ZMODO CM-S24959SV-AD User Manual

Page 1
Vari-Focal IR Audio Camera
Users Guide
CM-S24959SV-AD
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 2
SAFETY PRECAUTIONS
1. Do no t drop objects on the product or apply strong shoc k to it. Keep away from a location subject to exce ssive vibration or magnetic interferenc e.
2. Do no t install in a location subject to high temp erature (over 120F), low temperature (bel ow
-5F) , or high humidity. Doing so may cause fire or elec tric shock.
3. If yo u want to relocate the already installed prod uct, be sure to turn off the power and then move o r reinstall it.
4. Rem ove the power plug from the outlet when then ther e is a lightning. Neglecting to do so may cause
fire o r damage to the product.
5. Kee p out of direct sunlight and heat radiation sour ces. It may cause fire.
6. Ins tall it in a place with good ventilation.
7. Avoid aiming the camera directly towar ds extr emely bright objects such as sun, as this may dama ge the CCD image sensor.
8. Apparatus shall not be exposed to dr ipping or spla shing and no objects filled wi th liquids, suc h as vase s, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect devi ce and shal l stay readily operable at any time.
CAUTIO N: TO R EDU CE THE R ISK O F ELE CTR IC SH OCK , DO NOT REMO VE RE AR CO VER . NO US ER SE RVIC EAB LE PARTS INSIDE . REF ER TO Q UALIFIED SER VIC E PER SON NEL .
CAUTI ON
RIS K OF ELEC TRIC
SHO CK DO NOT O PEN
Thi s symbo l indic ates hi gh voltage i s pre sen t ins ide . It is dan gerous to ma ke an y kin d of co nta ct wi th any insi de pa rt of th is prod uct.
Thi s symbo l alert s you tha t impor tant li terat ure con cerni ng ope ratio n and mainte nan ce ha s bee n inc lud ed with thi s pro duct.
WARNING
1. Be su re to use only the standard adapter that is spec ified in the specification sheet. Using any othe r adapter could cause fire, electrical shoc k, or dama ge to the product
2. Inc orrectly connecting the power supply or repl acing battery may cause explosion, fire, elec tric shock, or damage to the product.
3. Do no t connect multiple cameras to a single adap ter. Exceeding the capacity may cause
abno rmal heat generation or fire.
4. Sec urely plug the power cord into the power rece ptacle. Insecure connection may cause fir e.
5. Whe n installing the camera, fasten it securely a nd firm ly. A falling camera may ca use personal injury
6. Do no t place conductive objects (e.g.screwdr ivers, coin s, metal things, etc.) or containers filled w ith wate r on top of the camera. Doing so may cause pers onal injury due to fire, electric shock, or fal ling obje cts.
7. Do no t install the unit in humid, dusty, or sooty loca tions. Doing so may cause fire or electric shoc k.
8. If an y unusual smells or smoke come from the unit, stop u sing the product. In such case, immediately disc onnect the power source and contact the serv ice center. Continued use in such a condition may ca use fire or electric shock.
9. If th is product fails to operate normally, contact the near est service center. Never attempt to modify this p roduct in any way. (ZMODO is not liable for prob lems caused by unauthorized modificatio ns or atte mpted repair.)
10. Wh en cleaning, do not spray water directly onto part s of the product. Doing so may cause fire or elec tric shock.
1
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 3
PRODUCT OVERVIEW
Product Overview
Keep an eye on the people and places you care about most with this color CCD bullet camera. Featuring imaging provided by a 1/3” Sony Color CCD, it delivers good video quality, reliable operation, a long operating life, and high value. With 36 built in IR LEDs, this camera can capture video in night vision mode up to 130’ away. With 4~9mm vari-focal lens, it allows you to have a wider or further view angle. This bullet camera is designed for indoor or outdoor use, and can easily be mounted for the perfect viewing angle. BNC and RCA connections are used for video and power. Installation is easy and hassle free, just plug and play.
Main Features
1/3" Sony Color CCD Image Sensor
Buil t-in Audio
540 TV Lines, Horizontal 4~9mm Vari-focal Lens Weatherproof: Yes Signal: NTSC Iris: Auto Night Vision Min. Light: 0 Lux (IR On) IR Irradiation Distance: 130' (40m) Operation Temperature: -5F ~ 120F Mount: Wall Video Connector: BNC Power Connector: RCA 12V DC
1) CM- Vari-Focal IR Audio Camera
1) A Card
4) Screws
1) Package Box
S24959SV-AD
Package includes
Please check your camera and accessories included in the package. Those components are as shown below:
WWW. ZMO
D
O
.CO
M
CC
D C
A
MERA
C
CD
CA
M
ERA
W
W
W.
Z
M
O
DO
.C
O
M
CC
D
CA
ME
R
A
Camera Card
Screws Package Box
2
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 4
SCHEMATIC DIAGRAM
3
Main Bod y
1
2
3
Lens
LEDs
Screw Adj us tm ent
Mount Br ac ke t
4
5
6
Focus
7
Zoom
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 5
CONNECTING CABLES
4
To connect cables
1. Connect the BNC cable to the video connector attached on your camera
2. Connect the BNC cable to the Video Input on a monitor, DVR or Video Balun.
3. Connect the power adapter to the RCA Power connector attached on your camera. When the monitor is turned on, the camera image appears.
It is very important that you identify these ends before installing the cable so that you have the correct ends at the correct location.
Note
Monitor
RCA Cable
DVR
Vi deo B alun
Monitor
DVR
BNC Cable
RC A Cable
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 6
HOW TO INSTALL
Before installation
Please read the following instructions before installing your camera:
You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.
Do not allow the cable to be caught in a pinched area, otherwise the electric line cover may be damaged. This may cause cable breakdown or fire.
When installing your camera, don't allow anyone to walk or stand under your installation site, and remove all valuable items. A dropped camera may cause injury to bystanders or harm to valuable items.
Installation procedure
To install your camera
5
Drill four small holes on the mounting location.
Note
This camera can only be mounted on the wall.
step
1
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 7
HOW TO INSTALL
6
Last, adjust the slope of the lens by twirling the
cameras up and down, left and right to make sure that the front of the Main Body is facing the camera’s
monitoring area. There are two focus screws in the rear of the camera for you to adjust your lens.
step
Attach the Main Body to the mounting location using the 4 screws supplied in your package. As
shown in the picture, push the 4 screws into the four holes at the end of the camera Mount Bracket, then twist
them into the holes on the wall using screwdriver.
Note
There are three screws on the front end of the camera Mount Bracket. With the screws on the two sides, you can adjust the cameras up and down, and with the screws under it, you can adjust the cameras left and right to make sure that the camera is facing the monitoring area.
step
2
3
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 8
CAMERA SPECIFICATION
Item Details
Long Range Vari-Focal IR Bullet Audio Camera
DC 12V
NTSC Standard color system PAL Standard color system
(525 Lines, 60 Fields)
(625 Lines, 50 Fields)
Approx. ?mA
1/3 inch SONY Color CCD
510(H) x 492(V), 250,920 pixels
NTSC Standard PAL Standard
525 Lines 625 Lines
Internal Synchronization
540 TV Lines
0.0Lux (IR Lamps on) 36 LEDs
Visible up to 40m(130')
1.0Vp-p, 75ohms
Focal Length
Zone
Limit of Viewing Angle
Vari-focal 4~9 mm
Horizontal
Vertical
39°~72° 32°~63°
> 48dB
Auto Iris
Auto Gain Control
Auto Back Light Compensation
Auto Switching between Color and B&W by day and night change(D/N)
Silver
-5F—120F
7.4"x3.7”x3.5”
2.29 lbs
Product type
Power input
Broadcast type
Power Consumption Image device
Effective Pixels
Scanning mode
Synchronization mode Horizontal resolution
Minimum illumination IR Lamps
IR Distance Signal output
Lens
S/N Ratio
Controls
Product color Operation temperature
Size Weight
Mounting
Wall
Specifications for NTSC & PAL Standard
7
Built-in
Audio
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 9
8
This device complies with part 15of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 1 5 of FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Note
FCC Statement
(Waste Electrical & Electr onic Equipm ent) (Applicable in the
Europe an Union and other Europe an countries with
separa te collection systems) This marking shown o n the product
or its lit erature, indicates that i t shouldnot be dispos ed with other household w astes at the end of
its work ing life. To prevent possib le harm to the enviro nment or human health fro m uncontrolled
waste di sposal, please separa te this from other types of w astes and recycle it respon sibly to promot e the sustainable reuse o f material
resour ces. Househ old users should contac t either the retailer
where th ey purchased this produ ct, or their local govern ment off ice, for details of where and h ow they can take t his item for environmenta lly safe recycling.
Busine ss users should contact the ir supplier and check th e terms and conditions of the p urchase
contra ct. This product should not b e mixed with other co mmercial wastes for dis posal.
Correct Disposal of This Product
SKU: CM-S24 959SV-AD
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Loading...