ZKTeco LS-PE1210G User Manual

POE Splitter
User Manual

• LS-PE1210G is a high-performance optoelectronic isolation POE product complies

with the IEEE 802.3af Ethernet standard, and with the size of 28*82mm and wire

length of 205mm. The output power meets the power consumption demand of

over 90% camera.

• Chip: SD4952B. Compatible with 38~57V DC voltage, overvoltage protection.

• POE Standard: IEEE802.3af

• Compatible with non-standard 48V~57V power supply (only support with 45+78-).

• Output Power: 15.4W (12V/1A)

• Isolation: 1500V

• POE Power Pin: support both (1, 2)+/(3, 6)- and (4, 5)+/(7, 8)-

• Plug output: Data (1, 2)/(3, 6)

• Power Output by 5521DC Male (5.5*2.1mm).

5521DC Male

ZKtechnology.com

205+/-1mm

82+/-1mm

28+/-1mm

Input RJ45 Size

28+/-1mm

23.5+/-1mm

POE Splitter User Manual | April, 2019

How to Use

Correct Connection

Using between POE Switch and NON-POE Device. The Active POE Splitter splits POE signal into a

12VDC power and 10/100Mbps Ethernet data source.

Power 12V + DATA Power 48V + DATA

Network Cable Power + DataActive POE Splitter 48V 12V

NON-POE Device POE Device

CAT 5e CAT 5e

CAT 5e CAT 5e

ZKtechnology.com

DC Power plugRJ45 plug

POE Splitter User Manual | April, 2019