
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may
have come loose inside the carton during shipment. Separate, identify and count all parts and hardware. Compare with
the parts list to be sure all parts are present.
IMPORTANT : PLEASE READ INSTRUCTION BEFORE STARTING THE ASSEMBLY.
"DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ASSEMBLED"
"DO NOT OVERTIGHT ANY HARDWARE"
WARNING : SMALL PARTS AND HARDWARE NOT FOR CHILDREN UNDER 3 YEARS. ADULT ASSEMBLY REQUIRED.
Skip the power trip this time.
1. Screwdriver (not provide)

CSK C/B SCREW (M4 x 32MM)

MORE PARTS DETAIL IN NEXT PAGE...
HEADBOARD LEG
WITH LABEL “L”
HEADBOARD LEG
WITH LABEL “R”

Insert 6pcs (C) , (D) and (E) to combine (2) and (3) to the (1) as shown.
Insert 16pcs (B) , (D) and (E) to combine (8) to (6) and (7) as shown.
Open zipper to get
all other parts.

Insert 8pcs (B) , (D) and (E) to combine 2pcs (9) to (6) and (7) as shown.
Turn (5) clockwise to combine it to (4) .

Insert 4pcs (C) to combine (11) and (12) to the (10) as shown.
Insert 8pcs (A) to combine 2pcs (6) and (7) to the headboard leg and footbaord as shown.

Put the slat to the inside of bed frame , then insert 8pcs (F) to tighten the slat.