Zippy R1M-6250P User Manual
1.1 INTRODUCTION
First of all, thank you for purchasing R1M series redundant power supply for 1U.
The R1M is a 1+1 hot-swappable / hot-pluggable redundant power supply. It consists
of,
1) complete metal frame
2) compact size power module
3) backplane
The R1M series redundant power supply offer a maximum 250 watts of output power.
The power module is in compact size, and built-in a 40mm ball bearing DC fan for
better ventilation. Each power module is designed with 6 outputs (+3.3V, +5V, +12V,
-5V, -12V, and +5Vsb) circuits, and compliant to ATX12V. All you can see on the
backplane is just passive components and this is the key point for longer MTBF.
The R1M series offer a warning sub-system, including LED display, buzzer alarm, TTL
signal, It guides user the fast way to find out the power supply and DC fan status.
When all the power modules operate normally, it balances the load share through its
parallel design, which increases the reliability of power system.
To really discover the power system and ease in using it, we recommend you to read
through this manual carefully.
1.2 PACKING
Your R1M series should consist of the following,
a) R1M x 1
b) Accessory pack x 1
c) Product Manual x 1
1.3 MODEL DESINGATION
Model number identification
R1M-6zzzy
R --- redundant
1 --- in 1U height
6 --- 6 output channel (+3.3V, +5V, +12V, -5V, -12V & +5Vsb)
zzz --- total output power, zzz –250 (unit: watts)
y --- P: built-in PFC (full range)
1.4 FEATURES
R1M series, 250W + 250W redundant power supply with active PFC, complaint to
ATX12V
l True redundant design (passive packplane)
l All circuit designed into the power module
l Hot-swap and hot-plug ability
l Full range (90VAC – 264VAC) operation
l Active Power Factor Correction (PFC) built-in
l Balance load sharing design
l Remote sensing design
l Meet FCC, CISPR EMI regulation
l Faulty free- slide rail design
l Compact size for 1U chassis
l Dual EMI line filter inlets design
l Designed with one 40mm ball bearing DC fan on power module
1.5 DRAWING
Loading...