ZMODO ZP-KC1H04-P User Manual

Zviewer for iOS 1.0 User Manual

Zviewer For iOS 1.0

User Manual

----------------------------------------------------------------------------------------------------------------------

Zviewer for iOS 1.0 User Manual

Contents

1 Software Installation................................................................................................................3

1.1 Introduction...................................................................................................................3

1.2 Environmental requirements.........................................................................................3

1.3 Installation Steps...........................................................................................................3

2 Operation instruction................................................................................................................3

2.1 Opening Program..........................................................................................................3

2.2 Managing Device..........................................................................................................4

2.3 Playing Video................................................................................................................8

2.4 Switching Devices...................................................................................................... 12

2.5 Switching Channels.................................................................................................... 12

2.6 Switching Display Modes...........................................................................................13

2.7 PTZ Control................................................................................................................ 14

2.8 Image Capture.............................................................................................................15

Zviewer for iOS 1.0 User Manual

1 Software Installation

1.1 Introduction

Zviewer for iOS is the mobile app used to stream live video from your ZMODO H.264

DVR or IP Network camera, and supports a four channel simultaneous view. This guide focuses

on the installation and use of the application.

1.2 Environmental requirements

Hardware: iPhone® mobile phone or iPod® touch.,

System: iOS4.3 or higher

Network: WIFI or GPRS

1.3 Installation Steps

Enter the iTunes App Store and download the Zviewer application.

2 Operation instruction

2.1 Opening Program

1) Locate the Zviewer application and tap to launch. Once the application loads, you will see

the main interface.

Zviewer for iOS 1.0 User Manual

Start

2.2 Managing Device

From the main interface, tap the SETTING button on the toolbar, and select Device manage

(See Setting) to enter device management interface (See Devices).

Zviewer for iOS 1.0 User Manual

Setting Devices

1) Add device. In the device management interface (See Devices), tap ADD button on the

toolbar, and enter the Add Device interface (See Add). The SAVE button will be enabled

if all the required items are entered. Tap SAVE button to save and go back to the device

management interface (See Devices).

Zviewer for iOS 1.0 User Manual

Add

2) Delete device. On the device management interface (See Devices), tap EDIT button on

the toolbar or swipe one row of the list (See Delete02) to delete one device.

Zviewer for iOS 1.0 User Manual

Delete01 Delete02

3) Revising device information. From the device management interface (See Devices), tap

the desired device, and make your changes (See Edit). Tap DONE button on the toolbar to

save, or tap the DEVICES button to exit without saving.

Zviewer for iOS 1.0 User Manual

Edit

2.3 Playing Video

1) Tap any square box; a red border will appear around the channel when chosen (See

Select).

Zviewer for iOS 1.0 User Manual

Select

2) Tap the PLAY button. If the channel’s video player does not connect to a device, you will

see a popup requesting a device selection (See Select Device). Select desired device to

connect.

Zviewer for iOS 1.0 User Manual

Select Device

3) From the Select Channel menu, tap the channel you would like to play (See Select

Channel).

Zviewer for iOS 1.0 User Manual

Select Channel

4) If the device information is correct, your video will start playing (See Play).

Zviewer for iOS 1.0 User Manual

Play

2.4 Switching Devices

From the main interface, tap SETTINGS button on the toolbar and select the Device Connect

button (or long press the square box) to enter the Select Device interface. The rest of the steps will

be the same as the steps listed in Section 2.3.

2.5 Switching Channels

1) Tap on the CH button at the bottom of the toolbar to reveal the change channel panel (See

Channel 1);

2) Select the desired channel you to play.

3) Tap the CH button again to hide the CH panel.

Zviewer for iOS 1.0 User Manual

Channel 1 After switch

2.6 Switching Display Modes

1) Double tap the video window to switch between single channel and four channel videos;

2) To switch between Portrait and Landscape modes, orient your phone horizontally or

vertically (See Portrait, Landscape).

Zviewer for iOS 1.0 User Manual

Portrait

Landscape

2.7 PTZ Control

1) On the main interface, the bottom toolbar is above the PTZ control panel (See PTZ);

2) The PTZ control panel from the first row order: return to normal toolbar, tilt up, pan left,

zoom in, aperture increase, focal length increase; The PTZ control panel second row order:

tilt down, pan right, zoom out, aperture decrease, focal length decrease. Click the PTZ

button bottom toolbar can hide the PTZ panel.

Zviewer for iOS 1.0 User Manual

PTZ

2.8 Image

Capture

In portrait mode,

select a video, and tap the

SCREENSHOT button

at the bottom of the toolbar.

Save the file to the

photo directory of the

system.

Capture