Zipper's Performance MaxFlow Air Filter Kits User Manual

Zipper’s MaxFlow Air Filter Kits

#172-130

Complete MaxFlow Air Filter Kits

Here’s a nice power increase that’s easy to install and easy on the budget! Our

MaxFlow air ﬁ lter kit is designed to completely replace the stock air cleaner assembly,

featuring our Max Flow element. This cleanable/oilable, pleated element is over 2-3/4” deep to really let that engine breathe! Also included is a one-piece cast backing plate with internal crankcase venting and mounting hardware. Fits fuel injected and carbureted Twin Cam® engines equipped with the factory TC “football” cover. Available with satin aluminum, black or chrome plated breather ports. Bolt it on and feel the difference!

PART NO. DESCRIPTION

#117-440 #117-440C #117-440B #150-591 #172-114

Fits ’99-Up Big T win w/carb or cable operated Delphi Fits ’99-Up Big T win w/carb or cable operated Delphi Fits ’99-Up Big T win w/carb or cable operated Delphi Cover spacer, required for ‘08-up FXD w/ factory teardrop cover Replacement MaxFlow element only for 117-440 series kits

EFI, satin ﬁ nish

EFI, chrome ﬁ nish

EFI, black ﬁ nish

#117-448 #117-448B #117-448C #172-130

#117-440

MaxFlow 2 3/4” Factory Stage I Height

Fits ’08-’13 Big Twin w/throttle by wire EFI, satin ﬁ nish Fits ’08-’13 Big Twin w/throttle by wire EFI, black ﬁ nish Fits ’08-’13 Big Twin w/throttle by wire EFI, chrome ﬁ nish

Replacement MaxFlow element only for 117-448 series kits

Covers for MaxFlow Filters

Want that radical open element look for your MaxFlow or HighFlow ﬁ lter?

Install one of these chrome-plated billet beauties for striking looks and

maximum ﬂ ow.

PART NO. DESCRIPTION

#172-780 #172-781

5-1/2” round open air ﬁ lter cover, chrome smooth 5-1/2” round open air ﬁ lter cover, chrome scalloped

Zipper’s MaxFlow Stage I Upgrade Kits

Is your bike already equipped with a factory Stage I performance air cleaner? Raise the level another step! Our MaxFlow Stage I upgrade kit includes a specially

designed, 100% washable pleated fabric ﬁ lter made from multiple layers of surgical-

quality cotton gauze material that traps the smallest dirt particles while providing

dramatic ﬂ ow increases. The element is 5/8” deeper than the factory performance ﬁ lter it is designed to replace yielding over 60% more surface area than the Stage I ﬁ lter. The

kit includes required longer mounting hardware. 5-1/2” end diameter at cover mating surface. Takes about 5 minutes to install - the difference is immediately noticeable!

Note - This kit is designed to be used on Twin Cam Screamin’ Eagle® Stage I air cleaner and the standard T win Cam® “football” cover, which

makes 360º contact between the cover back and the rubber gasket on the ﬁ lter. Do

not install decorative cover inserts (due to increased weight) or use with 2006-up CVO Touring model oval covers that do not make 360º contact between the cover back and

the rubber gasket.

PART NO. DESCRIPTION

#117-298 #117-296 #117-297 #117-299

Fits ’08-‘13 Big T win w/throttle by wire EFI equipped with factory Stage I A/C kit Fits ’99-Up Big T win w/carb or cable operated Delphi® EFI equipped w/ factory Stage I A/C kit* Fits ’99-’01 Big Twin w/Marelli EFI equipped with factory Stage I A/C kit (4-bolt mounting) Fits ‘08-‘13 Big T win w/TBW equipped with 58mm H-D

*2008-Up Dyna® models using the factory teardrop cover must also order cover gasket #150-591 to correctly support cover

engines equipped with H-D

S.E. 29515-08 air ﬁ lter kit

#172-781#172-780

Stock

Upgrade

Products on this page are not for use on pollution controlled vehicles.

Zipper’s Performance Products

6655-A Amberton Drive, Elkridge, MD Phone: (410) 579-2828 Fax: (410) 579-2835

www.ZippersPerformance.com

Zippers@ZippersPerformance.com

Zipper’s HighFlow & MaxFlow Air Filter Kits

Zipper’s HighFlow Air Cleaner

for 2014-2015 ‘Rushmore’ Models

2014 brought a lot of changes to the Touring series bikes, including a new, distinctive air cleaner cover shape. Zipper’s designed a new air

cleaner that retains the Rushmore cover while increasing airﬂ ow 47%

over the factory system. The Rushmore cover is twice the weight of the previous ‘football’ cover so we felt it important to not only making

a substantial ﬂ ow increase, but to retain 360 degree support of the

outer cover for durability and longevity purposes. Backing plate is fully CNC machined from billet with radiused entry and additional

air inlet ports, ﬁ nished in black for a stealthy, almost un-noticeable

upgrade to the intake system. Fast and easy installation; oiled gauze HighFlow element is fully washable and re-useable, and the entire unit is USA-made!

PART NO. DESCRIPTION

Black, ﬁ ts 2014-2015 Touring models with ‘Rushmore’ cover#117-460

Complete HighFlow Air Filter Kits

These kits are similar to the MaxFlow air ﬁ lter kits except the ﬁ lter is the standard 2-1/4” deep. This ﬁ lter kit increases ﬂ ow without increasing the overall width of the air cleaner

for those with leg room concerns. Fits fuel injected and carbureted Twin Cam® engines equipped with the factory TC “football” cover. Available with satin aluminum, black or chrome plated breather ports.

PART NO. DESCRIPTION

#117-442 #117-442B #117-442C #150-591 #172-116

Fits ’99-Up Big Twin w/carb or cable operated EFI, satin ﬁ nish Fits ’99-Up Big Twin w/carb or cable operated EFI, black ﬁ nish Fits ’99-Up Big Twin w/carb or cable operated EFI, chrome ﬁ nish

Cover spacer, required for ‘08-up FXD w/ factory teardrop cover Replacement HighFlow element only for 117-442 series kits

#117-449 #117-449B #117-449C #172-128

Fits ’08-’13 Big Twin w/throttle by wire EFI, satin ﬁ nish Fits ’08-’13 Big Twin w/throttle by wire EFI, black ﬁ nish Fits ’08-’13 Big Twin w/throttle by wire EFI, chrome ﬁ nish

Replacement HighFlow element only for 117-449 series kits

MaxFlow Stage I AC Upgrade Kit For Evolution® Style Cover

These kits are very similar to the T win Cam® MaxFlow upgrade kits listed above except they are designed with

the ﬁ lter tapering outward towards the air ﬁ lter cover, allowing use of 8” diameter EV-style round covers. Can

be used on Evolution® or T win Cam

PART NO. DESCRIPTION

#162-295

#162-294

#162-297

Fits carb EV 80” engines equipped with H-D #29543-99 SE

the newer style die-cast backplate with venturi built-in and 3 separate mounting studs. Also

ﬁ ts TC Fits carb EV 80” engines equipped with H-D #29008-90A SE

air ﬁ lter uses the earlier style ﬂ at backplate with 3 threaded studs attached and a plastic venturi ring.

Fits ’99-’01 Marelli fuel injected TC engines equipped with H-D #29441-99 SE

bolt mounting). Requires round EV type cover (purchase separately).

Covers For MaxFlow Air Cleaners

with carb or cable Delphi® EFI when used with 8” round cover (purchase separately).

engines if the appropriate EV-style cover is used.

PART NO. COVERS FOR 7” EV-STYLE MAXFLOW

#150-291 #150-400 #172-794 #172-795 #172-770 #172-800 #172-771

Products on this page are not for use on pollution controlled vehicles.

(A) 8” full air ﬁ lter cover, chrome (B) 8” full air ﬁ lter cover, gloss black

(C) 8” open cover, chrome scalloped (D) 8” open cover, chrome smooth (billet) (D) 8” open cover, chrome smooth (steel) (E) 8” open cover, chrome ball milled (F) 8” open cover, wrinkle black (steel)

#117-449C

air ﬁ lter kit. This SE® air ﬁ lter uses

(pre-’99 design) air ﬁ lter kit. This SE

air ﬁ lter kit (4-

Zipper’s Performance Products

6655-A Amberton Drive, Elkridge, MD Phone: (410) 579-2828 Fax: (410) 579-2835

www.ZippersPerformance.com

Zippers@ZippersPerformance.com

Zipper's Performance MaxFlow Air Filter Kits User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual