ZMODO ZK8-I11123BK User Manual

Download

Page 1

IPCAM User Manual

Wireless/Wired

Wireless/Wired Network

Night

Night Vision

Vision

Vision &

User

User Manual

Network

Network Camera

Remote

& Remote

Remote Operation

Manual

Operation

Camera

Page 2

IPCAM User Manual

Thank you for buying our IP camera.

This Series Products are designed and equipped for network video surveillance system, including wired IP bullet camera, wireless IP bullet camera, IP IR dome camera, IP IR waterproof camera etc. We adopt high performance chip to ensure high quality media processor which processes audio and video collection, compression and transmission. Standard MJPEG compression format ensures clear and streaming video performance. It enables users to view via IE browser, centre management software client software;

AJ series product s are applicable for big, medium-sized and small enterprises, chain store, factory, home and all kinds of spots where remote network video transmission and control supposed to be installed, They are easy to install and operate. Before the installation of the IP camera, please check if your product accessories in the package are complete

Product

Product Components

IP camera ---------------------------------------------------------------------------------1 PC Bracket （ optional ） ------------------------------------------------------------------- -1 PC Power adapter ----------------------------------------------------------------------------1 PC Warranty card-----------------------------------------------------------------------------1 PC CD------------------------------------------------------------------------------------------1 PC

1. General Introduction ...........................................................................................4

1.1. Product Specifications ................................................................................. ...5

1.2. Applications ................................................................................................ .... 5

1.3. System Requirements ...................................................................................... 5

2 . Interface & Installation ................................................................................. ..... 6

2.1. Interface ..........................................................................................................7

2.2. Installation ....................................................................................................... 8

2.2.1. Installation in LAN ....................................................................................... 8

2.2.2. PPPoE Installation ........................................................................................9

2.2.3. IP Camera & PC connection ......................................................................... 9

3. IE Browse to IP Camera..................................................................... ...............10

3.1. Use IP Finder Software .................................................................................. .11

Components

Components and

Table

Table of

and

and Features

of CONTENTS

Features

Features :

CONTENTS

Page 3

IPCAM User Manual

3.1.1. Configure Network Parameter .....................................................................12

3.2. Logging and Active X Installation...................................................................1 4

3.3. Main Operation Interface ................................................................................. 16

3.4. Operator Operation .........................................................................................1 7

3. 4 . 1 . Multi-Device Settings....................................................................... ...........1 8

3. 4 . 2 . Basic Network Settings......................................................................... ....... 20

3. 4 . 3 . Wireless Settings................................................................. ......................... 21

3. 4 . 4 . ADSL Settings.............................................................................. ............... 21

3. 4 . 5 . DDNS Settings.................................................... ......................................... 22

3. 4 . 6 . E-mail and FTP Services Settings.................................................... ............ 22

3. 4 . 7 . Alarm Services Settings ............................................................................... 23

3. 4 . 8 . Reset//Firmware Upgrade Settings............................................................... 24

3. 4.9 . Restore Factory Settings .............................................................................. 24

3. 4 .1 0 . Reboot Equipment Settings.......................................................................... 24

4 . Others ..................................................................................................................2 5

4.1. Port Forwarding Settings in Router ................................................................... 25

4.2 Warranty ............................................................................................................ 26

Page 4

IPCAM User Manual

General

General Introduction

IP Camera is a new generation product with the combination of analog camera & IP video technology. Despite all functions which analog cameras have, IP camera can compress and encrypt video and audio signal then send it to remote terminals through internet with its built-in processor and web server. With its IP address, users can use standard PC IE browser to visit IP camera, real time monitor targets, manage and store video or image, PTZ control also is available through network.

As a new member in camera family, IP camera shares the same operation function with the analog camera, such as, auto white balance, auto shutter speed, AGC, auto backlight compensation etc. On the other hand, IP camera supports remote access through internet, and support multi-user visit, some IP cameras are able to extend to both analog and digital signal.

The core of F series IP cameras is 32Bit RSIC, adopts standard MJPEG compression format, camera sensor is CMOS, support auto white balance and backlight balance, support IE, cell phone browser

management. In general, according to the function of audio simplex & duplex, infrared, wired, wireless, POE, PZT, local storage, it has hundreds of products, to meet requirements of high, middle, low ranks of users .

Introduction

centralized monitor interface

，

Page 5

IPCAM User Manual

1.1.

Product

1.1.

Product

1.1.

1.1. Product

Product Specifications

Specifications

*- Adopt high Performance, strong function media processor 32Bit RSIC *- High sensor CMOS *-Adopt optimized MJPEG video compression algorithm, realize high-definition images transmission in narrow bandwidth; *-Maximum support 15 users viewing at the same time, no limit for users if using Forwarder Server function; *- Built in Web Server ， it is convenient for users to use standard browse to realize the real time monitoring and setting administration;

*-Support WIFI ： 802 ． 11b/g wireless networking; *-Support remote system update; *-Support DDNS analysis, support LAN & Internet (ADSL 、 Cable Modem) *-Support variety of network protocol: TCP/IP, UDP, SMTP, PPPoE, Dynamic DNS, DNS Client, SNTP, BOOTP, DHCP, FTP, SNMP, WIFI/802. 11b/g *-Parts of modes products support one/ two way audio talkback; *-Support Motion Detection alarm function (set area & sensitivity); *-Support image snap *-Abnormal automatic recovery function

if Network Interruption can auto connection

，

*-Dynamic alarm function, set alarm period .

1.2.

Applications

1.2.

Applications

1.2.

1.2. Applications

Applications

The series products usually are ideal for big department, supermarket, home, factory, workshop etc.

1.3.

System

1.3.

System

1.3.

1.3. System

System Requirements

Requirements

Minimum Hardware Configuration

Page 6

IPCAM User Manual

CPU: Pentium 1.6 GHz Memory: 256MB Audio card: need audio monitor, two way talkback essential Hard Disk : if it need video image ， no less favorable than 40G

Operation System: 32 bit simple/ English Windows2000 、 WindowsXP 、 Windows2003 、 Windows Vista & 64 bit simple Chinese/English Windows2003 、 Windows XP

Windows Vista etc.

、

Software environment IE 5.0 or above version DirectX8.0 or above version TCP ／ IP network protocol

2. Interface & Installation

There are two kinds of AJ series IP camera interfaces: one is body guard interface, the other is the extend line interface, set two representative products as examples, to give explanation:

* Non-extended line IP Camera icon * Extended line IP Camera icon

Page 7

IPCAM User Manual

2.1. Interface

* Non-extended line IP Camera Tailgate

Power Supply Light: constant on after power up Network light: constant sparkle after power up data transmission. Ethernet interface: RJ-45 interface. I/O interface: 1 router alarm input, accept 3, 4 two terminals (input terminal grounding, low level effective trigger); 1 router TTL control input, connect 1,2 two terminals (1,2 terminals short connections). Power input interface: connect direct current 5V Power

* Extension line interface definition icon:

Page 8

IPCAM User Manual

Power: direct current 12V. GPIO alarm interface: accept external connection linkage alarm equipment (for example: door magnet, infrared) Reset line: two reset line short circuit, equipments restore to ex- factory standards. Ethernet interface: RJ-45 network interface. Backup: follow-up product extend interface.

About GPIO alarm interface (S terminal) definition:

1# +DC12V 2# RS485 （ A ）

3# Earth （ GND ）

4# IO2 （ OUT PUT ） 5# RS485

（

）

6# IO1 （ IN PUT ） GND: Ground ， alarm input ground ，

RS485 ground

RS485: RS485 control interface ， left

connection RS485 negative right connection RS485 positive. connect P/T decoder support variety P/T protocol.

2.2. Installation

IP camera process image transmission on network through the use of Internet Technology, it offers DDNS function for static IP, dynamic IP, PPPoE dialing users. IP Camera can connect to outer net through LAN, also connect directly.3 networking connecting ways are widely applied in IP Camera:

2.2.1. Installation in LAN.

This is the most popular network access way, as long as there is a router, internet cable connect router directly to IP Camera, IP Camera can connect to Internet as normal PC, as shows:

，

Page 9

IPCAM User Manual

2.2.2. PPP o E Installation

Under the condition, users need set PPPoE dialing parameter on IP Camera: input the username and password ISP supplier ’ offer permit IP Camera dialing connects to Internet. As to set the PPPoE dialing parameter, you can connect device to network through the first way, then write parameter to the device, also through following third way, direct process parameter written to device. The way how to set PPPoE, please refer to 3.4.5.for detailed steps

2.2.3. IP Camera & PC connection

This method is not used too often, when you process machine write parameter or program shift, we recommend you adopt the first connect network way, to process the modification of machine parameter.

connect to IP camera (note: don ’ t apply for wrong power), after one minute

Page 10

IPCAM User Manual

modification of IP camera, video could be connected by internet cable to IP camera; under the normal condition, yellow light is on, green light flickers, now physical connection of IP camera finish at this time (in order to connect successfully, we advise to set camera IP as the stable IP at the same net range of PC in LAN , how to set, please refer to 8 frequent questions answer).

Browse

3. IE

camera via PC, first please run the relative software in the CD kit

3.1.

3.1. Use

and appear the following interface:

Browse

IE Browse

Browse to

After IP camera connects to PC LAN through router, you can operate on IP

Use

Use IP

IP Finder

Open the disk, double click icon (the IP Finder software),

to IP

Finder

Finder Software

Camera

IP Camera

Camera

Software

Click Next

Next , complete the installation

Page 11

IPCAM User Manual

Note

Note : Before using the product installation, please just use IPCAM standard

power adapter. The use of non-certified power adapter may damage the IPCAM. IPCAM should only be installed in the indoor environment

After you finished install the IP Finder software, You will finder that

icon in your computer program. double click icon. The IP Finder is run.

Figure3.1

If the internet cable power connect is correct, after click button it appears device styles, name, and IP address in the list, (if it doesn ’ t appear, please confirm power & internet cable work normally).

Figure3.2

Page 12

IPCAM User Manual

Figure3.3

Note

Note : After click search button the software will automatically search for all the

devices ’ IP address within a local area network. . There are three cases:

1 IP cameras ’ IP address not found. After click search button devices ’ IP address

did not showing in the software ’ s list: e.g . Figure3.1

2 IP camera ’ s IP address being found, but the IP Camera ’ s network segment not

as same as the local IP address ’ . In that way,first you should change the IP Camera ’ s network segment as same as the local IP address ’ . You can change

3.1.1

this following 3.1.1 local computer ’ s IP address is :192.168.0.15.But the device ’ s IP address is:

192.168.1.99.You need change the device ’ s IP address:192.168.1.99 to:192.168.0.99)

3 IP cameras ’ IP address being found. A nd the device ’ s network segment as

same as the local IP address ’ . A nd all devices are listed in software ’ s list:

3.1.1

3.1.1 Configure

Configure

Configure Network

Network

Network Parameter

Parameter

Parameter e.g. Figure3.4 (e.g. The

Note:

1. If it needs manual modify camera name, HTTP interface, IP address, sub-net mask, gateway, main DNS server, backup DNS server, etc. please click apply after modification, enter IP camera username and password, click confirm is OK.

2 . Inner visit address is LAN visit address; outer visit address is WAN visit address.

3.1.1

3.1.1 Configure

box, then you can configure the devices ’ network parameters O n this page.

Configure

Configure Network

First select the device ’ s IP address. right-click to open the network configuration dialog

Network

Network Parameter

Parameter

Page 13

IPCAM User Manual

Figure3.4

NOTE:

NOTE: IP

Address

IP Address

Address :

: Fill in IP address, ensure that the IP address ’ network segment you

have filled as same as the PC network segment.

Mask

Mask :

: Use the default subnet mask e.g. : 255.255.255.0

Gateway

Gateway : DNS:

DNS:

DNS: DNS service provider ’ s IP address . Port

Port

Port : User

User

User and

: Ensure that the device ’ s network gateway as same as your PC ’ s.

: Device provides HTTP services, port, usually 80

and

password:

and

password:

and password:

password: The default administrator account is admin password is

blank

DHCP

U se

se DHCP

DHCP Device uses Dynamic Host Configuration Protocol, if enabled device

each time you start will be from a DHCP server (typically a router or modem ) to obtain IP addresses , or require users to manually set the IP address of.

Type the correct user name and password (user must have administrator privileges) update system firmware with the Web UI firmware

Page 14

IPCAM User Manual

Logging

3. 2

2 .

. Logging

Logging and

Before IE monitoring through web, it is necessary to install video plug-in, installation

mode as below:

Open disk, find that icon. double clic k the icon. process installation, Click the next step to until finish.

There are two way to logging IP camera

1) Double-click the device ’ IP address in the list of IP Finder . (Figure 3.2). IE will automatically open and display the device ’ s login screen. 2 ) Access directly through IE by directly input the device IP address in the IE browser ’ s address bar, For example: Figure3.6

and

Active

and

Active

and Active

Active X

installation

X installation

installation

Figure3.6

When the item connects to outer networking, a log-in interface will appear . For example: Figure3.7

Page 15

IPCAM User Manual

Figure3.7 enter log in information, click OK to enter, an installation pop-up will appear : e.g. Figure3.7

Select the needed language, and the way you want to visit. Click Sign in. after installation Active X you can use it. If it is blocked and requires plug-in installation by antivirus software, please remove block .

Figure3.8

Page 16

IPCAM User Manual

Note

Note ：

admin

1. Default device account is admin

Main

3. 3

3 .

. Main

Main Operation

Operation

Operation Interface

admin

admin ， no password.

Interface

For example: If the is a bright , indicating the device is the first way to monitor the status . When you log on the operator interface, you can perform PTZ and video parameters

Direction

Direction control:

appropriate direction of rotation

1. Image mirror indicates a reverse image.

2. Resolution, mode, brightness, contrast default setting are ： 320*240 、 50HZ 、 6 、 4 、 mode is mainly for the adjustment of Light strength, please adjust to 60HZ

when light is poor or in dark.

3. There are 3 browse modes in IE mode: visitor, operator, administrator, the authority

control:

control: Click the arrows in different directions can be the lens to the

Vertical cruise Level cruise

Figure3.9

Page 17

IPCAM User Manual

of administrator is the highest, log in different authorities, the operation will be different. Regarding to 3 user authorities, please refer to 3.4.4. Equipment User Administration .

If you want to see 4-way,or 9-way ， you can click the icon or

OSD

OSD : In the video display date and time. You can disable the OSD function or choose the

color of OSD.

Snapshot

Snapshot Photo:

Video:

Video: Click icon to enter the recording mode, the icon becomes ， again, click

the end of the recording.

3. 4

4 .

setting interface. Device Information: You can see the device serial number, equipment systems and device firmware version of the application firmware version of the.

Alias

Alias setting Date&Time

Date&Time

Date&Time set Uer

Uer

Uer settings

the user name, password, as well as in their packet (administrator, operator, visitor).

� V � O

� A

UPnP

UPnP set

successful UPnP.

Device

Device Firmware

and application of

Restore

Restore factory

occurred, you can restore the factory settings to resolve the device.

rebooted

I rebooted

rebooted the

Back:

Back: Return to monitor mode

Photo:

Photo: Click the icon interception photo.

Manager

. Manager

Manager Operation

When you logged on as Administrator, click on “ Administrator action ” to enter

setting

setting :

settings

settings :

isitor

V isitor

isitor :

perator

O perator

perator :

brightness, contrast and other parameter .

dministrator

A dministrator

dministrator :

set

set :

: If you want internet access IPCAM, to ensure that the state is

Firmware

Firmware Upgrade:

factory

factory settings

Operation

: You can set your favorite device aliases.

set

set :

: seting the date and time.

: Can be set up to 8 users. On this page you can set up accounts of

: In this mode, you can only visit.

: You can set the direction of the lens device, set the video screen ’ s

: You can set the device advanced configuration.

Upgrade:

Upgrade: The system firmware update the device firmware

settings

settings :

the

device

the

device

the device

device :

: When there is not a response when the error

: I rebooted the device.

3.4.1

3.4.1 Multi-Device

� Add a local area network equipment

Multi-Device

Multi-Device Settings

Settings

Page 18

IPCAM User Manual

I n the multi-device configuration page, you can see all the equipment inside the LAN. The first device is the default device. You can add more devices listed in the list of equipment. Embedded applications, up to 4 devices at the same time-line. Click the “ second road equipment ” and double-click “ Current list of devices in the LAN ” in the device entry name, host address, Http port will automatically be filled, require the user to fill in the correct account name and password, click “ Add . ” Repeat this process you can continue to add devices. Finally do not forget to click on the “ Settings ” button.

Figure3.10

�

Add

�

Add

�

� Add

Add a

device

a device

device on

the

on the

the internet

internet

F irst, make sure you want to add devices to access via IP address or domain name. For example:http://202.96.133.134: 9008 or http://IPcam.dyndns.org:9008 .

HttpPort

And then fill in host address: 202.96.133.134 HttpPort

Http

port

Http

IPcam.dyndns.org Http

port

Http port

port : 9008. and fill in the correct account name and

HttpPort

HttpPort : 9008 or host address:

password to the last click on “ Add. ” Repeat the above steps can add other devices

Page 19

IPCAM User Manual

Figure3.11

3.4.2

3.4.2 Basic

This sector is for DHCP and IP configuration choose to set IP address gateway,

DNS server, Http port;

Basic

Basic Network

Network

Network Settings

，

Settings

Figure3.12

please fill in the relative IP address

port forwarding is needed, If you

，

subnet mask,

、

Page 20

IPCAM User Manual

3.4.3

3.4.3 Wireless

automatically . Then select the Wireless LAN you wanted. Then the Wireless LAN ’ s information will showing. Finally input the Wireless password and submit.

Wireless

Wireless Setting

First make sure that your wireless router is working well. Then click the

button. After you click twice. The camera will find out the Wireless LAN

Setting

Figure3.13

3.5.4

3.5.4 ADSL

need to enter fill in your ISP service providers obtain from the account name and password. Duly completed and click “ Settings ” button. Your device can connect to the internet has.

ADSL

ADSL Setting

W hen your device directly connected to the Internet via ADSL, when you

Setting

Figure3.14

Page 21

IPCAM User Manual

Dynamic

Dynamic DNS

All the above information is set up when the device is ready to deliver; users generally do not need to change. In case of any accidental loss, user needs to re-obtain the domain name, and fill it himself, juts do as the above, the user ’ s name is just the first four characters, and this is for remote access. For example, http://abcd. 88safe.com the user ’ s name is abcd. The password is DDNS. (The password can be obtained on the device body or contact the supplier). When connected, it displays "xxxxx is OK" on Device Info ; it means that it was successfully set. If you need to use your own Dynamic DNS, please select the appropriate service providers (on DDNS service) then enter the following information, then save it;.

DNS

DNS Setting(DDNS)

Setting(DDNS)

Figure3.15

3.5.6

3.5.6 E-mail

E-mail

E-mail and

and

and FTP

FTP

service

FTP service

service

service Settings

Figure3.16

Settings

Page 22

IPCAM User Manual

The above setting is a preparation for the alarm function, the sender should be

entered the sender ’ s email address ， recipient 1 、 2 、 3 、 4 is filled with recipient E-mail address ； SMTP server should be filled with the sender email SMTP server ， e.g. the sender email address is abc@163.com ， and enter mail.163.com. Generally SMTP port is 25 and SMTP password to reference ； when needs to send, please tick Email notification Internet IP address ； The e-mail server and other information can be obtained from the mail service

provider the email notification is image captured when alarming if no email notification is needed when alarming, and then no need to enter .

Set up FTP service, you can fill in parameters like following:

do no need to change

，

when needs to check, just tick it, and enter SMTP user

；

both of them are provided by Email provider

，

and test according

，

Figure3.17

The above setting is equally similar to Mail Server Settings ， when alarming is

triggered it also sends image password , FTP upload directory 、 FTP mode ， FTP mode has two options: PORT and POSV . If needs a quick upload image, then select it, edit upload image interval

（ second ）

3.5.7

3.5.7 Alarm

pleas refer to below interface ， the sensitivity of motion detection can be adjusted according to the users ′ requirement, the higher the number is, the lower sensitivity

is; Another mode is input alarm, when connected, it triggers alarm through alarm input signal which connects to linkage alarm GPIO;

with linkage alarm box through GPIO, sound the siren ； the second is email notification, send email with images captured ； the last is upload pictures alarm ， as the way mentioned before FTP upload pictures alarm, Upload pictures interval （ second ）

Alarm

Alarm Service

As shown below, there are two modes of alarm trigger, first one is motion detection,

When triggered, there are 3 alarm modes

Service

Service Settings

please enter FTP server

，

Settings

：

FTP port

、

one is IO alarm linkage, camera connects

FTP user、FTP

、

Page 23

IPCAM User Manual

keeps consiste nt with the mentioned upload pictures interval of Ftp service settings. The schedule refers to arming time ， as the selected time interval ： 0 ： 00 minute per

week to 0 ： 45 minutes and Monday 1 ： 00 hour and 2 ： 00 hour

Figure3.18

Reset/Firm

Reset/Firm Ware

This sector is for camera firmware upgrade, it includes device system firmware

Be cautious to apply for it!

Restore

Restore Factory

Ware

Ware Upgrade

Factory

Factory Settings

Upgrade

and device application firmware .

Settings

Figure3.19

When users forget password, we can restore ex-factory settings, when click, a picture will pop up, Click ok, and wait for 1 minute and you can use it normally. User setting feature restores

Page 24

IPCAM User Manual

Reboot

Reboot Equipment

Click restart, it appears the above picture, click ok, wait for 1 minute and you

can use it normally

Equipment

Others

4. Others

Others

4.1

4.1 Port

brands routes have different name, but the operation is the same. Take the TP-LINK TD-8840 router port mapping setting as example. To set up IP Camera as an example: router inner web IP is 192.168.1.1, IP camera inner web

Port

Port Forwarding

When a remote access via internet visit, port forwarding in router is a must, different

Forwarding

Forwarding Settings

Settings

Settings in

router

in router

router

Page 25

IPCAM User Manual

address is 192.168.1.50, and port is 80.

1. First log in router web administration interface.

2. Click in front of left side “ Advanced Setup

3. Click “ virtual server ” in the unfolded menu.

port

start

port

4. fill “ 80 ” under the right port "192.168.1.50", protocol select "TCP/UDP"OR ” “ TCP ” , finally don ’ t forget click under “ "save/apply ”

1. DLINK ex-factory definition router address is 192.168.0.1

2. Linksys ex-factory definition router address is 192.168.1.1

3. 3com ex-factory definition router address is 192.168.2.1

4. Microsoft ex-factory definition router address is 192.168.2.1

5. Net gear ex-factory definition router address is 192.168.1.1

6. Asus ex-factory definition router address is 192.168.1.1

start

port start

start or port

port

port end

end

Server

end

Server

end , Server

Server IP

address

IP address

address fill

4.2

4.2 Warranty

Warranty

Under normal use condition, products resulting from its own failures in the

Page 26

IPCAM User Manual

warranty period will be free maintenance . Warranty Terms as following:

a) Charge-free maintenance of the product is one year . We can repair it for free

during the guarantee period (Damages not caused by misuse or vandalism). Repair over guarantee period, we will charge maintenance fee.

b) During guarantee period, breakdown caused by misuse or other reasons out of range of warranty. You could ask repair depend on the card. We only charge for changed components, the maintenance charge is free.

c) When the products need maintenance, hand up the card with products to the manufacture or local distributor.

d) Take apart item crust, tear up the sealing label privately, this is out of warranty range.

e) We do not accept the damaged item due to modification or add other functions. The Following Circumstances will not be free warranty

a) Period check, maintenance or change components due to normal attrition. b) The damages due to crash, extrusion, artificial flooding, moisture or other

personal reasons.

c) The damages due to floods, fire, lightning strike and other natural calamities

or force majeure incidents factors

d) Repaired item by non-authorized repair centers.

All above terms, if changed, regarded to relevant regulations.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

ZMODO ZK8-I11123BK User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual