ZIV TTL-NF3 User Manual
TTL
CORD
3' TTL CORD WITH
FOCUS ASSIST FOR NIKON
TTL-NF3
COMPATIBLE
WITH
NIKON i-TTL
USER MANUAL
THANK YOU FOR CHOOSING ZIV.
The TTL-NF3 is an off-camera TTL cord for dedicated
Nikon camera and flash units. This TTL cord features
an autofocus assist light to help the camera focus in
low-light conditions. A handy on/off switch allows
you to turn the AF assist light on when you need
it, and off when you don’t. This TTL cord mounts to
the cameras hot shoe while the flash can be held in
your hand and moved around as you need to adjust
the light. The 3’ coiled cable ensures that you can
position the flash away from the camera’s lens. And
the TTL-NF3’s mounting foot enables you to attach
the flash base to a camera bracket or light stand.
1
PRECAUTIONS
• Please read and follow
these instructions and
keep this manual in a safe
place.
• There are no userserviceable parts inside
the device. Do not
attempt to disassemble or
perform any unauthorized
modification.
• Do not operate the
unit in the presence of
flammable gas or vapors.
• Do not handle with wet
hands or immerse in
water or expose to rain.
Failure to observe these
precautions could result
in fire or electric shock.
• Do not use or leave the
device in conditions of
extreme heat, severe cold,
or high humidity.
• Keep out of the reach
of children. This device
contains small parts
which may pose a choking
hazard.
• Turn off the power of the
camera before attaching
the TTL cord.
• Clean the unit with a soft,
dry cloth.
• Make sure the item is
intact and that there are
no missing parts.
• Handle the unit with care.
• All photos are for
illustrative purposes only.
2
Loading...