Znyx Networks ZX222 User Manual

NetBlaster ZX222 User’s Guide
Fast Ethernet Adapter for PCI Mezzanine Connector (PMC)
ZNYX Networks 48501 Warm Springs Blvd., Suite 107 Fremont, CA 94539 USA
Telephone: (510) 249-0800 or (800) 724-0911 Fax: (510) 656-2460 Email: sales@znyx.com support@znyx.com Website: www.znyx.com
NetBlaster ZX222 User's Guide
Document # DC0124-01
June 23, 2000 Version
© 2000 ZNYX Networks. All rights reserved worldwide. Information in this document is subject to change without prior notice. ZNYX Networks, RAIN, RAINlink and NetBlaster are trademarks or registered trademarks of ZNYX Networks in the United States and/or other countries. All other marks, trademarks or service marks are the property of their respective owners.
ZNYX Networks may have patents, pending patent applications, trademarks, copyrights or other intellectual property rights covered in the subject matter of this document. By furnishing this document, ZNYX Networks does not license nor waive its license to those intellectual property rights except as expressly provided in a written license agreement from ZNYX Networks. Information in this document is subject to change without prior notice.
Welcome!
Thank you for choosing the ZNYX Networks NetBlaster embedded PCI Mezzanine Card (PMC) Fast Ethernet Adapter. Your adapter is designed to provide a lifetime of superior service in your system with PMC slots.
NetBlaster PMC Fast Ethernet Adapter Models
NetBlaster PMC ZX222 provides two 100BaseFX ports with SC 62.5/125 micron
multimode fiber connectors. It is a single-wide PMC module.
Documentation and Software
Documentation and software for the NetBlaster PMC adapter is distributed electronically. You can retrieve documentation and drivers from the ZNYX Networks web site in the driver download section. Please contact ZNYX Networks Customer Support if you have trouble locating the appropriate driver or installation documentation.
Installation Procedure
There are two basic steps you need to follow before you can operate your NetBlaster adapter.
1. Install the NetBlaster adapter (hardware)
2. Install the driver.
The steps outlined here help you install and troubleshoot the hardware. Driver installation instructions are available along with the driver itself from the ZNYX Networks web site. To get the most recent operating system specific driver, go to the ZNYX Networks website or contact Technical Support at:
Telephone: (510) 249-0800 or (800) 724-0911 Fax: (510) 656-2460 Email: support@znyx.com Website: www.znyx.com/drivers
Loading...
+ 6 hidden pages