Zippy MRP-6420P User Manual

1.1 INTRODUCTION

First of all, thank you for purchasing MRW/MRP series redundant power supply.

The MRW/MRP series is a 1+1 hot-swappable / hot-pluggable redundant power
supply. It consists of,

1) complete metal frame

2) compact size power module

3) backplane

The MRW/MRP series hot swappable redundant power supply offer maximum
350/400/420 watts, and provide Active Power Factor correction (PFC) at full range AC
input that complaints to EN 61000-3-2 for CE norms. The power module is in compact
size, and built-in a 40mm ball bearing DC fan for better ventilation. Each power
module is designed with 6 outputs (+3.3V, +5V, +12V, -5V, -12V, and +5Vsb) circuits.
All you can see on the backplane is just passive components and this is the key point
for longer MTBF.

The units also offer a warning sub-system, including LED display, buzzer alarm, TTL
signal. It guides user the fast way to find out the power supply status.

When all the power modules operate normally, it balances the load share through its
parallel design, which increases the reliability of power system.

To really discover the power system and ease in using it, we recommend you to read
through this manual carefully.

1.2 PACKING

Your MRW/MRP series should consist of the following,

a) MRW series x 1
b) Accessory pack x 1
c) Product Manual x 1

1.3 MODEL DESINGATION

Model number identification

MRW /MRP -6zzzy

MR --- mini redundant
6 --- 6 output channel (+3.3V, +5V, +12V, -5V, -12V & +5Vsb)
zzz --- total output power, zzz – 350 / 400 / 420 (unit: watts)
y --- P: built-in PFC (full range)

1.4 FEATURES

MRW / MRP series, 350W / 400W / 420W, 1+1 mini redundant power supply with
active PFC.

l True redundant design (passive packplane)
l All circuit designed into the power module
l Hot-swap and hot-plug ability
l Full range (90VAC – 264VAC) operation
l Active Power Factor Correction (PFC) built-in
l Balance load sharing design
l Remote sensing design
l Meet FCC, CISPR EMI regulation
l Faulty free- slide rail design
l Isolated fence design to meet safety regulation
l Compact size (PS2 form factor)

1.5 DRAWING