Page 1
Quick Installation Guide
Zmodo Fox IP Camera
GETTING STARTED
1
Connect a network cable
to the NET port on the
camera and the other end to
your router.
Power Adapter
Internet
Plug the power cable into
the back of the camera.
2
Connect the PC to your router.
3
CONNECTING TO YOUR CAMERA ON iOS AND ANDROID
Download and install Zmodo Zsight
software from the App store(iPhone)
or Google play (Android) or download
from website:
1
www.zmodo.com/support-software/
Tap the icon from the home screen to
open Zmodo Zsight, and click [Add],
this will take you to the “Add Device”
section.
2
Note:
If your phone can not scan QR code, please refer to Zviewer for phone (Android and iOS) Website: www.zmodo.com/support-software/
Click [Next], enter the default password
“111111”, and click [Save].
6
Package Includes
(1) Camera (1) Camera Power Adapter (1) Network Cable
(1) Desktop Stand (1) Mounting Kit (1) Quick Start Guide
Note:
1.Please make sure that router's
DHCP and UPNP are enabled before
connecting Camera.
2.The camera must be connected to your router using a network cable before
it is set up to use Wi-Fi. Your mobile device must be connected to the same
Wi-Fi network as the camera.
Select your Wi-Fi network. Enter the
Wi-Fi password, and select [Save].
5
Disconnect the network cable and place the
camera anywhere within the Wi-Fi signal range.
7
LAN
Unplug
iPhone
Android
Tap the image of QR code, then scan the QR code area on the IP camera
with your phone.
3
Select the device from the [List]
on your mobile device, and you
will be able to see the video stream.
8
Download (Website: http://www.zmodo.com/support-software/)
List Includes:
Zsight-iOS(Software)
Zsight-Android (Software)
Zviewer-Windows (Software)
Zviewer-iOS(Software)
Zviewer-Android(Software)
Zmdplayer(Software)
IPCSearch(Software)
IP Camera User Manual (PDF File)
LAN
The device will automatically enter
the Wi-Fi interface.
4
System Requirements: iPhone: iPhone v4.3 up and a valid iTunes account. Android: Android v2.3 up.
Page 2
First Method: Remote connection by adding IP Camera’s ID
Find "Setting", and click [Device Management].
2
Right click in the blank area on the right, then select [Add].
3
Launch ZViewer on your PC, enter “User Name” (Default: admin) and
“Password” (Default: 111111), then click [Login].
1
Click [Device by ID], enter ID number, and click [Next].
4
Enter “Login”(Default: admin) and “Password” (Default: 111111),
then click [Finish].
5
CONNECTING TO YOUR CAMERA ON PC
Find “Discovery”, and click [Search] on left bottom to search device.
2
Click [Add all] to add your device,you will be prompted after
successfully adding it.
3
Go back to the Live interface, right click a device name from the Device List,
then click [Open Video].
4
The video can now be seen within your local network.
5
Launch ZViewer on your PC, enter “User Name” (Default: admin) and
“Password” (Default: 111111), then click [Login].
1
Second Method: Search your LAN
Note: IP Camera and PC must be in the same LAN.
Note: IP Camera and Internet must be connected.
Follow the steps below to troubleshoot issues.
Wireless Security System
If you ever have any problems setting up or using this
product, call the TOLL-FREE number below for
additional assistance.
Telephone Service Hours: Mon-Fri 8:00am-8:00pm CST
Please go to www.zmodo.com/support-software/ to
download the installation software and user manual.
FREE
866-551-6881
1
Unable to access IP Camera by 3G or Internet
Ensure router’s hotspot is turned on.
Ensure [UPNP] is enabled on the router.
2
Unplug the power of camera, wait 10 seconds then power the
device again. The Wi-Fi function will restart.
Unable to access Internet after your device was successfully
set-up.
Go back to the Live interface, right click the device from the list, and select
"open video", the video stream will display in the first available window.
6
Install the ZViewer windows software from www.zmodo.com/support-software/. There are two ways to connect your camera on PC.
Loading...