ZMODO CM-S22326BW-AD User Manual

Page 1
Outdoor IR Audio Camera
Users Guide
CM-S22326BW-AD
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 2
SAFETY PRECAUTIONS
1. Do not dr op objects on the product or apply stro ng shock to i t. Keep away from a location subject to excess ive vibration or magnetic interfe rence.
2. Do not in stall in a location subject to high temper ature (over 120F), low temperature (below
-5F), or h igh humidity. Doing so may cause fire or electr ic shock.
3. If you wa nt to relocate the already installe d produc t, be sure to turn off the power and then move or re install it.
4. Remov e the power plug from the outlet when the n there is a l ightning. Neglecting to do so may cau se
fire or da mage to the product.
5. Keep ou t of direct sunlight and heat radiati on source s. It may cause fire.
6. Insta ll it in a place with good ventilation.
7. Avoid aiming the cam era directly towards extrem ely bright objects such as sun, as this may damage t he CCD image sensor.
8. Appara tus shall not be exposed to dripping or splash ing and no objects filled with liquid s, such as vases, s hall be placed on the apparatus.
9. The Mains plug is use d as a disconnect device and shall st ay readily operable at any time.
CAUTIO N: TO RE DUC E THE RISK OF E LEC TRI C SHO CK, DO NOT REMO VE RE AR COVER. N O USE R SERV ICE ABL E PARTS INSIDE . REF ER TO QU ALI FIE D SERV ICE P ERS ONNE L.
CAUTI ON
RIS K OF ELEC TRIC
SHO CK DO NOT O PEN
Thi s symbo l indic ates hi gh voltage i s pre sent insi de. I t is dan gerous to ma ke an y kind of con tac t wit h any in sid e par t of th is prod uct.
Thi s symbo l alert s you tha t impor tant li terat ure con cerni ng ope ratio n and mainte nan ce has been i ncl ude d with t his pro duct.
WARNING
1. Be sure t o use only the standard adapter that is specif ied in the specification sheet. Usi ng any other ad apter could cause fire, electrica l shock, or damage t o the product
2. Incor rectly connecting the power suppl y or replac ing battery may cause explosion, fi re, electr ic shock, or damage to the product.
3. Do not co nnect multiple cameras to a single adapte r. Exceeding the capacity may cause
abnorm al heat generation or fire.
4. Secur ely plug the power cord into the power recept acle. Insecure connection may cau se fire.
5. When in stalling the camera, fasten it secu rely and firmly. A fall ing camera may cause personal injur y
6. Do not pl ace conductive objects (e.g.scr ewdrivers, coins, m etal things, etc.) or containers filled with water on t op of the camera. Doing so may cause person al injury due to fire, electric shock , or falling object s.
7. Do not in stall the unit in humid, dusty, or sooty locati ons. Doing so may cause fire or electri c shock.
8. If any un usual smells or smoke come from the uni t, stop usi ng the product. In such case, immediately discon nect the power source and contact the servic e center. Continued use in such a condit ion may caus e fire or electric shock.
9. If this p roduct fails to operate normally, contact the neares t service center. Never attempt to modify this pro duct in any way. (ZMODO is not liable for proble ms caused by unauthorized modific ations or attemp ted repair.)
10. When c leaning, do not spray water directl y onto parts of t he product. Doing so may cause fire or electr ic shock.
1
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 3
PRODUCT OVERVIEW
Product Overview
Main Features
1/3" Sony Color CCD Image Sensor Audio: Built-in 420 TV Lines, Horizontal 6mm Lens Weatherproof: Yes Signal: NTSC Iris: Auto Night Vision Min. Light: 0 Lux (IR On) IR Irradiation Distance: 80’ (25m) Operation Temperature: -5F ~ 120F Mount: Wall Video Connector: BNC Power Connector: RCA 12V DC
Keep an eye on the people and places you care about most with this color CCD bullet camera. Featuring imaging provided by a 1/3” Sony Color CCD, it delivers great video quality, reliable operation, a long operating life, and p remium performance at an affordable price. With 36 built in IR LEDs, this camera can capture video in night vision mode up to 80’ away. This bullet camera is designed for indoor or outdoor use, and c an easily be mounted for the perfect viewing angle. BNC and RCA connections are used for video and pow er. Installation is easy and hassle free, just plug and play.
1) CM-S22326BW-AD Weatherproof IR Audio Camera
1) A Card
4) Screws
1) Package Box
Package includes
Please check your camera and accessories included in the package. Those components are as shown below:
WWW. ZMO
D
O
.CO
M
CC
D C
A
MERA
C
CD
CA
M
ERA
W
W
W.
Z
M
O
DO
.C
O
M
CC
D
CA
ME
R
A
Camera Card
Screws Package Box
2
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 4
SCHEMATIC DIAGRAM
3
1
2
Lens
LEDs
Screw Adjustment
Mount Bracket
3
4
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 5
CONNECTING CABLES
4
To connect cables
1. Connect the BNC cable to the video connector attached on your camera
2. Connect the BNC cable to the Video Input on a monitor, DVR or Video Balun.
3. Connect the power adapter to the RCA Power connector attached on your camera. When the monitor is turned on, the camera image appears.
It is very important that you identify these ends before installing the cable so that you have the correct ends at the correct location.
Note
Monitor
RCA Cable
DVR
Vi deo Balun
Monitor
DVR
BNC Cable
RC A Cable
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 6
HOW TO INSTALL
Before installation
Please read the following instructions before installing your camera:
You have to check whether the location (ceiling or wall) can bear five times the weight of your camera.
Do not allow the cable to be caught in a pinched area, otherwise the electric line cover may be damaged. This may cause cable breakdown or fire.
When installing your camera, don't allow anyone to walk or stand under your installation site, and remove all valuable items. A dropped camera may cause injury to bystanders or harm to valuable items.
Installation procedure
To install your camera
5
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Drill three small holes on the mounting location.
1
step
1
Page 7
HOW TO INSTALL
6
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Last, adjust the slope of the lens by
twirling the cameras up and down, left and right to make sure that the front of the Main
Body is facing the cameras monitoring area.
3
step
Attach the Main Body to the mounting location using the 4 screws supplied
in your package. As shown in the picture, push the 3 screws into the three holes at the
end of the camera Mount Bracket, then twist them into the holes on the wall or celling using screwdriver.
2
step
There are three screws on the front end of the camera Mount Bracket. With the screws on the two sides, you can adjust the cameras up and down, and with the screws under it, you can adjust the cameras left and right to makesure that the camera is facing the monitoring area.
Note
Page 8
CAMERA SPECIFICATION
Item Details
Weatherproof IR Outdoor Audio Camera
DC 12V
NTSC Sta ndard color system PAL Standard color system
(525 Lines, 60 Fields)
(625 Lines, 50 Fields)
Approx. ?mA
1/3 inch Sony Color CCD
510(H) x 492(V), 250,920 pixels
NTSC Sta ndard PAL Standard
525 Lines 625 Lines
Internal Synchronization
420 TV Lines
0.0Lux (IR Lamps on) 36 LEDs
Visible up to 25m(80’)
1.0Vp-p, 75ohms
Focal Le ngth
Zone
Limit of Viewing Angle
6 mm
Horizontal
Vertical
53° 45°
> 48dB
Auto Iris
Auto Gain Control
Auto Back Light Compensation
Auto Switching between Color and B&W by day and night change(D/N)
Beige
-5F—120F
5"x3"x2.5"
1.19 lbs
Product type
Power input
Broadcast type
Power Consumption Image device
Effective Pixels
Scanning mode
Synchronization mode Horizontal resolution
Minimum illumination IR Lamps
IR Distance Signal output
Lens
S/N Ratio
Controls
Product color Operation temperature
Size Weight
Mounting
Wall or celling
Specifications for NTSC & PAL Standard
7
Built-in
Audio
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Page 9
8
This device complies with part 15of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 1 5 of FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Note
FCC Statement
(Waste Electrical & Ele ct ro ni c Equipment) (Applicable in the
European Union and other European countries with
separate collection systems) This marking shown on the product
or its literature, indicates that it shouldnot be disposed with other household wastes at the end of
its working life. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material
resources. Household users should contact either the retailer
where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Correct Disposal of This Product
SKU: CM-S 22326 BW-AD
Building NO.5, Shaer Bluesky Science and Technology Park, Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
Loading...