FPO
RFID/Prox
Prox Card (Thick)
Credentials
Prox Key-Fob
Prox-Sticker
Prox Card (Thin/ISO)
Note When ordering ZKAccess readers, be sure to specify which type card
reader technology and credentials you need PRIOR to placing your order.
For customers already using existing non-ZKAccess card readers and cards, ZKAccess also provides 125 KHz key fobs which can be
clipped on to existing customers’ cards having a badge clip slot. And for customers having non-ZKAccess cards with no badge clip slot,
we also oer 125 KHz self-adhesive RFID prox stickers.
Specications
Dimensions
ZKAccess RFID/Prox credentials can be
used with any ZKAccess readers which
have a built-in 125 KHz prox card reader.
Part Numbers
Interface
EM-4100 series prox cards
with a EM/Marin S.A.
memory chip.
125 KHz (generic prox)
26-bit, Read-only
13.56 MHz (Mifare)
Read-only
Passive prox/RFID
responder
Design and Specications subject to change without notice
Key Fob size:
1.37 in x .91 in x .15 in
34.8 mm x 23mm x 3.9 mm
Prox Card Thick (clamshell)
Length: 3.36 in (85.47 mm)
Width: 2.12 in (53.85 mm)
Thickness: .077 in (1.97 mm)
Badge clip slot: 0.63 in X .13 in
RFID prox sticker size:
Diameter: 7/8 in (22.22 mm)
Thickness: 1/16 in (1.59 mm)
Prox Card Thin (ISO)
Length: 3.36 in (85.47 mm)
Width: 2.12 in (53.85 mm)
Thickness: 0.03 in (0.8 mm)
Badge clip slot: 0.63 in X 0.13 in
(16 mm X 3.30 mm)
ZKAccess
6 Kingsbridge Road, Unit 8, Faireld, NJ 07004
Phone: (862) 505-2101 • Fax: (862) 204-5906 • sales@zkaccess.com • www.zkaccess.com
© Copyright 2016. ZKTeco Inc. ZKTeco Logo and ZKAccess Logo are registered trademarks of ZKTeco or a related company.
All other product and company names mentioned are used for identication purposes only and may be the trademarks of their respective owners.
All specications are subject to change without notice. All rights reserved.
Prox Card Thick
Clamsheet-type card
Prox Card Thin
ISO-type card
Prox Key-Fob
Can be clipped on to keychain
and pre-unched cards
Prox- Sticker
Self-adhesive backing sticks
onto cards, phone, etc.