Zippy Technology RF730 User Manual

“2.4GHz All Around Freedom, Infinite Possibilities”

RF-730 User's Manual

System requirements

 IBM or compatible PC

 Windows and Macintosh Operating System

 Pentium-equivalent processor or above

 One available USB port

OS support

 Windows Vista

 Windows XP

 Windows 2000/NT

 Windows ME

Introduction

Thank you for your patronage of purchasing our cordless keyboard and optical mouse. For

your own safety, please read this manual thoroughly before using this product. After you

have read this manual, please keep it in place for reference when necessary.

Contents in the package

The following items are included in the package. Please make sure all items are accounted

for as you open the package. If there was any item missing or damaged, please contact the

reseller where the product was purchased or our support center.

 Wireless Keyboard x 1

 USB 2.4GHz dongle receiver x 1

 Installation CD x 1

 Manual/warranty x 1

 Alkaline AAA batteries x2

Warning

Zippy Technology Corporation and its respective distributors and resellers are not

responsible for any malfunction, damage or personal injury incurred by:

Any malfunction, damage or personal injury caused by the malfunctioning or damage of the

1

user’s personal computer or misuse of this product.

Any attempt to dismantle, change or modify this product in any manner.

Warning

Please do not use this product in ashy, wet, or oily environments. Failure to do so may

shorten the life of this product and may cause bodily harm.

Please keep this product as far away from Radio Frequency interruption areas as possible.

This is not an outdoor product. Exposing this product to the elements may cause damages

to the product and bodily harm to its users.

Please do not use petroleum, benzene or thinner-based solution to clean this product.

Warranty Information

This product is backed by a One-Year Manufacturer’s Warranty, starting from the date of

purchase. The warranty covers for free repair in accordance with the contents stated herein

but does not cover wear and tear and any malfunction or damages as results of improper

usage as stated in this manual.

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions

(1) This device may not cause harmful interference and

(2) This device must accept any interference received, including interference that may

cause undesired operation

You are cautioned that changes or modifications not expressly approved by the party

responsible for compliance could void your authority to operate the equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

2

Specifications

 Keyboard

■ Dimensions: 392.5 X 163 X 25.3mm

■ Weight:600+/- 20g (with Battery) (重量請實測)

■ Key Number: 103 Keys(By language)

■ Battery: 2 x AAA batteries

■ Battery Life: 3 Month (Base on average usage)

■ ID: unique ID for each keyboard

■ Radio Frequency: 2.4 GHz

■ Hot Keys : WWW home, my favorite, search, e-mail, Media

 Dongle Receiver

■ Dimensions: 71x 24 x 13 mm

■ Weight: 15+/-3g (重量請實測)

■ Interface: USB 1.1

Attention

The mouse’s Laser sensor may not work on bumpy, reflective and/or translucent materials;

such as glass, polished table top and/or cloth. We recommend using a mouse pad for

improved accuracy.

Installation Procedure

Before installing this product please make sure you have one available USB port reserved

for the dongle receiver. If your computer did not have an available USB port, you may

purchase USB hub.

A. Setting up the Dongle Receiver

1. Plug the dongle receiver (FIG. 3) into an available USB port

2. Wait for Windows to install drivers for the dongle receiver, keyboard and mouse

3. When the dongle receiver has been properly initialized, its LED light will stay alit.

B. Setting up the Keyboard and Mouse

1. Open the keyboard’s battery compartment cover and insert the two pieces of AAA

Alkaline batteries. Make sure they are properly installed.

2. Replace the keyboard battery compartment cover.

3. Open the mouse’s battery compartment cover and insert the two pieces of AAA

Alkaline batteries. Make sure they are properly installed and Switch on the switch at the

bottom case.

3