ZLINE RASWM30, RARG36, RTS30 User Manual
Ranges & Cooktops
1
CONTENTS
Installation Guide Users Manual
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS 1
WARRANTY AND SERVICE 3
BEFORE INSTALLATION 5
INSTALLING THE LEGS 7
ANTI-TIP STABILITY DEVICE &
RANGE TOP/DROP-IN INSTALL
INSTALLATION REQUIREMENTS &
RANGE TOP/DROP-IN CUT-OUTS
ELECTRICAL CONNECTION 12
WIRING SCHEMATICS 13
GAS CONNECTION 15
8
11
ROOM VENTILATION 24
SURFACE BURNER LAYOUT 24
OVEN COOKING 25
USING THE OVEN 26
MAINTAINING YOUR RANGE 30
TROUBLESHOOTING 32
GAS CONVERSION PROCEDURE 18
INSTALLATION CHECKLIST 22
FINAL PREPARATION 22
Thank You
Location of Applicance Tags
We want to thank you for choosing one of our beautiful professional ranges. We
know that you have many brands to choose from and we are thrilled that you have
decided to place one of our products in your home.
Our appliances are designed according to the strictest safety and performance
standards for the North American market. We follow the most advanced
manufacturing process. Each appliance leaves the factory after thorough quality
inspection and testing. Our distributors and our service partners are ready to answer
any questions you may have regarding installation of your ZLINE product.
This manual will help you learn to use the product in the safest, most efficient manner,
and care for it so that it may give you the highest satisfaction for years to come.
This manual also includes directions for the professional installer that will install the
product in your home. We recommend professional installation by trained personnel.
Please keep this manual for future use.
Range Installation Video
The rating tag shows the model and serial number of your range. The tag is located
under the front edge of the range cooktop. The tag is visible when the oven door is
open.
Appliance Tag Here
Important Appliance Information
Dealer
Model
Date Installed
Installer
Important Safety Instructions
An air curtain or other overhead range, range, cooktop hood which
WARNING
The manufacturer will not be responsible for any damage to property or to persons
caused by incorrect installation or improper use of the appliance.
The manufacturer reserves the right to make changes to its products when considered
necessary and useful, without affecting the essential safety and operating
characteristics.
This appliance has been designed for non-professional, domestic use only. Do not
place any pot or pan on the open oven door, the door is made of glass and can
break under the weight.
Before beginning installation, please read these instructions completely and carefully.
Do not remove permanently affixed labels, warnings, or plates from the product.
This may void the warranty. Please observe all local, state and national codes and
ordinances. Please ensure the range is properly grounded. The installer should leave
these instructions with the consumer who should retain for local inspectors use and
for future reference. The plug should always be accessible. Installation must conform
with local codes or in the absence of codes, the National Fuel Gas Code NSIZ223.
1/NFPA54. Electrical installation must be in accordance with the National electrical
code ANSI/NPA70-latest edition and/or local codes. In Canada: Installation must
be in accordance with the current CAN/CGA-fe 149.1 National gas installation
code or CAN/CGA-B 149.2, Propane installation code and/or local codes.
Electrical installation must be in accordance with the current CSA C22.1 Canadian
electrical codes Part 1 and/or local codes.
Installation of any gas-fired equipment should be made by a licensed plumber. A
manual gas shut-off valve must be installed in the gas supply line ahead of the oven
in the gas flow for safety and ease of service.
operates by blowing downward airflow onto the range, shall not be
used/installed in conjunction with this gas range.
Important Safety Instructions
Important Safety Information
Please read and follow these important instructions for the safety of your home and
the people living in it.
If the information in this manual is not followed exactly, a fire or
WARNING
Do not store or use gasoline or any other flammable substances in the vicinity of this
or any other appliance.
What To Do If You Smell Gas
DO NOT light any appliance.
DO NOT touch any electrical switch.
DO NOT use any phone in your building.
Immediately call your gas supplier from a neighbor’s phone, follow the gas supplier’s
instructions.
In the case you cannot reach the gas supplier, call the fire department.
Installation and service must be conducted by a qualified installer, service agency, or
the gas supplier.
WARNING
explosion may result causing property damage, personal injury, or
death.
Never use this appliance as a space heater to heat or warm the
room. Doing so may result in carbon monoxide poisoning and
overheating of the oven.
1 2
Warranty and Service Product Dimensions
Warranty and Service
All range products carry a one year parts warranty. Service on all products shall be
carried out by factory-trained professionals only. For warranty service, please call
customer service.
Replacement Parts
Only authorized replacement parts may be used in performing service on this appli-
ance.
Replacement parts are available from ZLINE. Call 1-614-777-5004.
Product Dimensions
Dropins:
Cooktops:
Cooktop cut outs:
Internal Dimensions
48” Model: 26.5” W/12.5”W x 18.5”D x 14”H
36” Model: 30.5”W x 18.5”D x 14”H
30” Model: 26.5” W x 18.5”D x 14”H
Drop-in & Cooktop
Installation Video
3 4
Before Installation
Before Installation
This appliance shall only be installed by an authorized professional.
The appliance shall be installed in accordance with the standards of the country
where it will be installed. The installation of this appliance must conform to local
codes and ordinances. In the absence of local codes installation must conform to
American National Standards, National fuel Gas code ANSI Z223.1-Latest edition/
NFPA 54 or B 149.1.
The appliance, when installed, must be electrically grounded in accordance with
local codes or, in the absence of local codes, with the National Electrical code,
ANSI/NFPA 70.
If local codes permit, a flexible metal appliance con-nections with the new AGA
or CGA certified design, max 5 feet (1,5m) long, 34˝ I.D. is recommended for
connecting this appliance to the gas supply line. DO NOT bend or damage the
flexible connector when moving the appliance.
This appliance must be used with the pressure regulator provided. The regulator must
be properly installed in order to be accessible when the appliance is installed in
its final location. The pressure regulator must be set for the type of gas to be used.
The pressure regulator has 34˝ female pipe thread. The appropriate fitting must be
determined based on the size of your gas supply line, the flexible metal connector
and the shut-off valve.
The appliance must be isolated from the gas supply piping system by closing its
individual manual shut-off valve during any pressure testing of the gas supply piping
system at test pressures equal to or less than 34 PSI(13,8w.cpr 3,5kPA).
All opening holes in the wall and floor, back and under the appliance shall be sealed
before installation of the appliance.
A manual valve shall be installed in an accessible location in the gas line external to
the appliance for the purpose of turning on and shutting off the gas to the appliance.
Room Ventilation
An exhaust fan may be used with the appliance; in each case it shall be installed
in conformity with the appropriate national and local standards. Exhaust hood
operation may affect other vented appliances; in each case it shall be installed in
conformity with the appropriate national and local standards.
Type of Gas
This appliance is shipped from the factory for use with natural gas. For use with
propane LP gas, please follow the conversion procedure described on pg. 18. A step
by step conversion procedure is also included with each set of LP gas nozzles.
Gas Pressure
The maximum inlet gas supply pressure incoming to the gas appliance pressure
regulator is 34PSI (13,8w. cpr 3,5kPA).
The minimum gas supply pressure for checking the regulator setting shall be at least
1˝ w.c (249 Pa) above the inlet specified manifold pressure to the ap-pliance (This
operating pressure is 4˝ w.c. (1.00kPa) for Natural gas and 11˝ w.c. (2.75 kPa) for
LP gas.
Gas cooktop requires 1”- 6”side wall spacing above the counter height for
proper combustion. Please review specific model installation instructions for
required dimensions. 30 inches between the cooktop and bottom of the cabinet
above. 0.25 inches for sides below countertop height.
NOTE: Please consult your local building codes for variations with installation.
Do not use aerosol sprays in the vicinity of this appliance while it is
WARNING
in operation.
5 6
Installing the Legs
Installing the Legs
Installing the Anti-tip Stability device
The ranges must be used with the legs properly installed. Four height-adjustable legs
are shipped with the range, in a foam container above the range.
1. Before installing the legs, position the appliance near its final location as the legs
are not suitable for moving the appliance over long distances.
2. After unpacking the range, raise it enough to insert the legs in the appropriate
receptacles situated on the lower part of the appliance. Lower the range gently to
keep any undue strain from legs and mounting hardware.
3. Adjust leg height to the desired level by twisting the inside portion of the leg
as-sembly until the proper height is reached. Check with a level that the cooktop is
perfectly level.
Installing the Anti-Tip Stability Device
The Anti-tip bracket shipped with the range must be properly
secured to the rear wall as shown in the picture on the following page.
The height of the bracket from the floor must be determined after the range legs
have been adjusted to the desired height and after the range has been leveled.
A child or adult can tip the range and be killed; Re-engage the
WARNING
anti-tip device if the range is moved. Failure to do so can result in
death or serious injury.
Range Top/Drop-in Installation
Attaching the hotplate
To prevent liquids from accidentally leaking into
the underlying storage space, the appliance is
equipped with a special gasket. To apply this
gasket, carefully follow the instructions in Fig.
3. Lay out the protective sealing strips along
the edges of the opening in the bench top and
carefully overlap the strip end. (See Fig. 3).
insert the hotplate into the bench top opening.
With a screwdriver assemble the brackets (A) to
the hotplate bottom by means of the screws (B)
(See Fig. 4). Slide the hooks into position and
secure them with the screws. Trim the part of the
sealing strips that extend beyond the hotplate
base.
Gas Connection
Please review gas connection on page 15.
7 8
Loading...