Contents
Zip Varipoint II Installation, Maintenance and User Instructions - June 2004 3
Specification 4
Special notices 5
Dimensions 6
Installation
Requirements 7-8
Positioning 9
Plumbing 9
Electrical 10
Commissioning 10-11
Operation
Precautions 11-12
Maintenance
Schedule 13
Fault Finding 13
De-Install 13
Spare Parts 14
Specification
Product: Varipoint II.
Type: Unvented multipoint.
Capacity: 10 ltr, 15 ltr.
Loading: 2.2 kW.
Heating Element: Embedded rod type.
Thermostat: Capillary type adjustable 5° to 75° C.
Water vessel: Heavy gauge copper, tested at 16 Bar.
Working pressure 6 Bar.
Casing: Impact resistant white plastic.
Insulation: High density, CFC free, polyurethane foam.
Safety features: Expansion relief valve (supplied).
Manually resettable over temperature safety cutout.
Facility for optional T&P valve.
Water heater protected against frost when electricity is
switched on.
Safety temperature control knob.
Approvals: CE endorsed - WRAS approved.
Models: VP103 - 10 ltr overbasin.
VP153 - 15 ltr overbasin.
VP103UB - 10 ltr underbasin
VP153UB - 15 ltr underbasin
4 Zip Varipoint II Installation, Maintenance and User Instructions - June 2004
Special notices
These instructions should guide you through the fitting of the Zip Varipoint II,
however if you encounter a problem, just call 0870 608 8888 and ask for
Service Helpdesk.
■ The Zip Varipoint is an unvented water heater designed for connection
directly to the incoming mains water supply and can serve one or more
outlets using conventional taps.
■ Care should be taken that the capacity of the unit chosen is sufficient to
meet the demands of the outlets being supplied.
■ The casing is constructed from impact resistant plastic and heat losses
are minimised by the CFC free polyurethane foam insulation.
■ The inner vessel is heavy gauge copper and pressure tested to 16 Bar
■ An alloy sheathed heating element provides longer life in aggressive water
conditions.
■ A manually resettable safety cut-out automatically cuts off the electrical
supply to the heating element in the event of a malfunction.
If the hot-water system is not used for two weeks or more,
it is recommended that a hot tap be turned on for several
minutes at a sink, basin or bath, but not at a dishwasher,
clothes washer or other appliance.
Zip Varipoint II Installation, Maintenance and User Instructions - June 2004 5
Dimensions
Choose from 4 models
Model Over or Capacity Dimensions (mm) Weight (kg)
Under Basin (litres) A B C Empty Full
VP103 Over 10 452 300 285 6.5 16.5
VP103UB Under 10 452 300 285 6.5 16.5
VP153 Over 15 452 300 285 7.5 22.5
VP153UB Under 15 452 300 285 7.5 22.5
6 Zip Varipoint II Installation, Maintenance and User Instructions - June 2004
Loading...