Page 1
Outdoor IR Bullet Camera
User’s Guide
CM-S26322BG
Building NO.5, Shaer Bluesky Science and Technology Park,
Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 2
SAFETY PRECAUTIONS
CAUTION
1. Do not dr op objects on the product or apply stro ng
shock to i t. Keep away from a location subject to
excess ive vibration or magnetic interfe rence.
2. Do not in stall in a location subject to high
temper ature (over 120F), low temperature (below
-5F), or h igh humidity. Doing so may cause fire or
electr ic shock.
3. If you wa nt to relocate the already installe d
produc t, be sure to turn off the power and then
move or re install it.
4. Remov e the power plug from the outlet when the n
there is a l ightning. Neglecting to do so may cau se
fire or da mage to the product.
5. Keep ou t of direct sunlight and heat radiati on
source s. It may cause fire.
6. Insta ll it in a place with good ventilation.
7. Avoid aiming the cam era directly towards
extrem ely bright objects such as sun, as this may
damage t he CCD image sensor.
8. Appara tus shall not be exposed to dripping or
splash ing and no objects filled with liquid s, such as
vases, s hall be placed on the apparatus.
9. The Mains plug is use d as a disconnect device and
shall st ay readily operable at any time.
CAUTIO N: TO RE DUC E THE RISK OF E LEC TRI C SHO CK, DO
NOT REMO VE RE AR COVER. N O USE R SERV ICE ABL E PARTS
INSIDE . REF ER TO QU ALI FIE D SERV ICE P ERS ONNE L.
CAUTI ON
RIS K OF ELEC TRIC
SHO CK DO NOT O PEN
Thi s symbo l indic ates hi gh voltage i s pre sent insi de. I t is
dan gerous to ma ke an y kind of con tac t wit h any in sid e par t
of th is prod uct.
Thi s symbo l alert s you tha t impor tant li terat ure con cerni ng
ope ratio n and mainte nan ce has been i ncl ude d with t his
pro duct.
WARNING
1. Be sure t o use only the standard adapter that is
specif ied in the specification sheet. Usi ng any
other ad apter could cause fire, electrica l shock, or
damage t o the product
2. Incor rectly connecting the power suppl y or
replac ing battery may cause explosion, fi re,
electr ic shock, or damage to the product.
3. Do not co nnect multiple cameras to a single
adapte r. Exceeding the capacity may cause
abnorm al heat generation or fire.
4. Secur ely plug the power cord into the power
recept acle. Insecure connection may cau se fire.
5. When in stalling the camera, fasten it secu rely and
firmly. A falling camera may caus e personal injury
6. Do not pl ace conductive objects (e.g.scr ewdrivers,
coins, m etal things, etc.) or containers filled with
water on t op of the camera. Doing so may cause
person al injury due to fire, electric shock , or falling
object s.
7. Do not in stall the unit in humid, dusty, or sooty
locati ons. Doing so may cause fire or electri c
shock.
8. If any un usual smells or smoke come from the uni t,
stop usi ng the product. In such case, immediately
discon nect the power source and contact the
servic e center. Continued use in such a condit ion
may caus e fire or electric shock.
9. If this p roduct fails to operate normally, contact the
neares t service center. Never attempt to modify
this pro duct in any way. (ZMODO is not liable for
proble ms caused by unauthorized modific ations or
attemp ted repair.)
10. When c leaning, do not spray water directl y onto
parts of t he product. Doing so may cause fire or
electr ic shock.
1
Building NO.5, Shaer Bluesky Science and Technology Park,
Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 3
PRODUCT OVERVIEW
Product Overview
Main Features
1/3" Sony Color CCD Image Sensor
420 TV Lines, Horizontal
25mm Lens
Weatherproof: Yes
Signal: NTSC
Iris: Auto
Night Vision Min. Light: 0 Lux (IR On)
IR Irradiation Distance: 200’ (60m)
Operation Temperature: -5F ~ 120F
Mount: Wall
Video Connector: BNC
Power Connector: RCA 12V DC
Keep an eye on the people and places you care
about most with this color CCD bullet camera.
Featuring imaging provided by a 1/3” Sony Color
CCD, it delivers great video quality, reliable
operation, a long operating life, and p remium
performance at an affordable price. With 36 built in
IR LEDs, this camera can capture video in night
vision mode up to 200’ away. This bullet camera is
designed for indoor or outdoor use, and c an easily
be mounted for the perfect viewing angle. BNC and
RCA connections are used for video and pow er.
Installation is easy and hassle free, just plug and play.
1) CM-S26322BG Weatherproof IR Bullet Camera
1) A Card
4) Screws
1) Package Box
Package includes
Please check your camera and accessories
included in the package. Those components are
as shown below:
WWW. ZMO
D
O
.CO
M
CC
D C
A
MERA
C
CD
CA
M
ERA
W
W
W.
Z
M
O
DO
.C
O
M
CC
D
CA
ME
R
A
Camera Card
Screws Package Box
2
Building NO.5, Shaer Bluesky Science and Technology Park,
Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 4
SCHEMATIC DIAGRAM
3
1
2
Lens
LEDs
Mount Bracket
3
Building NO.5, Shaer Bluesky Science and Technology Park,
Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 5
CONNECTING CABLES
4
To connect cables
1. Connect the BNC cable to the video connector attached on your camera
2. Connect the BNC cable to the Video Input on a monitor, DVR or Video Balun.
3. Connect the power adapter to the RCA Power connector attached on your camera. When the
monitor is turned on, the camera image appears.
It is very important that you identify these ends before installing the cable so that you have the correct
ends at the correct location.
Note
BNC Cable
Monitor
RCA Cable
DVR
Vi deo Balun
Building NO.5, Shaer Bluesky Science and Technology Park,
Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 6
HOW TO INSTALL
Before installation
Please read the following instructions before installing your camera:
You have to check whether the location (ceiling or wall) can bear five times the weight of your
camera.
Do not allow the cable to be caught in a pinched area, otherwise the electric line cover may be
damaged. This may cause cable breakdown or fire.
When installing your camera, don't allow anyone to walk or stand under your installation site,
and remove all valuable items. A dropped camera may cause injury to bystanders or harm to
valuable items.
Installation procedure
To install your camera
5
Drill three small holes on the mounting location.
1
step
Note
This camera can only be mounted on the wall.
1
Building NO.5, Shaer Bluesky Science and Technology Park,
Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 7
HOW TO INSTALL
6
Last, adjust the slope of the lens by twirling the
cameras up and down, left and right to make sure
that the front of the Main Body is facing the camera’s
monitoring area.
3
step
Attach the Main Body to the mounting location
using the 4 screws supplied in your package. As
shown in the picture, push the 3 screws into the three
holes at the end of the camera Mount Bracket, then twist
them into the holes on the wall using screwdriver.
2
step
Note
There are three screws on the front end of the camera
Mount Bracket. With the screws on the two sides, you
can adjust the cameras up and down, and with the screws
under it, you can adjust the cameras left and right to make
sure that the camera is facing the monitoring area.
Building NO.5, Shaer Bluesky Science and Technology Park,
Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 8
CAMERA SPECIFICATION
Item Details
Weatherproof IR Outdoor Bullet Camera
DC 12V
NTSC Sta ndard color system PAL Standard color system
(525 Lines, 60 Fields)
(625 Lines, 50 Fields)
Approx. ?mA
1/3 inch Sony Color CCD
510(H) x 492(V), 250,920 pixels
NTSC Sta ndard PAL Standard
525 Lines 625 Lines
Internal Synchronization
420 TV Lines
0.0Lux (IR Lamps on)
36 LEDs
Visible up to 60m(200’)
1.0Vp-p, 75ohms
Focal Le ngth
Zone
Limit of Viewing Angle
25mm
Horizontal
Vertical
53°
45°
> 48dB
Auto Iris
Auto Gain Control
Auto Back Light Compensation
Auto Switching between Color and B&W by day and night change(D/N)
Beige
-5F—120F
5"x3"x2.5"
1.19 lbs
Product type
Power input
Broadcast type
Power Consumption
Image device
Effective Pixels
Scanning mode
Synchronization mode
Horizontal resolution
Minimum illumination
IR Lamps
IR Distance
Signal output
Lens
S/N Ratio
Controls
Product color
Operation temperature
Size
Weight
Mounting
Wall
Specifications for NTSC & PAL Standard
7
Building NO.5, Shaer Bluesky Science and Technology Park,
Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 9
8
This device complies with part 15of the FCC
Rules. Operation is subject to the following
two conditions:
1) This device may not cause harmful
interference.
2) This device must accept any interference
received including interference that may cause
undesired operation.
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 1 5 of FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
Note
FCC Statement
(Waste Electrical & Ele ct ro ni c
Equipment) (Applicable in the
European Union and other
European countries with
separate collection systems)
This marking shown on the product
or its literature, indicates that it shouldnot be
disposed with other household wastes at the end of
its working life. To prevent possible harm to the
environment or human health from uncontrolled
waste disposal, please separate this from other
types of wastes and recycle it responsibly to
promote the sustainable reuse of material
resources.
Household users should contact either the retailer
where they purchased this product, or their local
government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and
check the terms and conditions of the purchase
contract. This product should not be mixed with
other commercial wastes for disposal.
Correct Disposal of This Product
SKU: CM-S 26322 BG
Building NO.5, Shaer Bluesky Science and Technology Park,
Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Loading...