ASSEMBLY INSTRUCTIONS
Coffee Table
Minutes
Thank you for purchasing our product!
Please refer and use this assembly instruction to assemble
the product.
Contact our customer service department in case there are
any missing or damage parts or hardware. Replacement
parts are normally shipped within 2 or 3 days.
We appreciate your business!
ASSEMBLY PREPARATION
1.
Remove all packaging materials, staples and packing straps from the carton.
2.
Refer to Parts List and Hardware List and ensure they are complete before you start assembling.
3.
Place all wooden parts on a clean, flat and soft surface (e.g. carpet or rug) to prevent parts from getting scratched.
1
SAFETY PRECAUTION
1.
KEEP ALL HARDWARE PARTS OUT OF REACH OF CHILDREN.
2.
DISPOSE PLASTIC PACKAGING MATERIAL IMMEDIATELY TO AVOID ANY RISK OF SUFFOCATION TO CHILDREN AND
ANIMALS.
TIPS FOR ASSEMBLY
1. Allow ample room for assembly and in close proximity to where product will be placed.
2. Assemble the product on a surface that does not scratch or damage the exterior gloss and finish of the furniture.
3. Please check all of the parts and quantities are included before assembly. Contact customer service for missing
parts.
4. Identify all of the parts, hardware and quantities required for each step.
5. During assembly, do not over-tighten any fittings as this may cause damage.
6. DO NOT USE POWER TOOLS TO ASSEMBLE THIS PRODUCT.
7. Always place the product on a flat surface.
8. Do not sit or stand on the partially assembled product; only use the product for which it is intended.
CARE AND MAINTENANCE
•
Use a slightly damp cloth to clean the product.
•
Do not use bleach or abrasive cleaning material. Check all the fittings periodically and re-tighten as
necessary.
•
Do not use the product if any of the parts is damaged or broken
•
Do not allow liquid to remain on the furniture. Liquid can cause damage to the furniture.
•
Do not place hot items (e.g. hot drinks) directly on furniture surface.
•
Do not drag, push or pull the furniture.
This product is for indoor and household use only - not for commercial use.
1/3
ASSEMBLY INSTRUCTIONS
Coffee Tables
PARTS LIST
Part # Part Name
(1)
(2)
Table Top
Leg
Dimension
(23.62"x23.62"x0.47")
(17.88"x1.38"x0.98")
1
Parts Assembly Overview
Quantity
1
3
2
1
2/3
2
Step 1:
a)
Place Table Top (1) bottom-side up, as shown, on a material that that does not scratch
or damage its surface.
b)
Fasten Leg (2) to the table top by screwing the bolt-end of the leg onto the Metal Plate
in a clockwise direction until the bolt-end of the leg fits the Metal Plate tightly.
c)
Position the table right-side up. The assembly of this table is complete.
ASSEMBLY INSTRUCTIONS
Coffee Tables
2
2
2
Metal Plate
1
3/3
Loading...