Selectable,
B Gain : 0 ~100 Level Selectable)
/ AWC SET
SHARPNESS : (RANGE : 0 ~ 31 Level Adjustable)
BLUE : (RANGE : 0 ~ 100 Level Adjustable)
RED : (RANGE : 0 ~ 100 Level Adjustable)
RETURN
COLOR
AUTO : DELAY (0~63) / S-LEVEL(0~100)/ E-LEVEL(0~100)
RESET
Digital Video Security Systems
- 5 -
3D-DNR DAY & NIGHT COLOR CAMERA
How To Install
* Camera Adjustment
① Connect Video & Power Line (DC 12V/ AC 24V Regulated Power)
② Position the camera for the correct angle of view.
③ Loosen the locking screws and focus the camera.
④ Re-tighten the locking screws.
* Portable connector for easy installation of the camera.
- A portable monitor can be connected to the camera,
allowing the operator to easily adjust camera angles
and settings locally during installation.
C
able Connectio
n
P
ower jac
k
Vid
eo Jac
k
P
ower (+
)
P
ower (-
)
V
ideo Signal
V
ideo GN
D
x258
x258
550
Digital Video Security Systems
- 6 -
3D-DNR DAY & NIGHT COLOR CAMERA
Safety Instructions
Precautions for use
Please read this manual thoroughly before using the camera to become familiar with the
correct operational procedures.
Cautions When Using
Do not open the camera body and touch any electrical parts to avoid possible electric shocks.
Do not insert objects into the camera body to prevent fire hazards and electric shock.
Do not touch the camera with wet hands to avoid electric shock.
Do not disconnect the power cord from a power plug when still connected to the outlet.
Always disconnect the power by removing the plug from the power socket.
lf the camera emits a burning smell, immediately disconnect it from the power source and
report the problem to your distributor.
Cautions When Install
Only apply power after installation of the product.
Do not install the camera in a position facing directly at a strong light source.
Do not install or use the camera in areas of high humidity.
Do not install near any cooling or heating equipment.
Do not install the camera in dusty environments.
Do not install the camera in places where the camera is subjected to physical shocks.
This products must be used with a regulated DC 12V or AC 24V adaptor for power.
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
☞
Digital Video Security Systems
- 7 -
3D-DNR DAY & NIGHT COLOR CAMERA
General Features
D-WDR (Digital Wide Dynamic Range)
The DWDR range of camera use very advanced D-WDR technology, which
gives clear images even where the scene is strongly backlit. Selectable sensitivity
indoor and outdoor
550 TV Lines
The combination of a Sony Super HAD CCD image sensor and 3DNR DSP provides
an excellent resolution of 550 TV lines.
Day & Night
Depending on luminance levels the camera switches automatically between colour and
monochrome. The camera’s IR cut-filter gives perfect colour rendition during the day.
Illumination
3DNR technology has solved the problem of ghosting and now displays clearer, superior,
high resolution images even in extremely low light conditions.
3DNR DSP Chip
The DNR DSP chipset has various powerful functions that give superior high resolution Day & Night images. it
removes the camera noise and Sens-Up provides quality images at very low luminance levels. The most advanced
technology is combined on a single DSP chipset, resulting in enhanced surveilance images.
Disk Saving Effects
Advanced 3DNR technology improves picture quality and saves hard drive space, as less
noise means much smaller file sizes - much smaller than standard CCTV camera images.
Additional Functions
OSD - On Screen Display menu with multi-Language support.
Privacy Masking - 8 zones, Sens-Up - x128 times, Digital Zoom - x36
☞
☞
☞
☞
☞
☞
☞
3D-DNR
Digital
Reduction
Noise
Resolution
Horizontal
DSP
3D-DNR
550
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
OSD
3D-DNR
Digital
Reduction
Noise
Resolution
Horizontal
DSP
3D-DNR
550
Backlight
Compensation
BLC
OSD
3D-DNR
Digital
Reduction
Noise
DAY & NIGHT
Resolution
Horizontal
DSP
3D-DNR
550
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
OSD
DISK SAVING
Digital Image Stabilizer
3D-DNR
Digital
Reduction
Noise
DAY & NIGHT
Resolution
Horizontal
DSP
0.00006 Lux
Illumination
Minimum
3D-DNR
550
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
OSD
3D-DNR
Digital
Reduction
Noise
DSP
3D-DNR
OSD
DISK SAVING
DNR
Digital
Reduction
Noise
OSD
Digital Video Security Systems
- 8 -
3D-DNR DAY & NIGHT COLOR CAMERA
SET UP MENU DEFAULT SET MENU
LENS
EXPOSURE
WHITE BAL.
DAY / NIGHT.
3D-DNR
SPECIAL
ADJUST
RESET
EXIT
DC
SHUTTER
BRIGHTNESS
AGC: --SENS-UP
BLC
D-WDR
RETURN
SHARPNESS
BLUE
RED
RETURN
ATW
AUTO/B/W COLOR/EXT
ON
Refer to the next page
FACTORY
DC : LEVEL (0 ~100 Adjustable)
ON (RANGE : 0 ~100 Level Selectable) / OFF
Save the SETUP Menu and exit
SHUTTER : FLK/ 1/60 / 1/250, 1/500, 1/2000, 1/5000,
1/10000, 1/100000
BRIGHTNESS ----AGC : OFF / LOW / MIDDLE/ HIGH
SENS-UP : x2~ x258 Level Selectable
BLC : OFF / BLC (GAIN : LOW, MIDDLE, HIGH/ DEFAULT :
LEFT/RIGHT, WIDTH, TOP/
BOTTOM, HEIGHT, RTURN) /
HSBLC (LEVEL : RANGE 1~8 Selectable/ DEFAULT :
LEFT/RIGHT, WIDTH, TOP/BOTTOM,
HEIGHT, RETURN)
D-WDR : OFF / INDOOR/ OUTDOOR
RETURN
ATW/ AWB/ MANUAL(R Gain : 0 ~100 Level Selectable,
B Gain : 0 ~100 Level Selectable)
/ AWC SET
SHARPNESS : (RANGE : 0 ~ 31 Level Adjustable)
BLUE : (RANGE : 0 ~ 100 Level Adjustable)
RED : (RANGE : 0 ~ 100 Level Adjustable)
RETURN
COLOR
AUTO : DELAY (0~63) / S-LEVEL(0~100)/ E-LEVEL(0~100)
RESET
Menu Set-Up
OSD
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY NIGHT
5.3DNR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATB
COLOR
OFF
P
ower jac
k
Vid
eo Jac
k
P
ower (+
)
P
ower (-
)
V
ideo Signal
V
ideo GN
D
P
ower jac
k
Vid
eo Jac
k
P
ower (+
)
P
ower (-
)
V
ideo Signal
V
ideo GN
D
True Day & Night
(ICR-IR Cut Filter Removable)
OSD Control Board
SETTINGS
Settings can be made using the OSD buttons
Located on the bottom of the camera.
Digital Video Security Systems
- 9 -
3D-DNR DAY & NIGHT COLOR CAMERA
SPECIAL MENU DEFAULT SET MENU
CAMERA TITLE OFF
D - EFFECT ON
MOTION ON
PRIVACY ON
SYNC INT
RETUEN
ON / OFF
END
FREEZE / MIRROR/ D-ZOOM/ GAMMA/ NEG. IMAGE
AREA SELECT : AREA 1
AREA DISPLAY : ON / OFF
LEFT / RIGHT : 0 ~ 100 Level Adjustable
WIDTH : 0 ~ 100 Level Adjustable
TOP / BOTTOM : 0 ~ 100 Level Adjustable
HEIGHT : 0 ~ 100 Level Adjustable
SENSITIVITY : 0 ~ 40 Level Adjustable
RETURN
AREA SELECT : AREA 1
AREA DISPLAY : ON / OFF
LEFT / RIGHT : 0 ~ 100 Level Adjustable
WIDTH : 0 ~ 100 Level Adjustable
TOP / BOTTOM : 0 ~ 100 Level Adjustable
HEIGHT : 0 ~ 100 Level Adjustable
COLOR : Selectable in 15 Color
RETURN
Special Menu
Digital Video Security Systems
- 10 -
3D-DNR DAY & NIGHT COLOR CAMERA
Menu items can be selected by using the OSD buttons of the camera
1. Press the Set Up button.
* The Set Up menu will be displayed on the monitor.
2. Move and select the required function using the Up and Down button.
* Move the arrow indicator Up or Down to select the desired feature by pressing
the Up or Down button.
SETUP
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
COLOR
ON
DC
ATW
COLOR
ON
Menu Set Up
Digital Video Security Systems
- 11 -
3D-DNR DAY & NIGHT COLOR CAMERA
3. Changing menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After completing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
1. Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen.
2. Select the desired lens type by pressing the Left or Right button.
NOTE
* Move to the available submenu by moving arrow to desired feature.
* Submenu is not available when this symbol is display "- - - -"
Lens
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
COLOR
ON
DC:DC Auto Iris Lens
Digital Video Security Systems
- 12 -
3D-DNR DAY & NIGHT COLOR CAMERA
3. Press the RETURN to return to the SETUP menu.
NOTE
* When DC is selected, the brightness can be adjusted. The brightness control
range is 1 ~ 100.
Lens
BRIGHTNESS
RETURN
100
This function is used to select Automatic or Manual shutter speed control.
1. On the Set Up menu screen select EXPOSURE by using the Up or Down button.
2. Select the desired shutter mode by pressing the Left or Right button.
* FLK : Select FLK mode when flickering occurs; caused by the unmatched frequency of electric lights.
Exposure
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
COLOR
ON
Digital Video Security Systems
- 13 -
3D-DNR DAY & NIGHT COLOR CAMERA
EXPOSURE
SENS-UP
SHUTTER
BRIGHTNESS
SENS-UP
BLC
D-WDR
RETURN
SENS-UP
RETURN
FLK
- - - HIGH
AUTO
BLC
OFF
x 2
NOTE
* To produce better results with FLK, do not use it in conjunction with the WDR
mode in the BACKLIGHT menu.
* Desired shutter speed can be selected by user 1/60, 1/250, 1/500, 1/2000, 1/5000,
1/0000, 1/100000, FLK .
* Brightness just can operate when selected the Manual mode(Option), When
selected DC mode, brightness will be disabled .
* AGC(AUTO GAIN CONTROL):
A higher gain increases brightness but also increases any noise.
OFF : Deactivates the AGC function
LOW : Allows automatic gain control to LOW.
MIDDLE : Allows automatic gain control to MIDDLE.
HIGH : Allows automatic gain control to HIGH
* SENS - UP:
At night and/or in dark conditions, the Sens-Up mode can be selected desired value from x2 ~ x258.
* FLK : Select FLK mode when flickering occurs; caused by the unmatched frequency of electric lights.
Digital Video Security Systems
- 14 -
3D-DNR DAY & NIGHT COLOR CAMERA
* OFF : BLC function does not operate.
* BLC : Users can select and define a specific area in a scene, and view the area clearly.
* HSBLC : When there are simultaneous brightness & dark image areas HSBLC makes both distinct.
* RETURN:
Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.
NOTE
* Pressing the SET button in AUTO mode allows adjustment of image brightness
by increasing or decreasing the shutter speed (x2 ~x258).
* The higher the level, the brighter the image becomes, but it is possible that an
after image (ghosting) could appear.
* When SENS-UP is activated the increased magnification can induce noise and
pixelation; this is quite normal.
Back Light(BLC)
This camera provides intelligent light level control to overcome even strong backlight conditions.
1. Move the allow indicator to BACKLIGHT using the Up or Down button on the SETUP menu screen.
2. Select the desired level by using the Left or Right button.
EXPOSURE
SHUTTER
BRIGHTNESS
AGC
SENS-UP
BLC
D-WDR
RETURN
1/60
- - - LOW
- - - -
BLC
OFF
Digital Video Security Systems
- 15 -
3D-DNR DAY & NIGHT COLOR CAMERA
3. Select a mode using the Left and Right buttons then press the SET button.
Select BLC to adjust the desired BLC area and GAIN level.
① Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
② Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
③ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.
* GAIN : Adjust the BLC sensitivity by selecting LOW, MIDDLE or HIGH.
* DEFAULT : Press the Default to back to the factory default when input the wrong data .
BLC ON BLC OFF
BLC
GAIN
DEFAULT
LEFT / RIGHT
WIDTH
TOP / BOTTOM
HEIGHT
RETURN
LOW
7
8
7
8
Digital Video Security Systems
- 16 -
3D-DNR DAY & NIGHT COLOR CAMERA
4. Select HSBLC(High Suppress Backlight Compensation) by using the Left and Right buttons then press the
Set Up button to set up the desired HSBLC area and GAIN level.
* Move the arrow indicator to RETURN and press the Set Up button after complete the BLC area set to
return to EXPOSURE menu.
* LEVEL : Adjust the HSBLC sensitivity by selecting between 0~8.
* DEFAULT : Press the Default to return to the factory default when input the wrong data .
HSBLC OFF HSBLC ON
① Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
HSBLC
LEVEL
DEFAULT
LEFT / RIGHT
WIDTH
TOP / BOTTOM
HEIGHT
RETURN
8
7
8
7
8
② Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right
button from 0 ~ 7 cells.
③ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.
Digital Video Security Systems
- 17 -
3D-DNR DAY & NIGHT COLOR CAMERA
D-WDR(digital WDR)
This camera provides intelligent light level control to overcome even strong backlight conditions.
1. Move the allow indicator to D-WDR using the Up or Down button on the EXPOSURE menu screen.
2. Select the desired feature by using the Left or Right button.
EXPOSURE
SHUTTER
BRIGHTNESS
AGC
SENS-UP
BLC
D-WDR
RETURN
1/60
- - - LOW
- - - BLC
OFF
* D-WDR : When there are simultaneous brightness & dark image areas WDR makes both distinct and can
be selected desired feature between OUTDOOR and INDOOR.
* OFF : D-WDR function does not operate.
* RETURN: Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.
Digital Video Security Systems
- 18 -
3D-DNR DAY & NIGHT COLOR CAMERA
White Balance
The White Balance function is used to control the “on-screen” colours.
1. Move the allow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the Left or Right button.
* There are three user selectable White Balance settings available.
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
COLOR
ON
* ATW : (Auto Tracking White Balance)
Normal setting; when the colour temperature range is from 1,800˚K to 10,500˚K. (Ex: a fluorescent lamp or outdoors)
* AWB : The White Balance is automatically adjusted in a specific environment.
* AWC → SET : To obtain the best results press the SET button while the camera is focused onto white
paper. If the environment, and/or light source changes, the White Balance will require re-adjustment.
* MANUAL : Used for fine adjustment of White Balance. Set White Balance first using ATW or AWC then
change to MANUAL and press SETUP button. Increase or decrease the value of R-Gain(Red) and
B-Gain(Blue) while monitoring the colour of the image.
WHITE BAL MANUAL
BLUE
RED
RETURN
- - - - - - - -100
- - - - - - - -100
Digital Video Security Systems
- 19 -
3D-DNR DAY & NIGHT COLOR CAMERA
Day / Night
Picture can be displayed in either colour of black and white.
1. Select DAY / NIGHT using the Up or Down button on the SETUP menu screen.
2. Select the desired mode using the Left and Right buttons.
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
COLOR
ON
* COLOUR : The picture is always displayed in colour.
* AWB : The White Balance is automatically adjusted in a specific environment.
* AUTO : The mode is automatically switches to COLOUR in normal conditions and switches to B/W mode
when ambient illumination is low. To set the switching time or speed in AUTO mode, press the SET button.
DAY NIGHT AUTO
DELAY
S - LEVEL
E - LEVEL
RETURN
- - - - - - - - 63
- - - - - - - -100
- - - - - - - -100
Digital Video Security Systems
- 20 -
3D-DNR DAY & NIGHT COLOR CAMERA
3. Select the desired mode and set the values by using the Left or Right button .
3DNR is used to reduce the level of background noise in a low luminance environment.
* DELAY : The range can be adjusted between 0 ~ 63.
* S - LEVEL : The start level can be adjusted between 0 ~ 100.
* E - LEVEL : The end level can be adjusted between 0 ~ 100.
1. Move the arrow indicator to 3DNR by using the Up and Down button.
2. Select whether or not to activate 3DNR by using the Left and Right buttons.
* ON: Activates 3DNR - Digial noise reduction can be adjusted between 0 ~ 100.
* OFF: Deactivates 3DNR - noise is not reduced.
* Select RETURN by using the Up or Down button to return to Set Up menu.
3DNR
3DNR
LEVEL
RETURN
- - - - - - - -100
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
COLOR
ON
Digital Video Security Systems
- 21 -
3D-DNR DAY & NIGHT COLOR CAMERA
Special
1. When the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons.
2. Select one of the mode using the Up and Down button.
1. CAM TITLE : When input, the Camera ID is displayed on the monitor.
1-1) Move the arrow indicator to CAMERA ID using the Up or Down button on the SETUP menu screen.
1-2) Set to ON using the Left or Right button.
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
COLOR
ON
SPECIAL
1. CAM TITLE OFF
2. D - EFFECT
3. MOTION OFF
4. PRIVACY OFF
5. SYNC OFF
6. RETURN
OFF
OFF
OFF
OFF
Digital Video Security Systems
- 22 -
3D-DNR DAY & NIGHT COLOR CAMERA
3) Press the SETUP button.
CAMERA TITLE
CAMERA TITLE
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
▷ → ← ↑ ↓ ( ) -
ㅡ _□ / = & : ~ , .
← →
CLR POS END
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
▷ → ← ↑ ↓ ( ) -
ㅡ _□ / = & : ~ , .
← →
CLR POS END
NOTE
* When CAMERA TITLE is set to OFF, the CAMERA TITLE is not displayed on the monitor.
1-4) The CAMERA TITLE can be up to 15 alphanumeric characters in length.
① Move the cursor to choose an alphanumeric character.
② Choose a character in displayed range A~Z, a~z, 0~9 using the Up, Down, Left and Right buttons.
③ Select the desired character by pressing the SETUP button.
- The cursor moves to the next position, after character input, by pressing the SETUP button.
④ Repeat the above steps until the Camera ID has been created.
Digital Video Security Systems
- 23 -
3D-DNR DAY & NIGHT COLOR CAMERA
NOTE
* In cases where the wrong Camera ID has been input........
Move the cursor to CLR and press SETUP button to erase characters from left to
right, and repeat the above steps to input the characters again.
1-5) To select the position where the Camera ID should be displayed on the screen.
① Move the cursor to POS and press the SET button.
CAMERA TITLE
0123456789
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
▷ → ← ↑ ↓ ( ) -
ㅡ _□ / = & : ~ , .
← →
CLR POS END
② Created camera ID is displayed.
(Factory default position)
CAM1
Digital Video Security Systems
- 24 -
3D-DNR DAY & NIGHT COLOR CAMERA
③ Select a new position by using the four
directional button, Press the SET button to
confirm the position.
CAM1
2) D - EFFECT
Move the cursor to D-EFFECT and press the SET button to set the other image functions.
2 -1) FREEZE : Image freezing or moving Image
SPECIAL
D-EFFECT
1. CAM TITLE OFF
2. D - EFFECT
3. MOTION OFF
4. PRIVACY OFF
5. SYNC OFF
6. RETURN
1. FREEZE
2. MIRROR
3. D-ZOOM
4. GAMMA
5. NEG. IMAGE
6. RETURN
OFF
OFF
OFF
OFF
OFF
V-FLIP
OFF
0.45
OFF
Digital Video Security Systems
- 25 -
3D-DNR DAY & NIGHT COLOR CAMERA
2 -2) MIRROR : Flip the image horizontally on the screen.
3) D - ZOOM: Digital zoom available, range x1 ~ x32.
PAN : The pan range can be controlled between -10 ~ + 100
TILT : The pan range can be controlled between -10 ~ + 100
* V-FLIP : Flip the image vertically on the screen.
* ROTATE : Flip the horizontal image vertically on the screen.
* OFF : Disabled.
D-EFFECT
D-ZOOM
1. FREEZE
2. MIRROR
3. D-ZOOM
4. GAMMA
5. NEG. IMAGE
6. RETURN
D-ZOOM
PAN
TILT
RETURN
OFF
V-FLIP
OFF
0.45
OFF
x 2.6
MIRROR ON MIRROR OFF
20
20
Digital Video Security Systems
- 26 -
3D-DNR DAY & NIGHT COLOR CAMERA
NOTE
* PAN and TILT function should be available when using the digital zoom.
2-4) GAMMA : Desired gamma values can be adjusted between 0.05 ~ 1.00.
2-5) NEG. IMAGE :
ON : Activates negative image just like film
OFF : Normal image
2-6) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu.
3. MOTION
3-1) When the special menu screen is displayed, use the Up or Down botton to access the MOTION menu.
① AREA SELECT : Determines whether the MD area selected AREA 1, 2, 3, 4.
② Move the arrow indicator to select the HEIGHT of cells to increase or decrease by using the Left / Right
button between the level 0 ~ 100.
③ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.
④ Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right
button between the level 0 ~ 100.
MOTION
AREA SELECT
AREA DISPLAY
LEFT / RIGHT
WIDTH
TOP / BOTTOM
HEIGHT
SENSITIVITY
RETURN
AREA
ON
100
100
100
100
40
Digital Video Security Systems
- 27 -
3D-DNR DAY & NIGHT COLOR CAMERA
⑤ Move the arrow indicator to select the SENSITIVITY to increase or decrease by using the Left / Right
button between the level 0 ~ 40.
RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu.
4. PRIVACY
Hide an area you want to hide on the screen.
4-1). When the SPECIAL menu screen is displayed, press the Up and Down buttons to set to PRIVACY.
4-2). Set up the area mode using the 4 direction buttons.
① AREA SELECT : You can select up to 8 MD area.
② AREA DISPLAY : OFF : Disabled
ON : Activates area display
SPECIAL
1. CAM TITLE OFF
2. D - EFFECT
3. MOTION OFF
4. PRIVACY OFF
5. SYNC OFF
6. RETURN
ON
OFF
ON
OFF
PRIVACY
AREA SELECT
AREA DISPLAY
LEFT / RIGHT
WIDTH
TOP / BOTTOM
HEIGHT
COLOR
RETURN
AREA
ON
100
100
100
100
40
Digital Video Security Systems
- 28 -
3D-DNR DAY & NIGHT COLOR CAMERA
③ Move the arrow indicator to WIDTH to make desired width of cells to increase or decrease by using the
Left / Right button between the level 0 ~ 100.
④ Move the arrow indicator to HEIGHT to make desired height of cells to increase or decrease by using the
Left / Right button between the level 0 ~ 100.
⑤ Move the arrow indicator to the LEFT / RIGHT and TOP / BOTTOM to select the desired area positon by
using the LEFT or RIGHT button.
⑥ Move the arrow indicator to COLOR to select the desired color of each area cells by using the Left / Right
button between the 15 different color.
RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu.
5) SYNC : INT (Internal Synchronisation)
Move the arrow indicator to RETURN after complete the setup to return to SETUP menu.
ADJUST
1. When the SETUP menu screen is displayed, select ADJUST using the Up and Down buttons.
SETUP
LENS
EXPOSURE
WHITE BAL
DAY / NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DC
ATW
COLOR
ON
Digital Video Security Systems
- 29 -
3D-DNR DAY & NIGHT COLOR CAMERA
2. Select the desired mode by using Up or Down button..
SHARPNESS : Improving image clarity. The level can be adjusted to obtain an improved image. However,
when the level is set too high it can distort the image or cause noise.
* Select BLUE or RED to increase or decrease the value of R-Gain(RED) and B-Gain(BLUE) while monitoring
the color of the image.
RETURN :Move the arrow indicator to RETURN after complete the setup to return to SETUP menu.
RESET
Resets the camera settings to the factory defaults.
EXIT
Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu.
ADJUST
SHARPNESS
BLUE
RED
RETURN
- - - - - - - -100
- - - - - - - -100
- - - - - - - -100
Digital Video Security Systems
- 30 -
3D-DNR DAY & NIGHT COLOR CAMERA
Trouble Shooting
PROBLEM
Northing appears on
the screen.
☞
Check the power cable, power supply output and video
connection between the camera and monitor.
☞
Are the camera lens or the lens glass dirty?
Clean the lens / glass with a soft clean cloth.
☞
Adjust the monitor controls, as required.
☞
If the camera is facing a very strong light, change
the camera position.
☞
Adjust the lens focus.
☞
Adjust the contrast control of the monitor.
☞
If there is an intermediate device, correctly set the 75Ω/Hi-z.
☞
Has MOTION DET been set to ON in the menu?
☞
Has MD AREA been properly dened?
☞
Check that the AGC setting in the EXPOSURE menu is’t set to OFF.
☞
Check the EXPOSURE menu and make sure SHUTTER is set to------.
☞
Make sure that the camera isn’t facing direct sunlight or
uorescent lighting. If necessary,change the camera position.
☞
Check the settings in WHITE BALANCE menu.
☞
Check the camera is correctly connected to an appropriate
regulated power source.
The image on the
screen is dim.
The camera is not
working properly
and the surface of
the camera is hot.
The image on the
screen is dark.
Motion Detection
is not activated.
The color of the
picture is not correct.
The image on the
screen ickers.
The SENS-UP does
not work.
POSSIBLE CAUSE
Digital Video Security Systems
- 31 -
3D-DNR DAY & NIGHT COLOR CAMERA
-MEMO-
Digital Video Security Systems
- 32 -
3D-DNR DAY & NIGHT COLOR CAMERA
-MEMO-
T.S. MICRO TECH INC.
17109 Gale Ave City of Industry,
CA 91745, U.S.A.
TEL : +626 839 8998
Loading...