ZKAccess ML10R-S, ML10R-G, ML10-G, ML10-G-BT User Manual

1

User Manual

PL10/ML10

Version: 1.0

1

Note

1. New lock is configured to grant ANY fingerprint access to unlock.

2. The lock is equipped with mechanical keys for manual unlocking. Remove mechanical keys from
the package and keep them in a safe place.

3. To power on the lock, four alkaline AA batteries (not included) are required. Non-alkaline and
rechargeable batteries ARE NOT RECOMMENDED.

4. Please avoid strong light direct to the fingerprint holder, otherwise the infrared sensor might be
disturbed.

5. The operation of setting lock has a stand-by time limit of 10 seconds; Without any activity, lock will
shut off after 10 seconds.

6. Keep your fingers clean when using this lock.

2

Appearance

1 Infrared sensor hole
2 LED
3 Fingerprint Sensor
4 Handle
5 Mechanical key hole
6 Battery box cover
7 Battery Area
8 Button / Temporary User
9 Button / Admin user
10 Back LED
11 Button / Delete user
12 Button / Add user
13 Reset Button
14 Button / Normal User
15 9V Emergency battery interface

1
2

3

4

5

6

7
8

9

10
11
12

13

14

15

3

User Type

Capacity

Privilege

Admin user

10

Add/delete fingerprint; Enable Normal
Open; Unlock the door

Normal user

60

Unlock the door; Enable Normal Open

Temporary user

20

Unlock the door; Enable Normal Open

Buttons

Function

Other functions

Add Users

Delete Users

Admin User Group

Enable Normal Open

Normal User Group

Temporary User Group

Profile

User Introduction

Button Definition

4

Lock Status Indication

Lock Status

Indication

Operation success

1 Beep and LED blinks green

Operation failure

2 Beep and LED blinks red

Low battery

7 Beep and LED blinks red 7 times

Unlocking

1 Beep and electric engine makes a rolling sound for the first
time, which indicates that the door is open.

Locking

Electric engine makes a rolling sound for the second time,
which indicates that the door is closed.