ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
However, the installation instructions do apply to this product.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture
and all hardware from Junction Box. Carefully unpack your new
fixture and lay out all the parts on a clear area. Take care not to lose
any small parts necessary for installation.
2. Attach the mounting plate to the junction box using two junction box
screws as shown. The side of the mounting plate marked “GND”
must face out. The junction box is not included.
3. Guide fixture wires through hole in center of mounting plate.
4. Follow wiring instructions carefully.(see fig.2)
5. Attach the back plate of the lamp body (B) onto the junction box,
aligning the back plate holes with screw hole of the mounting plate
in side, then lock it securely with mounting screws.
6. Install the light bulb(not included) in accordance with the fixture’s
specifications. NOTE: DO NOT EXCEED THE MAXIMUN
WATTAGE RATING!
7. Raise the glass(A) insert the cover of lamp holder, by turning it
clockwise until tight.
CONNECTING THE WIRES (Fig.2)
1. Connect the electrical wires as follows. Connect the Black wire from
the fixture to the black house (hot) Wire. Connect the white wire from
the fixture to the white (neutral) house wire. Make sure all wire nuts
are secured. You may wrap the connections with electrical tape. If
your outlet box has a ground wires (green or bare copper) connect
fixture’s ground wire to it. Otherwise attach the bare copper fixture
wire to the green ground screw on the mounting plate.
2. Tuck the wire connections neatly into the wall junction box.
Your installation is now complete. Return power to the junction
box and test the fixture.
Fig.1
Supply Ground Wire
Junction Box
(Not included)
Supply wire
Mounting plate
Fixture Ground Wire
Box screw
FIG.2
FIXTURE
WIRES
Black or
Smooth
Mounting screw
HOUSE
WIRES
Black(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
(Neutral)
WIRES
White
A
B
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green or Bare
Copper(Ground)
Loading...