
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJ ON CTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture and
all hardware from Junction Box.
2. Carefully unpack your new fixture and lay out all the parts on a clear
area. Take care not to lose any small parts necessary for inst allation.
3. Thread the two mounting screws about 1/4” into the pre-drilled holes
in the mounting plate spaced the same distance apart as the holes in
the canopy.
4. Attach the mounting plate to the Junction Box with the two Junction
Box Screws as shown. The side of the mounting plate marked
"GND" must face out. The junction box is not included.
5. Attach the glass shade(B) and collar ring(C) to bottom of the lamp
holder, then lock it securely with check ring(D) until snug.
6. Install the light bulbs(Not included) in accordance with the fixture
specifications. NOTE: DO NOT EXCEED THE SPECIFIED
WATTAGE!
7. While holding the lamp body towards the ceiling, connect the
electrical wires as Shown in Fig.2, making sure that all wire nuts are
secured. You may have to wrap the connections with electrical tape.
If your outlet has a ground wire (green or bare copper), connect the
fixture ground wire to it. Otherwise connect fixture’s ground wire
directly to the mounting plate with the green screw provided. After
wires are connected, tuck them carefully inside the Junction Box.
8. Raise the lamp body onto the junction box, aligning screws on
mounting plate with mounting holes in canopy, lock it securely with
the ball nut (E).
Your installation is now complete. Return power to the junction
box and test the fixture.
FIG.1
FIG.2
ALL RIGHTS RESERVED
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black(Hot)
FIXTURE
WIRES
White or
Ribbed
HOUSE
WIRES
White
(Neutral)
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
Green or Bare
Copper(Ground)