Zippy R2T-6460P User Manual

PRODUCTS MANUAL

MR3 / R3U / R2T SERIES

2 + 1 Micro Redundant Power Supply

INDEX

1.1 Introduction page 1

1.2 Packing page 2

1.3 Model Designation page 2

1.4 Features page 3

1.5 Pre-Installation page 3

1.6 Drawing page 4 ~ 17

1.7 Specification page 18

1.8 Installation & Testing page 19 ~ 20

1.9 Hot-Swap Procedures page 20 ~ 21

1.10 Pinouts and function of connectors page 21

1.11 Trouble shooting page 22

1.1 INTRODUCTION

First of all, thank you for purchasing MR3 / R3U / R2T Series – 2 + 1 Micro
Redundant power supply, MR3, R3U AND R2T have the same main structure
and functions, the difference is on the shape and dimension, MR3 is similar to
PS/2 form factor, R3U is suitable for 3U chassis, R2T will be used in the front
side of 2U chassis, for each detail drawing, please refer to the section 1.6. .

The MR3 / R3U / R2T is a 2+1, Hot-swappable/Hot-pluggable, Micro Redundant
power supply set, it consists of:

(1) complete metal frame (nickel-plated)
(2) 2 + 1 compact size power modules
(3) backplane board

The MR3 / R3U / R2T Series hot swappable micro redundant power supply
offer a maximum 460 watts of output power. They provide Active
Power Factor correction (PFC) feature at full range AC Input complies with
IEC 1000-3-2/3 for critical applications.

The power unit’s size is compact each power modules built an interior 40 m/m
ball bearing DC fan for better ventilation. Particularly an 80 m/m DC Fan built
on the rear side of the whole system to make sure a safe working unit. Each
power module has designed with 6 outputs including +3.3V, +5V, +12V, -12V,

-5V & 5VSB circuits and higher current availability based on Intel ATX12V /
EPS12V standards. All you can see on the backplane board is just passive
components and this is the key point to a greater Power Supply MTBF.

The unit features a warning sub-system, including LED display, buzzer alarm,

2

TTL signal, I

C interface device ( optional feature in MR3 only ) etc., at the same
time, it guides user the fast way to find out the power supply Good or Fail
condition.

When all the power modules are at normal condition, it balances the load share
through its parallel design and results the power system increase reliability.

To really discover the power and ease in using these products, we recommend
that you read through this manual carefully.

1.2 PACKING

Your MR3 / R3U / R2T box package should consist of the following:

(A) MR3 / R3U / R2T *1
(B) Accessory pack (included one holding bracket for shipment)*1
(C) Products’ manual *1

1.3 MODEL DESIGNATION

Model number identification:

MR3 / R3U / R2T – 6460P

MR3 / R3U / R2T --- 2 + 1 Micro Redundant Power Supply(AC Input)
6 --- for 6 DC outputs (5V/12V/-5V/-12V/3.3V/5VSB) for
ATX12V / EPS12V Spec.
460 --- total output power, 460 (unit: watt)
P --- P for built in PFC (full range).

1.4 FEATURES

MR3 / R3U / R2T Series --- 2 + 1 Micro Redundant power supply ( w/PFC )
2+1, Hot swappable, Hot pluggable, AC Input, 460 W output

Compact size, 460W + 250W, PFC, ATX12V / EPS12V outputs

 True Redundant design (Passive backplane)
 All circuit been designed in the power module
 Hot swap, Hot plug ability
 Full range operations
 Active Power Factor Correction (PFC) built
 ATX 460W + 250W output power
 Balance load sharing design
 Remote sensing design
 Meet FCC, CISPR EMI regulation
 Faulty free - slide rail design

2

 Smart I

C interface design (optional feature in MR3)

 Space save / click type handle design
 Dual EMI Line Filter inlets design
 One piece 40 m/m ball bearing DC fan on power module design
 A 80 m/m ball bearing DC fan on power system rear side

1.5 PRE-INSTALLATION

Before installing the MR3 / R3U / R2T unit into the system chassis, please
review the following drawings page 4 ~ 17 and find out the best way to match
them.

1.6 DRAWING (page 4 ~ 17)

1.7 SPECIFICATIONS (page 18)